Revell USS Forrestal (CVA-59) 1:542 Scale Plastic Model Kit Instruction Manual

1. Produktet er overview

This manual provides detailed instructions for assembling the Revell USS Forrestal (CVA-59) 1:542 Scale Plastic Model Kit. The kit allows for the construction of a detailed replica of the iconic aircraft carrier, the USS Forrestal (CVA-59).

Image 1.1: A fully assembled Revell USS Forrestal (CVA-59) model kit, showcasing the aircraft carrier with various aircraft on its deck and a display stand.

The USS Forrestal (CVA-59) was the lead ship of her class of supercarriers and the first supercarrier ever built. This model kit is designed for enthusiasts aged 10 and above, offering a rewarding building experience.

2. Sikkerhetsinformasjon

Please read all safety warnings before beginning assembly. This kit contains small parts and may pose a choking hazard for young children. Adult supervision is recommended for younger builders.

• Små deler: Keep all small parts out of reach of children under 3 years of age.
• Skarpe kanter: Exercise caution when cutting or trimming plastic parts, as some edges may be sharp.
• Lim og maling: Use model adhesives and paints in a well-ventilated area. Avoid inhaling fumes. Follow the safety instructions provided with your chosen adhesives and paints.
• Verktøy: Use appropriate modeling tools safely. Keep cutting tools away from fingers and other body parts.

3. Pakkens innhold

The Revell USS Forrestal (CVA-59) model kit includes the following components:

• Plastic model parts (203 pieces)
• Dekalark
• Monteringsanvisning
• Display stand components

Note: Adhesives and paints are sold separately unless explicitly stated on the packaging.

Bilde 3.1: Detaljert view of the model's flight deck, showing various aircraft and deck markings. This illustrates the level of detail in the plastic parts.

4. Monteringsinstruksjoner

Follow these steps carefully for successful assembly of your model kit. Refer to the included instruction booklet for detailed diagrams and part numbers.

4.1. Forberedelse

1. Pakk ut komponenter: Carefully remove all plastic parts from their sprues. Inspect for any damage or missing pieces.
2. Rengjør deler: Wash plastic parts in mild soapy water to remove any mold release agents, then rinse and air dry.
3. Samle verktøy: Ensure you have essential modeling tools such as a hobby knife, plastic cement, tweezers, sandpaper, and paints.

4.2. Hull Assembly

Begin by assembling the main hull sections. Carefully align and glue the port and starboard hull halves together. Allow sufficient drying time for the adhesive.

Bilde 4.2.1: View of the model's underside, illustrating the propellers and rudder assembly. This section requires careful alignment during hull construction.

Attach the propeller shafts, propellers, and rudder components as indicated in the instruction diagrams. Ensure these are securely fastened.

4.3. Flight Deck and Superstructure

Proceed with attaching the flight deck sections to the hull. Pay close attention to alignment to ensure a flat and even surface. Next, assemble the island (superstructure) components.

Bilde 4.3.1: Detaljert view of the model's island, showing radar masts, antennas, and the number '59'. This is a complex sub-assembly.

Attach the various radar masts, antennas, and other small details to the island before securing it to the flight deck. Some parts, like the aircraft elevators, may be movable.

Image 4.3.2: Close-up of an aircraft elevator in a lowered position, demonstrating the detail and potential articulation of certain model features.

4.4. Aircraft and Details

Assemble the miniature aircraft included in the kit. These typically consist of a few parts each. Once assembled, they can be placed on the flight deck. Attach any remaining small details such as railings, life rafts, and deck equipment.

4.5. Maling og dekaler

After assembly, you may choose to paint your model. Refer to the color guide in the instruction booklet for recommended paint schemes. Once painted and dry, apply the decals according to the provided diagram. Use decal setting solution for best results.

5. Utstilling og stell

5.1. Displaying Your Model

The kit includes components for a display stand. Assemble the stand as per the instructions and place your finished USS Forrestal model securely on it. Choose a stable, level surface for display, away from direct sunlight and extreme temperatures.

Image 5.1.1: The completed model kit, USS Forrestal, presented on its included display stand, ready for exhibition.

5.2. Vedlikehold og rengjøring

To maintain the appearance of your model, periodically dust it gently with a soft brush or a can of compressed air. Avoid using harsh chemicals or abrasive cleaners, as these can damage the paint and plastic.

6. Vanlige problemer og løsninger

• Deler som ikke passer: If parts do not fit together smoothly, gently sand the mating surfaces with fine-grit sandpaper. Do not force parts, as this can cause breakage.
• Excess Glue: If excess glue appears, allow it to dry completely, then carefully trim or sand it away.
• Decal Bubbles: Use a sharp hobby knife to carefully puncture any air bubbles under decals, then gently press down to release the air. Apply more decal setting solution if needed.
• Malingsfeil: Minor paint errors can often be corrected by carefully touching up with the correct color or by gently sanding and repainting small areas.

7. Spesifikasjoner

8. Garanti og støtte

For questions regarding missing parts, manufacturing defects, or assembly assistance, please contact Revell customer support directly. Refer to the contact information provided on the product packaging or the official Revell webnettstedet for den nyeste støtteinformasjonen.

This product is a model kit and does not typically come with an operational warranty. Any issues related to the quality of the plastic parts or decals should be addressed with the manufacturer.