Adler AD 1186 LED-klokke med termometer brukerhåndbok

Introduksjon

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Adler AD 1186 LED Clock with Thermometer. Please read this manual thoroughly before using the device to ensure proper function and longevity.

Sikkerhetsinstruksjoner

• Sørg for at enheten er plassert på en stabil, flat overflate.
• Ikke utsett enheten for ekstreme temperaturer, direkte sollys eller høy luftfuktighet.
• Hold enheten unna vann eller andre væsker.
• Bruk kun den spesifiserte strømadapteren.
• Ikke forsøk å demontere eller reparere enheten selv. Kontakt kvalifisert servicepersonell for å få hjelp.
• Oppbevares utilgjengelig for barn.

Pakkeinnhold

Vennligst sjekk pakken for følgende varer:

• Adler AD 1186 LED Clock with Thermometer
• Strømadapter
• Brukerhåndbok (dette dokumentet)

Produkt overview

Familiarize yourself with the components of your Adler AD 1186 LED Clock.

Figur 1: Foran View. This image shows the front of the Adler AD 1186 LED Clock. The large LED display clearly shows the time (e.g., 20:18), humidity percentage (e.g., 30% RH), and temperature in Celsius (e.g., 21°C). The Adler logo is visible below the time display.

Figure 2: Top Panel Controls. This image provides a top-down angled view of the clock, highlighting the control buttons. From left to right, buttons include "SETTING", "TIME", "DATE", "ALARM", "SNOOZE" (large central button), "UP", "DOWN", and "DATE". These buttons are used for configuring the clock's various functions.

Figur 3: Bakpanel. This image displays the back of the Adler AD 1186 LED Clock. It shows the power input port for the adapter and a compartment for battery backup, ensuring timekeeping during power outages.

Nøkkelkomponenter:

• LED display: Shows time, temperature, and humidity.
• Kontrollknapper: Located on the top panel for setting time, date, alarm, and adjusting settings.
• Strøminngang: For tilkobling av strømadapteren.
• Batterirom: For backup batteries (type not specified, typically AAA or button cell).

Oppsett

1. Pakke ut: Ta klokken og alt tilbehør forsiktig ut av emballasjen.
2. Strømtilkobling: Connect the provided power adapter to the DC input port on the back of the clock (refer to Figure 3). Plug the adapter into a standard electrical outlet. The LED display should illuminate.
3. Batteribackup (valgfritt, men anbefalt): Open the battery compartment on the rear of the clock. Insert the required backup batteries (e.g., 2x AAA, not included) according to the polarity markings. This will maintain time settings during power interruptions.

Bruksanvisning

1. Stille inn tid og dato

1. Trykk på TID button (refer to Figure 2). The hour digits will start flashing.
2. Bruk UP og NED knapper for å justere timen.
3. Pressen TID igjen for å bekrefte timen og gå videre til minuttjustering. Minuttsifrene vil blinke.
4. Bruk UP og NED knapper for å justere minuttene.
5. Pressen TID igjen for å bekrefte minuttene.
6. To set the date, press the DATO button. The year will flash.
7. Bruk UP og NED to set the year, then press DATO to move to month, and then day.
8. Pressen DATO again to exit date setting mode.

2. Stille inn alarmen

1. Trykk på ALARM button (refer to Figure 2). The alarm hour digits will flash.
2. Bruk UP og NED knappene for å stille inn ønsket alarmtime.
3. Pressen ALARM again to confirm the hour and move to minute adjustment. The alarm minute digits will flash.
4. Bruk UP og NED knappene for å stille inn ønskede alarmminutter.
5. Pressen ALARM again to activate the alarm. An alarm icon will appear on the display.
6. For å deaktivere alarmen, trykk på ALARM knappen til alarmikonet forsvinner.

3. Snooze-funksjon

Når alarmen går, trykker du på den store SLUM button (refer to Figure 2) to temporarily silence the alarm. The alarm will sound again after a few minutes (default snooze time is typically 5-9 minutes, refer to specific product details if available).

4. Lysstyrkejustering

The clock features 2 brightness levels. Press the INNSTILLING button (or a dedicated brightness button if present, otherwise cycle through settings) to cycle between the brightness levels. Adjust to your preferred visibility.

5. Temperatur- og fuktighetsvisning

The clock automatically displays the current room temperature and humidity. No special setting is required for this function. The temperature is displayed in Celsius (°C) and humidity as a percentage (% RH).

Vedlikehold

• Rengjøring: Bruk en myk, tørr klut til å rengjøre klokkens overflate. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• Støv: Regularly dust the device to prevent accumulation, especially around vents if any.
• Batteribytte: If using battery backup, replace batteries annually or when the display shows signs of dimming during power outages.

Feilsøking

Spesifikasjoner

Garanti og støtte

Adler products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your purchase or visit the official Adler website. For technical support or service inquiries, please contact Adler customer service through their official channels.

Ta vare på kjøpsbeviset for garantikrav.