SatelliteSale AT&T DIRECTV DSWM30 Satellite Multiswitch User Manual

1. Introduksjon

The SatelliteSale AT&T DIRECTV DSWM30 Satellite Multiswitch is designed to distribute satellite signals to multiple tuners in large-scale installations. This multiswitch supports up to 30 tuners across two banks of 15, facilitating efficient signal management for DIRECTV systems. It is compatible with 4K content and can be used with international World DIRECT dishes.

This manual provides essential information for the proper installation, operation, and maintenance of your DSWM30 multiswitch to ensure optimal performance and longevity.

2. Sikkerhetsinformasjon

Please read and understand all safety instructions before installing or operating the DSWM30 multiswitch. Failure to follow these instructions may result in injury or damage to the equipment.

• Strømkilde: Ensure the multiswitch is powered by the specified PI-29 Power Inserter (sold separately). Using an incorrect power source can damage the unit.
• Installasjonsmiljø: Install the multiswitch in a dry, protected location, away from direct sunlight, rain, and extreme temperatures.
• Kabling: Use high-quality coaxial cables with proper shielding to prevent signal loss and interference.
• Jording: Ensure proper grounding of the satellite dish and multiswitch according to local electrical codes.
• Service: Do not attempt to open or service the multiswitch yourself. Refer all servicing to qualified personnel.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• 1 x SatelliteSale AT&T DIRECTV DSWM30 Satellite Multiswitch
• Mounting Screws (if included)

Note: The PI-29 Power Inserter is required for operation and is sold separately.

4. Produktet er overview

The DSWM30 multiswitch is designed for robust performance in satellite signal distribution. It features multiple input and output ports for connecting to a satellite dish and various receivers.

Nøkkelfunksjoner:

• Supports two banks of 15 tuners (no MoCA/MRV crossover) for a total of 30 tuners.
• Functions as a replacement for SWM-8, SWM-16, and SWM-32 multiswitches.
• Compatible with previous generation Slimline dishes, Genie, and Genie 2 systems.
• Provides 13V, 500mA power output for coax-powered devices.
• Requires a PI-29 Power Inserter (sold separately) for operation.

5. Oppsett og installasjon

Follow these steps for proper installation of your DSWM30 multiswitch:

1. Montering: Securely mount the DSWM30 multiswitch in a suitable, protected location using appropriate screws. Ensure adequate ventilation around the unit.
2. Satellite Dish Connection: Connect the coaxial cables from your DIRECTV satellite dish (e.g., Slimline dish) to the input ports on the DSWM30 multiswitch. Refer to the labels on the multiswitch for correct input connections (e.g., 99/101, 103/110/119, 95/99RB, 103RB).
3. Mottakertilkobling: Connect SWM-capable DIRECTV receivers (H21 or higher, D12, HR20 or higher, HS17) to the SWM1 and SWM2 output ports on the multiswitch. Each SWM output can support up to 15 tuners.
4. Power Inserter Connection: Connect the PI-29 Power Inserter (sold separately) to the PWR port on the DSWM30 multiswitch. Ensure the power inserter is plugged into a functional electrical outlet. The multiswitch requires this external power source to operate.
5. WorldDIRECT Dish (Optional): If using an international WorldDIRECT dish, a WD-DIPLEXER-09 diplexer (sold separately) is required for proper integration.
6. Bekreft tilkoblinger: Double-check all coaxial cable connections to ensure they are tight and secure. Loose connections can lead to signal loss or intermittent service.

6. Bruksanvisning

Once properly installed and powered, the DSWM30 multiswitch operates automatically to distribute satellite signals.

• Strømindikator: A green LED light on the multiswitch (refer to Figure 4.2) indicates that the unit is receiving power and functioning correctly.
• Signaldistribusjon: The multiswitch will automatically route the appropriate satellite signals to the connected SWM-capable receivers.
• Tuner Support: Each SWM output (SWM1, SWM2) can support up to 15 tuners. Ensure your receiver configuration does not exceed this limit per output.
• Coax-Powered Devices: The PWR OUT 13V 500mA port can be used to power compatible coax-powered devices, if needed.

7. Vedlikehold

The DSWM30 multiswitch requires minimal maintenance to ensure reliable operation.

• Rengjøring: Periodically wipe the exterior of the multiswitch with a soft, dry cloth to remove dust. Do not use liquid cleaners or solvents.
• Kabelinspeksjon: Regularly inspect all coaxial cable connections for signs of wear, corrosion, or looseness. Tighten or replace cables as necessary.
• Miljøsjekk: Ensure the installation environment remains dry and free from excessive heat or moisture.

8. Feilsøking

If you encounter issues with your DSWM30 multiswitch, refer to the following troubleshooting guide:

9. Spesifikasjoner

10. Garantiinformasjon

The SatelliteSale AT&T DIRECTV DSWM30 Satellite Multiswitch comes with a 1 års produsentgaranti. Denne garantien dekker defekter i materialer og utførelse ved normal bruk.

Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or contact the manufacturer directly.

11. Støtte

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer, SatelliteSale. You may find contact information on the product packaging or the SatelliteSale official webnettstedet.

When contacting support, please have your product model number (DSWM30) and proof of purchase readily available.