Bonacell NP-FW50 Battery and LCD Dual Charger

Bonacell NP-FW50 Battery and LCD Dual Charger Instruction Manual

For Sony Alpha and DSC-RX10 Series Digital Cameras

Introduksjon

Thank you for choosing the Bonacell NP-FW50 Battery and LCD Dual Charger. This product is designed to provide reliable power for your compatible Sony digital cameras. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new battery and charger system.

The Bonacell NP-FW50 batteries are 1500mAh Li-ion batteries with a voltage of 7.2V, offering a dependable power source for extended shooting times. The dual charger features an LCD display for clear charging status and multiple protection mechanisms to ensure safe and efficient charging.

Bonacell NP-FW50 Battery and Charger Compatibility List

Image: Product Compatibility. This image displays the wide compatibility of the Bonacell NP-FW50 battery and charger with various Sony Alpha and DSC-RX10 series cameras, including A7RM2, A6500, A5100, and DSC-RX10 IV models.

Oppsett

Pakkeinnhold

Before proceeding, please ensure all components are present:

  • 1 x Bonacell LCD Dual Charger
  • 2 x Bonacell NP-FW50 Li-ion Batteries
  • 1 x USB-ladekabel
Bonacell NP-FW50 Charger and Batteries

Bilde: Pakkens innhold. This image shows the Bonacell LCD Dual Charger, two NP-FW50 batteries, and a USB charging cable, as typically included in the product package.

Innledende lading

For optimal performance, it is recommended to fully charge the batteries before first use.

  1. Insert the NP-FW50 batteries into the charging slots of the dual charger. Ensure they are correctly oriented.
  2. Connect the USB charging cable to the charger's input port.
  3. Connect the other end of the USB cable to a compatible power source.
Charging Bonacell NP-FW50 Batteries from Multiple Devices

Image: Charging from Multiple Devices. This image illustrates the versatility of the Bonacell charger, showing it can be powered by a laptop, phone charger, power bank, or computer via its USB cable.

Bruksanvisning

Ladeprosess

The Bonacell LCD Dual Charger allows you to charge one or two NP-FW50 batteries simultaneously.

  1. Sett inn batterier: Gently slide the NP-FW50 batteries into the designated slots on the charger. The charger is designed for a snug fit.
  2. Koble til strøm: Use the provided USB cable to connect the charger to a 5V/2A USB power source (e.g., wall adapter, power bank, computer USB port).
  3. Skjermlading: The LCD display on the charger will illuminate, showing the charging status for each battery independently. The battery icon will animate to indicate charging progress.
  4. Indikasjon for full lading: Once a battery is fully charged, its corresponding icon on the LCD will show a full battery symbol and stop animating.
  5. Ta ut batterier: Disconnect the charger from the power source, then carefully remove the charged batteries.
Bonacell LCD Dual Charger with Protection Features

Image: Visible and Intelligent Charger. This image highlights the LCD display of the Bonacell dual charger, showing individual battery charge status and indicating built-in protections such as overcharge, power visualization, overheat, short circuit, and high voltage beskyttelse.

Bonacell NP-FW50 Battery in Charger with Features

Image: Safe and Reliable Charging. This image shows a Bonacell NP-FW50 battery inserted into the charger, emphasizing features like longer shooting time, 7.2V 1500mAh energy capacity, and a battery meter for monitoring charge.

Vedlikehold og sikkerhet

Batteripleie

  • Lagring: Oppbevar batteriene på et kjølig, tørt sted vekk fra direkte sollys og ekstreme temperaturer.
  • Rengjøring: Keep battery contacts clean using a dry cloth.
  • Ingen minneeffekt: Bonacell NP-FW50 batteries have no memory effect, allowing you to charge them at any time without fully discharging them first.

Charger Care

  • Miljø: Use the charger in a dry location only. Avoid exposure to moisture or high humidity.
  • Rengjøring: Wipe the charger with a soft, dry cloth. Do not use liquid cleaners.

Sikkerhetsadvarsler

Failure to follow these safety guidelines may result in fire, electric shock, or injury.

  • Ikke demonter: Do not attempt to disassemble the battery or charger. There are no user-serviceable parts inside. Refer service to qualified service agent.
  • Do Not Dispose in Fire: Batterier kan eksplodere hvis de kastes i brann.
  • Temperatur: Do not store batteries or charger in temperatures over 60°C (140°F).
  • Fuktighet: To prevent fire or moisture, do not expose the charger to rain or excessive humidity.
  • Sjokkfare: To reduce the risk of electronic shock, do not remove the cover or back plate of the charger.
Bonacell Super Cycle Battery and Protection Features

Image: Battery Cycle Life and Protections. This image illustrates the superior cycle life of Bonacell batteries compared to others, and highlights various protection features including over-discharge, over-charge, over-voltage, kortslutnings- og overstrømsvern.

Feilsøking

If you encounter issues with your Bonacell NP-FW50 Battery and LCD Dual Charger, please refer to the following common problems and solutions:

  • Batteriene lader ikke:
    • Ensure batteries are inserted correctly into the charger slots.
    • Verify the USB cable is securely connected to both the charger and the power source.
    • Try a different USB power source (e.g., another wall adapter, a different USB port on your computer) to rule out a faulty power source.
    • Check if the power source provides sufficient current (recommended 5V/2A).
  • Charger LCD not displaying:
    • Ensure the charger is connected to a working power source.
    • Sjekk USB-kabelen for skader, og prøv en annen kabel om nødvendig.
  • Battery swelling or overheating:
    • Immediately discontinue use of the battery and charger.
    • Contact customer support for assistance. Do not attempt to use or charge a swollen battery.

Spesifikasjoner

TrekkSpesifikasjon
BatteritypeLi-ion
Batterikapasitet1500mAh
Batteri voltage7.2V
LaderinngangDC 5V / 2A
LaderutgangDC 8.4V / 0.6A (5W)
Lader dimensjoner85 x 54 x 18 mm (ca. 3.35 x 2.13 x 0.71 tommer)
Produktvekt6.4 unser (ca. 181 g)
Inkludert batterier2 Lithium Ion batterier
Bonacell LCD Camera Battery Charger Specifications

Image: Charger Specifications. Dette bildet gir en detaljert view of the Bonacell LCD camera battery charger, including its input/output specifications and a table listing applicable battery type (NP-FW50), input (DC 5V/2A), output (DC 8.4V/0.6A), and dimensions (85*54*18 MM).

Garanti og støtte

Garantiinformasjon

Bonacell products are manufactured to high-quality standards. For specific warranty details regarding your NP-FW50 Battery and LCD Dual Charger, please refer to the warranty card included with your purchase or contact Bonacell customer support.

Kundestøtte

If you have any questions, concerns, or require technical assistance, please contact Bonacell customer support through the retailer where you purchased the product or visit the official Bonacell store for contact information.

You can find more information about Bonacell products at the Bonacell Store on Amazon.