Intelbras IWR 3000N Wireless-N 300 Mbps Router User Manual

1. Introduksjon

This manual provides detailed instructions for the installation, configuration, and operation of your Intelbras IWR 3000N Wireless-N 300 Mbps Router. Please read this manual carefully before using the device to ensure proper functionality and safety. The IWR 3000N router is designed to provide reliable Wi-Fi connectivity for your home or small office network, offering speeds up to 300 Mbps and various features to manage your internet access.

2. Sikkerhetsinformasjon

• Sørg for at ruteren er plassert i et godt ventilert område for å forhindre overoppheting.
• Ikke utsett enheten for vann, fuktighet eller ekstreme temperaturer.
• Use only the power adapter supplied with the router. Using an incorrect adapter may damage the device and void the warranty.
• Hold enheten unna sterke elektromagnetiske felt.
• Do not attempt to open or repair the router yourself. Contact qualified personnel for service.
• Oppbevares utilgjengelig for barn.

3. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• Intelbras IWR 3000N Wireless-N 300 Mbps Router
• Strømadapter
• Ethernet-kabel
• Hurtiginstallasjonsveiledning

4. Produktet er overview

4.1 Frontpanel

The front panel of the router features LED indicators that provide information about the device's status.

Figur 1: Foran view of the Intelbras IWR 3000N router, showing the Intelbras logo and status LEDs for power, WAN, LAN, and Wi-Fi activity.

• Strøm LED: Indikerer om ruteren er slått på.
• WAN LED: Indicates connection status to the internet (Wide Area Network).
• LAN-LED-er (1–4): Indikerer aktivitet på de kablede LAN-portene.
• WLAN LED: Indikerer aktivitet på trådløst nettverk.

4.2 Bakpanel

The rear panel contains all the physical connection ports and buttons.

Figur 2: Bak view of the Intelbras IWR 3000N router, displaying the power input, WPS/Reset button, WAN port (blue), and four LAN ports (yellow).

• Strøminngang: Koble til den medfølgende strømadapteren her.
• WPS/Reset-knapp: Press briefly for WPS function. Press and hold for 5-10 seconds to factory reset the router.
• WAN-port (blå): Connect your modem or internet service provider's cable here.
• LAN-porter (gul, 1–4): Koble til kablede enheter som datamaskiner, spillkonsoller eller smart-TV-er.
• antenner: Two external 5 dBi antennas for wireless signal transmission and reception.

5. Oppsett

5.1 Fysisk tilkobling

1. Plasser ruteren: Place the router in a central location in your home or office, away from obstructions and sources of interference (e.g., microwaves, cordless phones).
2. Koble til modemet: Connect one end of an Ethernet cable to the WAN port (blue) on the router and the other end to the LAN port on your modem.
3. Koble til strøm: Connect the power adapter to the router's power input and then plug it into an electrical outlet. The Power LED should illuminate.
4. Koble til kablede enheter (valgfritt): If you have wired devices, connect them to the yellow LAN ports (1-4) on the router using Ethernet cables.
5. Vent på initialisering: Allow a few minutes for the router to power on and initialize. The WAN LED should eventually turn solid, indicating an internet connection.

5.2 Initial Configuration (Router Mode)

To configure the router, you can use a computer connected via Wi-Fi or Ethernet.

1. Koble til ruteren:
   • Wired: Connect your computer to one of the yellow LAN ports (1-4) on the router using an Ethernet cable.
   • Trådløs: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named "Intelbras_IWR3000N" (or similar, check the label on the bottom of the router). The default password is also on the label.
2. Få tilgang til Web Grensesnitt: Åpne a web browser (e.g., Chrome, Firefox, Edge) and type the default IP address 10.0.0.1 or 192.168.1.1 (check the router label for the exact address) into the address bar, then press Enter.
3. Logg inn: Enter the default username and password. Typically, both are admin. Refer to the router's label if these credentials do not work.
4. Kjør hurtigoppsettveiviseren: Upon successful login, the router's quick setup wizard should appear. Follow the on-screen instructions to configure your internet connection (e.g., PPPoE, Dynamic IP, Static IP) and set up your Wi-Fi network name (SSID) and password.
5. Lagre innstillinger: Etter at du har fullført veiviseren, lagrer du innstillingene. Ruteren kan starte på nytt.
6. Koble til på nytt: If you changed the Wi-Fi network name or password, reconnect your wireless devices to the new network.

6. Driftsmåter

The Intelbras IWR 3000N supports multiple operating modes to suit different network requirements.

6.1 Rutermodus

This is the default mode, where the device acts as the primary gateway for your network, connecting to the internet via the WAN port and distributing internet access to wired and wireless devices.

6.2 Trådløs Repeater-modus

In repeater mode, the IWR 3000N extends the coverage of an existing Wi-Fi network. It connects wirelessly to another router's Wi-Fi signal and re-broadcasts it, effectively expanding the wireless range.

1. Adgang Web Grensesnitt: Logg inn på ruterens web interface as described in Section 5.2.
2. Navigate to Operating Mode: Find the "Operating Mode" or "Wireless Mode" section in the settings.
3. Velg repeatermodus: Choose "Wireless Repeater" or "WISP" mode.
4. Skann etter nettverk: The router will scan for available Wi-Fi networks. Select the network you wish to extend.
5. Skriv inn passord: Provide the Wi-Fi password for the selected network.
6. Lagre og start på nytt: Save the settings. The router will restart and operate as a repeater.

7. Avanserte funksjoner

7.1 IPv6-støtte

The IWR 3000N is compatible with IPv6, the latest version of the Internet Protocol. This ensures future-proof connectivity and compatibility with modern internet services. Configuration options for IPv6 can typically be found under the "Network" or "WAN" settings in the web grensesnitt.

7.2 Site Blocking

This feature allows you to restrict access to specific websites or types of content. It is useful for parental control or managing network usage in a small office.

1. Adgang Web Grensesnitt: Logg inn på ruterens web grensesnitt.
2. Navigate to Security/Parental Control: Look for sections like "Security," "Parental Control," or "Access Control."
3. Configure Site Blocking: Legg til URLs or keywords of the websites you wish to block. You may also be able to set schedules for when these blocks are active.
4. Lagre innstillinger: Bruk endringene.

7.3 Bandwidth Control (QoS)

Bandwidth Control (Quality of Service - QoS) allows you to prioritize internet traffic for certain applications or devices, ensuring smoother performance for critical tasks like online gaming or video conferencing.

1. Adgang Web Grensesnitt: Logg inn på ruterens web grensesnitt.
2. Navigate to QoS/Bandwidth Control: Find the "QoS" or "Bandwidth Control" section.
3. Configure Rules: Set rules based on IP address, MAC address, or application type to allocate bandwidth or prioritize traffic.
4. Lagre innstillinger: Bruk endringene.

8. Vedlikehold

8.1 Fastvareoppdatering

Regularly updating the router's firmware ensures optimal performance, security, and access to new features. Visit the official Intelbras website for the latest firmware for your IWR 3000N model.

1. Last ned fastvare: Last ned riktig firmware file from the Intelbras support webnettstedet til datamaskinen din.
2. Adgang Web Grensesnitt: Logg inn på ruterens web grensesnitt.
3. Navigate to Firmware Upgrade: Find the "System Tools," "Firmware Upgrade," or "Maintenance" section.
4. Last opp fastvare: Bla til den nedlastede fastvaren file and initiate the upgrade process. Do not power off the router during the update.
5. Start på nytt: The router will restart automatically after the update is complete.

8.2 Fabrikkinnstilling

A factory reset restores the router to its original default settings. This can be useful for troubleshooting persistent issues or when reconfiguring the device from scratch.

• Metode 1 (maskinvareknapp): With the router powered on, press and hold the WPS/Reset button on the rear panel for approximately 5-10 seconds until the LEDs flash. Release the button, and the router will restart with factory defaults.
• Metode 2 (Web Grensesnitt): Logg inn på ruterens web interface. Navigate to "System Tools" or "Maintenance" and find the "Factory Defaults" or "Restore" option. Confirm the action.

9. Feilsøking

10. Spesifikasjoner

11. Garanti og støtte

For warranty information, technical support, or further assistance, please refer to the warranty card included with your product or visit the official Intelbras website. You can also contact Intelbras customer service directly for specific inquiries related to your IWR 3000N router.

Intelbras Official Webnettsted: www.intelbras.com.br