AUTOOL BT360 12V batterilastetester bruksanvisning

1. Introduksjon

The AUTOOL BT360 is a 12V battery load tester designed to analyze the health status of automotive batteries. It performs battery tests, cranking tests, and charging system tests, providing accurate results for various battery types including regular flooded, AGM flat plate, AGM spiral, and Gel batteries. This manual provides detailed instructions for the proper use and maintenance of your BT360 tester.

2. Sikkerhetsinformasjon

Always observe the following safety precautions when using the AUTOOL BT360 battery tester:

• Bruk passende øyevern og verneklær når du arbeider i nærheten av batterier.
• Sørg for at kjøretøyet er i et godt ventilert område.
• Avoid sparks, flames, and smoking near the battery, as batteries can produce explosive gases.
• Do not touch hot engine parts or moving components.
• Keep the tester and cables away from water, oil, and grease.
• Sørg for at batteriet clamps are securely connected to the correct terminals (red to positive, black to negative).
• Hvis batterisyre kommer i kontakt med hud eller øyne, skyll straks med rikelig vann og oppsøk lege.

3. Produktet er overview

3.1 Komponenter

The AUTOOL BT360 package typically includes:

• AUTOOL BT360 Main Unit
• Integrated Testing Cables with Alligator Clamps (Rød for positiv, svart for negativ)
• Brukerhåndbok (dette dokumentet)

Image 3.1: AUTOOL BT360 Battery Tester and its included accessories.

3.2 Tester Unit

Bilde 3.2: Foran view of the AUTOOL BT360 Battery Tester, showing the display and control buttons.

The main unit features an LCD display and four control buttons:

• ESC: Escape/Back button.
• ØNH: Enter/Confirm button.
• Pil opp/ned: Navigasjonsknapper for menyvalg.

3.3 Nøkkelfunksjoner

• Performs Battery Test, Cranking Test, and Charging Test.
• Supports multiple battery types: Regular Flooded, AGM Flat Plate, AGM Spiral, and Gel.
• Wide CCA testing range: 100-2400 CCA.
• Multi-language support for user interface.

Image 3.3: The AUTOOL BT360 supports multiple languages for its user interface.

4. Spesifikasjoner

Image 4.1: Physical dimensions of the AUTOOL BT360 Battery Tester.

4.1 Supported Starting Power Supply Standards

Image 4.2: Table showing various starting power supply standards supported by the BT360.

5. Oppsett

5.1 Utpakking

Carefully remove the AUTOOL BT360 tester and all accessories from the packaging. Inspect for any signs of damage. If any components are missing or damaged, contact customer support.

5.2 Connecting the Tester

The BT360 is powered directly by the vehicle's 12V battery. Follow these steps to connect the tester:

1. Sørg for at tenningen på kjøretøyet er av og at alt tilbehør er slått av.
2. Koble til rød positiv (+) clamp to the positive (+) terminal of the 12V battery.
3. Koble til svart negativ (-) clamp til den negative (-) polen på 12V-batteriet.
4. Once connected, the tester will power on automatically.

Image 5.1: The AUTOOL BT360 tester with its integrated testing cables and clamps.

Image 5.2: The BT360 tester connected to a vehicle battery for testing.

6. Bruksanvisning

After connecting the tester, the main menu will appear. Use the Up/Down arrow buttons to navigate through options and the ENT button to confirm selections. Use the ESC button to go back to the previous screen.

Image 6.1: Various display screens of the AUTOOL BT360, illustrating menu navigation and test result displays.

6.1 Batteritest

This function evaluates the overall health of the battery.

1. Velg fra hovedmenyen Batteritest and press ENT.
2. Velge Batteriplassering: Choose 'In-Vehicle' if the battery is installed in the car, or 'Out-of-Vehicle' if it's removed. Press ENT.
3. Velge Batteritype: Choose the type that matches your battery (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, Gel). Press ENT.
4. Velge Teststandard: Choose the standard specified on your battery (e.g., CCA, JIS, DIN). Press ENT.
5. Sett Batterivurdering: Input the CCA value (or equivalent rating) as indicated on your battery label. Use arrow buttons to adjust the value and ENT to confirm.
6. The tester will perform the analysis and display results such as State of Health (SOH), State of Charge (SOC), voltage, internal resistance, and a recommendation (e.g., 'Good Battery', 'Charge', 'Replace').

6.2 Starttest

This test analyzes the vehicle's starting system, including the starter motor.

1. Velg fra hovedmenyen Svingtest and press ENT.
2. Follow the on-screen prompts to start the vehicle. The tester will monitor the battery voltage under sveiving.
3. Once the test is complete, the display will show cranking voltage, cranking time, and a diagnosis of the starting system's performance.

6.3 Ladetest

This test evaluates the vehicle's charging system, including the alternator and regulator.

1. Velg fra hovedmenyen Ladetest and press ENT.
2. Follow the on-screen prompts to rev the engine to a specified RPM (e.g., 2500 RPM for 5 seconds).
3. The tester will measure the charging voltage under load and no-load conditions.
4. The results will indicate the charging system's output, ripple voltage, and overall health (e.g., 'Good', 'Low Output', 'High Output').

7. Vedlikehold

To ensure the longevity and accuracy of your AUTOOL BT360 tester:

• Clean the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Hold batteriet rentamper ren og fri for korrosjon.
• Oppbevar testeren på et tørt, kjølig sted, unna direkte sollys og ekstreme temperaturer.
• Unngå å miste enheten eller utsette den for sterke støt.

8. Feilsøking

If you encounter issues with your AUTOOL BT360, refer to the following common problems and solutions:

9. Garanti og støtte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUTOOL webnettstedet. Ta vare på kjøpskvitteringen som kjøpsbevis for garantikrav.

Produsent: AUTOOL

Dato først tilgjengelig: 27. oktober 2017