1. Introduksjon og overview
The Massive Audio SUMMOXL104 is a high-performance 10-inch subwoofer designed for car audio systems. It features a dual 4 Ohm voice coil configuration, allowing for flexible wiring options to match various amplifier setups. This subwoofer is engineered to deliver powerful and accurate bass reproduction, enhancing your in-car audio experience. Proper installation and configuration are crucial for optimal performance and longevity.
Bilde 1.1: Foran view of the Massive Audio SUMMOXL104 10-inch Subwoofer.
2. Pakkens innhold
Kontroller at alle varene er til stede i pakken før du fortsetter med installasjonen.
- Massive Audio SUMMOXL104 10 Inch Subwoofer (1 unit)
3. Spesifikasjoner
Refer to the following specifications for detailed information about your SUMMOXL104 subwoofer:
| Trekk | Spesifikasjon |
|---|---|
| Merke | Massive Audio |
| Modellnummer | SUMMOXL104 |
| Subwooferdiameter | 10 tommer |
| Topphåndtering | 3000 watt |
| RMS Power Handling | 1500 watt |
| Impedans | Dobbel 4 ohm |
| Frekvensrespons | 250 Hz (øvre grense) |
| Monteringsdybde | 6.81 tommer |
| Monteringsbredde | 9.21 tommer |
| Varedimensjoner (D x B x H) | 10.6" D x 10.6" B x 7.4" H |
| Varevekt | 11.9 pund |
| Innkapslingsmateriale | Aluminium |
| Tilkoblingsteknologi | Kablet |
The subwoofer features a red stitched edge to the cone for added strength and a black anodized one-piece pole-plate for enhanced motor force.
Bilde 3.1: Topp view highlighting the cone and surround construction.
4. Oppsett og installasjon
Proper installation is critical for the performance and safety of your subwoofer. It is highly recommended that installation be performed by a qualified car audio professional.
4.1 Krav til innkapsling
The SUMMOXL104 subwoofer requires a suitable enclosure for optimal sound reproduction. Consult with a car audio specialist or refer to recommended enclosure designs for sealed or ported configurations that match the subwoofer's parameters and your vehicle's acoustics.
4.2 Wiring Configurations
The SUMMOXL104 features a dual 4 Ohm voice coil. This allows for several wiring options to achieve different final impedance loads at your amplifier. Common configurations include:
- 1 Ohm Load: Wire both 4 Ohm voice coils in parallel.
- 8 Ohm Load: Wire both 4 Ohm voice coils in series.
Sørg for din amplifier is stable and capable of driving the chosen impedance load. Incorrect wiring can damage both the subwoofer and the amplivligere.
4.3 Montering
Securely mount the subwoofer within its enclosure using appropriate hardware. Ensure there is adequate clearance for the subwoofer's excursion and that the mounting surface is rigid to prevent vibrations and rattles.
Bilde 4.1: Eks.ample of a SUMMOXL104 subwoofer installed in a vehicle trunk.
Image 4.2: Multiple SUMMOXL104 subwoofers in a custom installation.
Image 4.3: Subwoofers and amplifiers integrated into a trunk setup.
Image 4.4: Professional installation of multiple subwoofers.
5. Bruksanvisning
5.1 Innkjøringsperiode
Allow a break-in period of approximately 20-30 hours of normal listening at moderate volumes before operating the subwoofer at its maximum potential. This allows the suspension components to loosen and achieve optimal performance.
5.2 Amplifier Matching and Gain Settings
Sørg for din amplifier's RMS power output matches the subwoofer's RMS power handling (1500 Watts). Set the amplifier gain correctly to prevent clipping and distortion, which can damage the subwoofer. Use a digital multimeter or an oscilloscope for accurate gain setting, or consult a professional.
5.3 Delefilterinnstillinger
Bruk din amplifier's or head unit's low-pass filter (LPF) to send only low frequencies to the subwoofer. A typical LPF setting for a 10-inch subwoofer is between 60Hz and 100Hz, with a slope of 12dB or 24dB per octave. Adjust this setting to blend seamlessly with your main speakers.
6. Vedlikehold
The SUMMOXL104 subwoofer requires minimal maintenance. Periodically inspect the subwoofer for any signs of damage to the cone, surround, or dust cap. Ensure all wiring connections are secure and free from corrosion. Clean the subwoofer's exterior with a soft, dry cloth. Avoid using harsh chemicals or excessive moisture.
7. Feilsøking
If you experience issues with your subwoofer, perform the following basic checks:
- Ingen lyd: Check all power, ground, and signal connections. Verify the amplifier is powered on and not in protection mode. Ensure the head unit is sending an audio signal.
- Forvrengt lyd: Redusere amplifier gain. Check for proper crossover settings. Inspect the subwoofer cone and surround for physical damage. Ensure the enclosure is sealed properly if it's a sealed design.
- Svak bass: Verify correct wiring impedance for your ampsikringsskaper. Sjekk amplifier gain and crossover settings. Ensure the enclosure volume is appropriate for the subwoofer.
- Overoppheting: Sørg for tilstrekkelig ventilasjon for amplifier. Verify the impedance load is within the amplifier's stable operating range. Reduce prolonged high-volume playback.
If problems persist after performing these checks, consult a qualified car audio technician.
8. Offisiell produktvideo
Se den offisielle produktvideoen for en oversiktview of Massive Audio products and their applications.
Video 8.1: Massive Audio promotional video showcasing various products and installations.
9. Garanti og støtte
The Massive Audio SUMMOXL104 subwoofer comes with a 1 års begrenset garanti from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, abuse, accident, neglect, or unauthorized modifications.
For warranty claims or technical support, please contact Massive Audio customer service through their official webnettstedet eller autoriserte forhandlere. Ta vare på kjøpsbeviset for garantivalidering.