Telwin 807591 Touring 11 Battery Charger 6/12V User Manual

1. Introduksjon

The Telwin Touring 11 is an advanced battery charger designed for various types of accumulators, including WET, GEL, Pb-Ca, AGM, MF, and EFB, operating at both 6V and 12V. It features electronic control of charging phases, automatic interruption, and resumption (TRONIC system) to ensure optimal and safe charging. The unit provides clear LED indicators for battery charge status and incorporates multiple safety protections.

2. Sikkerhetsinformasjon

Please read and understand all safety instructions before operating the battery charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always operate the charger in a well-ventilated area.
• Ikke utsett laderen for regn eller overdreven fuktighet.
• Sørg for at laderen er koblet fra strømnettet før du kobler til eller fra batteriet.
• Unngå å lade frosne batterier.
• Wear appropriate eye protection and clothing when working with batteries.
• Oppbevares utilgjengelig for barn.
• Dette apparatet er ikke beregnet for bruk av personer (inkludert barn) med reduserte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og kunnskap, med mindre de har fått tilsyn eller instruksjoner om bruk av apparatet av en person som er ansvarlig for deres sikkerhet.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• Telwin Touring 11 Battery Charger unit
• Strømkabel
• Battery connection clamps (rød og svart)
• Brukerhåndbok (dette dokumentet)

4. Produktfunksjoner

The Telwin Touring 11 Battery Charger offers the following key features:

• TRONIC System: Electronic control of charging phases with automatic interruption and resumption.
• Allsidig lading: Suitable for WET, GEL, Pb-Ca, AGM, MF, EFB battery types.
• Dual Voltage: Charges 6V and 12V batteries.
• LED-indikatorer: Clear display of battery charge status (MIN, 25%, 50%, 75%, MAX).
• Sikkerhetsbeskyttelse: Built-in protection against overloads, polarity inversions, and automatic battery voltage anerkjennelse.
• Kompakt design: Lightweight and compact for easy handling and storage.
• Integrert lagring: Practical rear compartment for cables and clamps.

Figure 4.1: Telwin Touring 11 Battery Charger with its included red and black battery clamps.

5. Oppsett

1. Pakk ut laderen: Carefully remove the battery charger and all accessories from the packaging.
2. Inspiser for skade: Check the charger and cables for any signs of damage. Do not use if damaged.
3. Ventilasjon: Place the charger in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
4. Batteriforberedelse: Ensure the battery to be charged is clean and free of corrosion on its terminals. If it's a WET battery, check the electrolyte levels and top up with distilled water if necessary, ensuring proper ventilation during charging.

Figur 5.1: Øverst view of the Telwin Touring 11 Battery Charger, highlighting the control panel and fuse location.

6. Bruksanvisning

1. Koble til batteri:
   • Koble til rød (+) clamp til plusspolen på batteriet.
   • Koble til svart (-) clamp til den negative polen på batteriet.
   • Sørg for at tilkoblingene er sikre og fri for korrosjon.
2. Velg Voltage: Bruk voltage selection switch on the charger's front panel to choose between 6V or 12V, matching the voltage of the battery you are charging.
3. Koble til strømnettet: Plug the charger's power cable into a 230V AC mains outlet.
4. Ladeprosess:
   • The charger will automatically detect the battery and begin the charging process (TRONIC system).
   • The LED indicators (MIN, 25%, 50%, 75%, MAX) will illuminate sequentially to show the current charge status of the battery.
   • Once the battery is fully charged, the "MAX" LED will remain steadily lit, and the charger will automatically switch to maintenance mode or stop charging to prevent overcharging.
5. Kobler fra:
   • First, disconnect the charger from the mains power outlet.
   • Deretter kobler du fra svart (-) clamp fra batteriets negative pol.
   • Til slutt, koble fra rød (+) clamp fra batteriets positive pol.

Figure 6.1: Close-up of the 6V/12V voltage selector switch on the Telwin Touring 11 charger.

7. Vedlikehold

• Rengjøring: Disconnect the charger from power before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
• Kabel og Clamp Undersøkelse: Regularly inspect the power cable and battery clamps for any signs of damage, fraying, or corrosion. Replace damaged components immediately.
• Lagring: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Utilize the rear compartment for cable and clamp lagring.
• Bytte sikring: The charger is equipped with a 5A mains fuse. If the charger fails to power on, check and replace the fuse if necessary. Ensure to use a fuse of the correct rating (5A).

8. Feilsøking

9. Spesifikasjoner

10. Garantiinformasjon

Specific warranty details for the Telwin Touring 11 Battery Charger may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for detailed information regarding warranty coverage, terms, and conditions. Keep your proof of purchase for warranty claims.

11. Støtte

For technical assistance, spare parts, or further inquiries, please contact Telwin customer support or visit the official Telwin webnettstedet. Kontaktinformasjonen finner du vanligvis på produktemballasjen eller på produsentens webnettstedet.

Telwin Official Webnettsted: www.telwin.com