amazon basics 12V 150 PSI Digital Tyre Inflator User Manual

Introduksjon

Thank you for choosing the amazon basics Compact Portable 12V 150 PSI Digital Tyre Inflator. This manual provides essential information for the safe and efficient operation of your new device. Please read it thoroughly before use and retain it for future reference.

This compact and portable tyre inflator is designed for convenient inflation of vehicle tyres (cars, motorcycles, scooters) and other inflatable items. It features a digital gauge for precise pressure settings, an auto-shutoff function, and a built-in LED light for visibility in low-light conditions.

Sikkerhetsinformasjon

Følg alltid følgende sikkerhetsretningslinjer for å forhindre skade eller materielle skader:

• Fare for sprengning: Do not adjust the regulator to result in an output pressure greater than the marked maximum pressure of the attachment.
• Risiko for skade: Do not direct the air stream at your body or other individuals.
• Miljøeksponering: Do not expose the device to rain. Store indoors in a dry place.
• Sørg for at bilmotoren går når du bruker pumpeaggregatet for å unngå å tømme bilbatteriet.
• Do not operate the inflator for more than 10 minutes continuously. Allow a 10-minute cool-down period after each operation.

Pakkeinnhold

Ved utpakking, sørg for at alle følgende gjenstander er til stede:

• 1 x amazon basics Digital Tyre Inflator (Model AC010225C)
• 1 x brukerhåndbok
• 1 x bæreveske
• 1 x 12V Cigarette Lighter Power Cord (integrated)
• 1 x Air Hose (integrated)
• 2 x Inflation Attachments (for balls, balloons, etc.)
• 1 x reservesikring
• 2 x Warning Cards

Image: The amazon basics Digital Tyre Inflator neatly stored within its carrying case.

Produktfunksjoner

• Compact 12-volt portable tyre inflator.
• Plugs into a standard 12V cigarette lighter port.
• Maximum pressure rating of 150 PSI.
• Airflow capacity: 22 L/M (liters per minute) at 0 PSI.
• 10-foot power cord for extended reach.
• 23.6-inch air hose for easy connection to tyres.
• Digital gauge with auto-shutoff capability for precise inflation.
• Built-in LED light for illumination in dark environments.

Bilde: Et nærbilde view of the digital display, 'SET' button, arrow buttons, and 'OFF/COMPRESSOR ON' and 'FLASH OFF/LIGHT' buttons.

Oppsett

1. Pakk ut inflatoren: Remove the tyre inflator and its accessories from the carrying case.
2. Locate Power Cord and Air Hose: The power cord and air hose are stored within compartments on the device. Gently pull them out.
3. Koble til strøm: Insert the 12V cigarette lighter plug into your vehicle's 12V accessory socket. Ensure the vehicle's engine is running to provide adequate power and prevent battery drain.
4. Attach Air Hose to Tyre: Screw the air hose connector onto the tyre valve stem until it is securely fastened. For other inflatables, use the appropriate inflation attachment.

Image: The rear of the inflator, illustrating the integrated storage for the air hose and the 12V power cord.

Bruksanvisning

1. Strøm på: Once connected to the 12V power source, the digital display will illuminate, showing the current tyre pressure.
2. Still inn ønsket trykk: Press the 'SET' button to cycle through pressure units (PSI, BAR, KPA). Use the '+' and '-' buttons to adjust the target pressure.
3. Start inflasjon: Press the 'COMPRESSOR ON' button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
4. Overvåk inflasjon: Keep an eye on the digital display during inflation.
5. Bruke LED-lyset: Press the 'LIGHT' button to turn on the built-in LED flashlight for use in dark conditions. Press again to turn off.
6. Frakople: Once inflation is complete and the compressor has stopped, press 'COMPRESSOR OFF', then carefully unscrew the air hose connector from the tyre valve.
7. Lagring: Coil the air hose and power cord back into their designated storage compartments. Store the inflator in its carrying case.

Image: The digital tyre inflator connected to a car tire, actively inflating it.

Viktige driftsmerknader:

• The maximum continuous run time for the inflator is 10 minutes. After 10 minutes of operation, allow the device to cool down for at least 10 minutes before resuming use. This prevents overheating and extends product life.
• For optimal performance and safety, always refer to your vehicle's owner's manual for recommended tyre pressure.

Vedlikehold

• Rengjøring: Tørk av utsiden av pumpeenheten med en myk, tørr klutamp klut. Ikke bruk skurende rengjøringsmidler eller senk enheten i vann.
• Lagring: Store the inflator in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Bytte sikring: The 12V cigarette lighter plug contains a replaceable fuse. If the inflator stops working, check and replace the fuse if necessary. A spare fuse is included in the package.

Feilsøking

• Pumpen slår seg ikke på:
  • Ensure the 12V cigarette lighter plug is fully inserted into the vehicle's socket.
  • Check the vehicle's 12V accessory socket for power.
  • Inspect the fuse in the 12V plug and replace if blown.
• Inflator går, men blåses ikke opp:
  • Ensure the air hose is securely screwed onto the tyre valve stem.
  • Check for any leaks in the air hose or connections.
• Inflator overheats and shuts off:
  • This is a safety feature. Allow the device to cool down for 10 minutes before resuming operation. Avoid continuous operation beyond 10 minutes.

Spesifikasjoner

Image: Visual representation of the inflator's dimensions: 18.59 cm length, 17.81 cm width, and 7.37 cm height.

Produkt overview Video

Watch this video for an unboxing and overview of the amazon basics Digital Tyre Inflator, demonstrating its components and initial handling.

Garanti og støtte

For customer service and warranty-related inquiries, please refer to the contact information provided with your purchase documentation or visit the official amazon basics support page.

Vennligst ta vare på kjøpsbeviset for eventuelle garantikrav.