Acctim 71717X Chula RC Digital LCD Alarm Clock User Manual

1. Introduksjon

This manual provides instructions for the setup, operation, and maintenance of your Acctim 71717X Chula RC Digital LCD Alarm Clock. Please read this manual thoroughly before using the product to ensure correct operation and to prevent damage.

The Acctim 71717X is a radio-controlled digital alarm clock featuring a multi-functional LCD display. It automatically sets and adjusts for daylight saving time (summer/winter time) based on the UK Atomic clock signal. Key features include a green backlight, dual alarm settings, calendar display, and indoor temperature display.

2. Sikkerhetsinformasjon

• Ikke utsett enheten for ekstreme temperaturer, direkte sollys eller høy luftfuktighet.
• Avoid dropping or subjecting the clock to strong impacts.
• Ikke bland gamle og nye batterier, eller forskjellige typer batterier.
• Ta ut batteriene hvis enheten ikke skal brukes over en lengre periode.
• Rengjør klokken med en myk, tørr klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• Dette produktet er kun beregnet for innendørs bruk.

3. Pakkens innhold

• Acctim 71717X Chula RC Digital LCD Alarm Clock
• Brukerhåndbok (dette dokumentet)

Merk: 2 x AA-batterier kreves og er ikke inkludert i pakken.

4. Produktet er overview

Gjør deg kjent med de ulike delene og kontrollene på vekkerklokken din.

Figur 4.1: Foran View of the Alarm Clock. This image displays the clock's front face, including the large LCD screen showing time, date, day, and temperature, along with the control buttons located below the display.

Kontroller på frontpanelet:

• TIME-knapp: Used to set the current time manually.
• ALARM-knapp: Brukes til å stille inn og aktivere alarmer.
• SOUND Button: Used to adjust alarm sound settings.
• Nullstillknapp: Resets the clock to default settings.
• °C/°F-knapp: Veksler mellom temperaturvisning i Celsius og Fahrenheit.
• 12/24-knapp: Veksler mellom 12-timers og 24-timers tidsformat.
• UP (▲) Button: Used to increase values during setting.
• NED (▼)-knapp: Used to decrease values during setting.

Topppanel:

• SNOOZE/LYS-knapp: Activates snooze function during an alarm or illuminates the backlight.

Figur 4.2: Øverst View of the Alarm Clock. This image highlights the prominent SNOOZE/LIGHT button located on the top surface of the clock.

Bakpanel:

• Batterirom: Har 2 x AA-batterier.
• Alarm ON/OFF Switches (Alarm 1, Alarm 2): Individual switches to enable or disable each alarm.

Figur 4.3: Bak View of the Alarm Clock. This image shows the back of the clock, detailing the battery compartment cover and the two alarm ON/OFF switches on either side.

5. Oppsett

5.1 Installasjon av batteri

1. Open the battery compartment cover located on the rear of the clock (refer to Figure 4.3).
2. Insert 2 x AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
3. Lukk batteridekselet godt.

5.2 Initial Power-On and Radio Control Signal Reception

Upon battery installation, the clock will automatically attempt to receive the radio-controlled time signal. This process may take several minutes to an hour, depending on your location and environmental conditions.

• Plasser klokken i nærheten av et vindu for optimal signalmottak.
• Unngå å plassere den i nærheten av elektroniske enheter som kan forårsake forstyrrelser.
• A signal icon (often a tower or waves) on the LCD will indicate signal reception status. A solid icon means successful reception.
• Once the signal is received, the time, date, and day will automatically set.

Important Note: The radio-controlled signal may be temporarily unavailable due to scheduled annual maintenance. Please refer to product information for specific dates if automatic synchronization fails.

6. Bruksanvisning

6.1 Manuell tidsinnstilling

If the radio-controlled signal is not available or you prefer to set the time manually:

1. Trykk og hold inne TID button until the hour display starts flashing.
2. Bruk OPP (▲) or NED (▼) knapper for å justere timen.
3. Trykk på TID knappen igjen for å bekrefte timeinnstillingen og gå videre til minuttinnstillingen.
4. Bruk OPP (▲) or NED (▼) knapper for å justere minuttene.
5. Trykk på TID knappen én gang til for å bekrefte og avslutte tidsinnstillingsmodus.

6.2 Setting Date and Day

The date and day are usually set automatically with the radio signal. If manual adjustment is needed:

1. In time setting mode (see 6.1), after setting minutes, press TID again to cycle through year, month, and day settings.
2. Bruk OPP (▲) or NED (▼) knappene for å justere verdiene.
3. Pressen TID to confirm each setting and move to the next, then to exit.

6.3 Stille inn alarmer (Alarm 1 og Alarm 2)

The clock features two independent alarm settings.

1. Trykk på ALARM knappen en gang til view Alarm 1 time. Press again to view Alarm 2 gang.
2. Mens viewfor å stille inn ønsket alarm (f.eks. Alarm 1), trykk og hold inne ALARM knappen til alarmtimen begynner å blinke.
3. Bruk OPP (▲) or NED (▼) knapper for å justere alarmtiden.
4. Trykk på ALARM button again to confirm the hour and move to alarm minute setting.
5. Bruk OPP (▲) or NED (▼) knappene for å justere alarmminuttene.
6. Trykk på ALARM knappen én gang til for å bekrefte og avslutte alarminnstillingsmodus.
7. To activate an alarm, slide the corresponding Alarm PÅ/AV bryter (Alarm 1 or Alarm 2) on the rear of the clock to the "ON" position. An alarm icon will appear on the display.

6.4 Snooze-funksjon og bakgrunnsbelysning

• Utsett: Når en alarm går, trykk på den store SNOOZE / LIGHT button on the top of the clock. The alarm will pause for approximately 5-10 minutes and then sound again.
• Bakgrunnsbelysning: Trykk på SNOOZE / LIGHT button at any time to illuminate the green backlight for a few seconds.

6.5 Temperature Display (°C/°F)

Trykk på ° C / ° F button on the front panel to switch the indoor temperature display between Celsius and Fahrenheit.

6.6 12/24 timers format

Trykk på 12/24 button on the front panel to toggle the time display between 12-hour (with AM/PM indicator) and 24-hour formats.

7. Vedlikehold

7.1 Rengjøring

Wipe the clock with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or internal components.

7.2 Batteribytte

When the display becomes dim or the clock stops functioning, it's time to replace the batteries. Follow the steps in Section 5.1 for battery installation. Always replace both AA batteries at the same time.

8. Feilsøking

9. Spesifikasjoner

• Modell: Acctim 71717X Chula
• Type: Digital LCD-vekkerklokke
• Materiale: Plasthus
• Dimensjoner: Approximately 8.5 cm (Width) x 9.4 cm (Height) x 4 cm (Depth)
• Strømkilde: 2 x AA-batterier (ikke inkludert)
• Spesielle funksjoner: Radio-controlled time, Dual alarm, Snooze, Green backlight, Calendar display, Indoor temperature display (°C/°F).

Figure 9.1: Alarm Clock Dimensions. This image illustrates the approximate width (8.5cm) and height (9.4cm) of the clock.

10. Garanti og støtte

Specific warranty information for the Acctim 71717X Chula RC Digital LCD Alarm Clock is not provided in this manual. For warranty details, product support, or service inquiries, please refer to the documentation included with your purchase or contact Acctim customer service directly.

You may also visit the official Acctim webnettstedet for ytterligere hjelp.