Philips Lighting 5058131PN

Philips myLiving PONGEE LED-spotlampe (modell 5058131PN) brukerhåndbok

1. Introduksjon

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Philips myLiving PONGEE white LED Spot Light, angled view

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Sikkerhetsinformasjon

Følg alltid følgende sikkerhetsregler for å forhindre skade eller materielle skader:

  • Elektrisk sikkerhet: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
  • Kun innendørs bruk: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
  • Pæretype: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage angitt på armaturet.
  • Håndtering: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
  • Rengjøring: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Pakkens innhold

Kontroller at alle komponenter er til stede før installasjonen starter:

  • Philips myLiving PONGEE LED Spot Light fixture (1 unit)
  • Monteringsutstyr (skruer, veggplugger)
  • Bruksanvisning

Note: A GU10 LED bulb is ikke inkludert og må kjøpes separat.

Packaging box for Philips myLiving PONGEE LED Spot Light

Figur 2: Produktemballasje

4. Oppsett og installasjon

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Dimensional drawing of Philips myLiving PONGEE LED Spot Light showing measurements in millimeters

Figure 3: Product Dimensions (all measurements in mm)

  1. Klargjør installasjonsområdet: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
  2. Koble fra strømmen: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
  3. Monter basen: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
  4. Koble til armaturet: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
  5. Installer pæren: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
  6. Fest armaturhuset: Secure the main body of the spot light to the mounted base.
  7. Gjenopprett kraften: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Bruksanvisning

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

  • Slå på/av: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
  • Justering av lysretning: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Vedlikehold

  • Rengjøring: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
  • Bytte av pære:
    1. Slå av strømforsyningen ved strømbryteren.
    2. La pæren avkjøles helt.
    3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
    4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
    5. Gjenopprett strømmen.

7. Feilsøking

ProblemMulig årsakLøsning
Lyset tennes ikke.
  • Ingen strømforsyning.
  • Pæren er defekt eller ikke riktig installert.
  • Løs ledningsforbindelse.
  • Sjekk strømbryteren eller sikringen.
  • Ensure the wall switch is ON.
  • Replace the bulb with a new GU10 LED bulb.
  • Kontakt en kvalifisert elektriker for å kontrollere ledningstilkoblingene.
Lette flimmer.
  • Løs pæretilkobling.
  • Inkompatibel dimmerbryter (hvis aktuelt).
  • Defekt pære.
  • Ensure the bulb is securely twisted into the socket.
  • If using a dimmer, ensure it is compatible with LED bulbs.
  • Bytt pære.

8. Spesifikasjoner

  • Merke: Philips belysning
  • Modellnummer: 5058131PN
  • Produktdimensjoner (L x B x H): 10 x 13.8 x 8.2 cm
  • Varevekt: 345 gram
  • Materiale: Metall
  • Farge: Hvit
  • Stil: Moderne
  • Lyskildetype: LED
  • Bulb Socket Type: GU10
  • Antall pærer: 1 (bulb not included)
  • Inngang Voltage: 220-240 volt
  • Strømkilde: Electrical cable (wired)
  • Installasjonstype: Surface Mount (Ceiling/Wall)
  • IP-vurdering: IP20 (kun innendørs bruk)
  • Spesielle funksjoner: Energy-efficient, Swivel head
  • Spesifikke bruksområder: Home, Bedroom, Living Room

9. Garanti og støtte

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting webnettstedet. Du kan også kontakte forhandleren din for å få hjelp.

Ta vare på kjøpsbeviset for eventuelle garantikrav.