Progress Lighting Verdae Collection Outdoor Wall Lantern

Introduksjon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting Verdae Collection 3-Light Clear Seeded Glass New Traditional Outdoor Large Wall Lantern Light. This fixture features a traditional design with clear seeded glass and an Antique Bronze finish, suitable for various exterior settings. The open bottom design facilitates easy lamp erstatning.

Image 1: The Verdae Collection Outdoor Wall Lantern, showcasing its Antique Bronze finish and clear seeded glass panels.

Sikkerhetsinformasjon

ADVARSEL: Fare for elektrisk støt. Koble fra strømmen ved sikringsskapet eller sikringsbryteren før installasjon eller service.

• Alle elektriske tilkoblinger må være i samsvar med lokale forskrifter, forordninger eller National Electric Code (NEC).
• Kontakt en kvalifisert elektriker hvis du ikke er kjent med elektriske ledninger.
• Bruk vernebriller og passende verneutstyr under installasjonen.
• Håndter glasskomponenter forsiktig for å unngå brudd.
• Ensure the fixture is securely mounted to a structural element.
• Ikke overskrid maksimumsverdientage spesifisert for pærene.

Pakkeinnhold

Kontroller at alle komponenter er til stede før installasjonen starter:

• Outdoor Wall Lantern Fixture (1)
• Monteringsmaskinvaresett (1)
• Installation Sheet (1)

Note: Lyspærer er ikke inkludert og må kjøpes separat.

Spesifikasjoner

Image 2: Dimensional drawing of the Verdae Outdoor Wall Lantern, indicating a height of 21-3/4 inches and a width of 10-3/8 inches.

Oppsett og installasjon

Follow these general steps for installation. Refer to the included installation sheet for detailed, model-specific instructions.

1. Forbered for installasjon: Turn off power at the circuit breaker or fuse box. Ensure the power is completely disconnected before proceeding.
2. Montering av monteringsbrakett: Attach the mounting bracket to the electrical junction box using the provided screws. Ensure it is securely fastened.
3. Elektriske tilkoblinger: Connect the fixture's wires to the house wiring according to standard electrical codes (black to black, white to white, ground to ground). Use approved wire connectors and ensure all connections are secure.
4. Festemontering: Carefully align the fixture with the mounting bracket and secure it in place using the provided hardware. Ensure the fixture is flush against the wall and stable.
5. Installer pærer: Insert three E12 base bulbs (max 60W each, not included) into the sockets. The open bottom design allows for easy access.
6. Gjenopprett kraften: Når installasjonen er fullført og alle komponentene er sikre, gjenoppretter du strømmen ved sikringsbryteren.

Bilde 3: Et nærbilde view of the lantern's base, illustrating the open bottom design for convenient bulb replacement.

Bruksanvisning

This outdoor wall lantern operates via a standard wall switch or a remote-compatible switch (if installed). Once the fixture is properly installed and power is restored:

• Vri veggbryteren til «PÅ»-posisjonen for å tenne lampen.
• Vri veggbryteren til «AV»-posisjonen for å slå av armaturen.
• If a remote-controlled switch is used, refer to the instructions provided with your specific remote control system.

Vedlikehold

• Rengjøring: To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
• Bytte av pære: Turn off power at the circuit breaker. Allow bulbs to cool completely. Unscrew old bulbs and replace with new E12 base bulbs (max 60W each). The open bottom design provides easy access for this task.
• Undersøkelse: Inspiser armaturen regelmessig for tegn på slitasje, skade eller løse forbindelser. Løs eventuelle problemer umiddelbart.

Bilde 4: En detaljert view of the clear seeded glass, which provides a traditional aesthetic and diffuses light.

Feilsøking

If you encounter issues with your outdoor wall lantern, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.

Garanti og støtte

This Progress Lighting product is covered by a 1 års begrenset garanti from the date of purchase. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.

The warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

For warranty claims, technical assistance, or to inquire about replacement parts, please contact Progress Lighting customer service. Refer to the contact information provided on the original packaging or the official Progress Lighting webnettstedet.