PeakTech P 2800A Professional Laser Distance Meter User Manual

1. Introduksjon

The PeakTech P 2800A is a professional laser distance meter designed for precise and reliable measurements in various applications, including construction, architecture, and landscaping. This device offers a measurement range from 0.05 meters to 40 meters with high accuracy. It features a multi-line backlit LCD display and quick selection keys for advanced functions such as area, volume, and Pythagorean calculations, as well as addition and subtraction. The internal memory can store up to 99 measurement values for convenient recall. An integrated 90° flip-out stop ensures accurate alignment from edges or corners, enhancing measurement precision.

2. Sikkerhetsinstruksjoner

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in laser radiation exposure, electric shock, fire, or serious injury.

• Lasersikkerhet: This device uses a Class 2 laser. Do not stare directly into the laser beam or direct it at other people or reflective surfaces. Laser radiation can cause eye injury.
• Batterisikkerhet: Use only specified alkaline AAA batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period to prevent leakage.
• Driftsmiljø: Do not operate the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep the device away from water and high humidity.
• Vedlikehold: Ikke forsøk å modifisere eller demontere enheten. Reparasjoner skal kun utføres av kvalifisert personell.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• PeakTech P 2800A Laser Distance Meter
• Beltepose
• 2 x 1.5 V AAA alkaliske batterier
• User Manual (German and English)
• Bekreftelse av kalibrering

4. Enhet overview

Familiarize yourself with the components and controls of your PeakTech P 2800A Laser Distance Meter.

Figur 1: PeakTech P 2800A Laser Distance Meter front view, showing the multi-line LCD display and control buttons. This image provides a general overview of the device's layout.

Figur 2: PeakTech P 2800A Laser Distance Meter mounted on a mini tripod, demonstrating its tripod thread for stable and precise measurements, especially over longer distances.

Figur 3: Nærbilde view of the integrated bubble level on the PeakTech P 2800A Laser Distance Meter, used to ensure the device is perfectly horizontal for accurate measurements.

Figur 4: PeakTech P 2800A Laser Distance Meter with its 90-degree flip-out stop extended, used for precise measurements from edges or corners, ensuring the measurement starts exactly from the reference point.

Key Buttons and Display Elements:

• MEAS (Red Button): Initiates measurement, confirms selections.
• OFF/CLEAR (Red Button): Powers off the device, clears current measurement/selection.
• ENHET: Changes measurement units (m, in, ft).
• +: Addition function, navigates menus.
• -: Subtraction function, navigates menus.
• Area/Volume Button: Toggles between area and volume measurement modes.
• Pythagorean Button: Activates indirect measurement modes.
• Referansepunktknapp: Changes the measurement reference point (front, rear, flip-out stop).
• Minneknapp: Accesses stored measurements.
• Bakgrunnslysknapp: Toggles display backlight.
• LCD-skjerm: Multi-line display showing current measurements, previous results, and function icons.

5. Oppsett

5.1 Installasjon av batteri

1. Finn batteridekselet på baksiden av enheten.
2. Skyv eller løsne dekselet for å åpne rommet.
3. Insert two 1.5V AAA alkaline batteries, ensuring correct polarity (+/-).
4. Lukk batteridekselet godt.

The device will automatically power on or can be powered on by pressing the MEAS knapp.

6. Bruksanvisning

6.1 Strøm på/av

• Strøm på: Trykk på MEAS knapp.
• Slå av: Trykk og hold inne AV/SLETT button for a few seconds, or the device will automatically power off after approximately 150 seconds of inactivity.

6.2 Endre måleenheter

Trykk på ENHET button repeatedly to cycle through the available units: meters (m), inches (in), and feet (ft).

6.3 Innstilling av referansepunktet

The device can measure from its front edge, rear edge, or the extended 90° flip-out stop. Press the Referansepunkt button to switch between these options. The current reference point is indicated on the display.

6.4 Måling av enkeltavstand

1. Rett laseren mot målet.
2. Trykk på MEAS knappen én gang for å aktivere laseren.
3. Trykk på MEAS button again to take the measurement. The result will be displayed.

6.5 Kontinuerlig måling (min/maks)

1. Trykk og hold inne MEAS button for approximately 2 seconds. The device will enter continuous measurement mode.
2. Move the device slowly to measure different points. The display will show the current, minimum, and maximum measured distances.
3. Pressen MEAS igjen for å stoppe kontinuerlig måling.

6.6 Arealmåling

1. Trykk på Areal/volum button once to enter area measurement mode. An icon for area will appear on the display.
2. Mål den første siden (f.eks. lengden) ved å trykke på MEAS.
3. Mål den andre siden (f.eks. bredden) ved å trykke på MEAS.
4. Det beregnede området vil bli vist.

6.7 Volummåling

1. Trykk på Areal/volum button twice to enter volume measurement mode. An icon for volume will appear.
2. Mål lengden ved å trykke på MEAS.
3. Mål bredden ved å trykke på MEAS.
4. Mål høyden ved å trykke på MEAS.
5. Det beregnede volumet vil vises.

6.8 Pytagoreisk måling (indirekte måling)

This function allows indirect measurement of heights or distances using the Pythagorean theorem. There are typically several modes (e.g., two-point, three-point). Refer to the on-screen icons for guidance.

1. Trykk på Pythagoras button to select the desired indirect measurement mode.
2. Follow the on-screen prompts to take the required measurements (e.g., hypotenuse, base).
3. The device will calculate and display the unknown height or distance.

6.9 Addisjon og subtraksjon

Etter at du har tatt en måling, kan du legge til eller trekke fra påfølgende målinger:

1. Ta en måling.
2. Trykk på + button for addition or - button for subtraction.
3. Take the next measurement. The result will be added to or subtracted from the previous value.
4. Gjenta etter behov.

6.10 Minnefunksjon

The device can store up to 99 measurement values.

• Lager: Measurements are automatically stored.
• Minnes: Trykk på Hukommelse knappen til view stored values. Use the + og - buttons to scroll through the memory.
• Tøm minne: Refer to the detailed user manual for specific instructions on clearing memory, as this may vary.

7. Vedlikehold

• Rengjøring: Bruk en myk, damp cloth to clean the device. Do not use abrasive cleaners or solvents. Clean the laser lens carefully with a soft cloth, similar to cleaning camera lenses.
• Lagring: Store the device in its belt pouch in a cool, dry place when not in use. Remove batteries if storing for extended periods.
• Batteribytte: Skift batteriene når indikatoren for lavt batterinivå vises på displayet.

8. Feilsøking

9. Spesifikasjoner

10. Garanti og støtte

PeakTech products are manufactured with high quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your local PeakTech distributor. For technical support or service inquiries, please visit the official PeakTech webnettstedet eller kontakt deres kundeserviceavdeling.