1. Introduksjon
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Produktfunksjoner
- Universal kompatibilitet: Controls a wide range of devices.
- Self-Learning Function: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Store knapper: Designed with oversized, clearly marked buttons for enhanced usability.
- Intuitiv design: Simple layout for straightforward operation.
- Hurtigprogrammering: Learning process typically takes less than one minute per button.
3. Oppsett
3.1. Installasjon av batteri
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Finn batteriromdekselet på baksiden av fjernkontrollen.
- Skyv dekselet nedover, eller trykk på låsen og løft for å åpne.
- Sett inn to AAA-batterier, og sørg for at de positive (+) og negative (-) polene er riktig justert med merkingene inni batterirommet.
- Sett på batteridekselet igjen, og skyv det tilbake på plass til det klikker ordentlig.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Gå inn i læringsmodus: Trykk og hold inne MAKT button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- Send signal: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Repeat for Other Buttons: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Avslutt læringsmodus: Once all desired buttons are programmed, press the MAKT button on the Simply remote again to exit learning mode. The indicator light will turn off.
Note: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Bilde: Foran view of the Simply SUPTLB001 remote control.
4. Bruksanvisning
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Enhetsvalg: Trykk på A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Slå på/av: Trykk på MAKT -knappen for å slå den valgte enheten av eller på.
- Volumkontroll: Bruk V+ knappen for å øke volumet og V- for å redusere volumet.
- Program/Channel Control: Bruk P+ button to go to the next program/channel and P- to go to the previous program/channel.
- AV-inngang: Trykk på AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Vedlikehold
- Rengjøring: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Batteribytte: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Lagring: Oppbevar fjernkontrollen på et tørt sted, unna direkte sollys og ekstreme temperaturer.
6. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Fjernkontrollen fungerer ikke. | Batteriene er døde eller satt inn feil. | Bytt batteriene med nye AAA-batterier, og sørg for at polariteten er riktig. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| Fjernkontrollens rekkevidde er dårlig. | Lave batterier eller hindring mellom fjernkontroll og enhet. | Skift batterier. Sørg for fri sikt mellom fjernkontrollen og enhetens IR-mottaker. |
7. Spesifikasjoner
| Merke | Overlegen elektronikk |
| Modellnavn | Ganske enkelt |
| Modellnummer | SUPTLB001 |
| Farge | Svart |
| Tilkoblingsteknologi | Infrared (IR) Learning Function |
| Kompatible enheter | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Antall knapper | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Batteritype | 2 x AAA (not rechargeable) |
| Maksimal rekkevidde | 10 meter (ca. 33 fot) |
| Dimensjoner (ca.) | 16.5 cm (Lengde) x 4.5 cm (Bredde) |
Bilde: Side view of the remote control with approximate dimensions.
8. Garanti og støtte
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 år fra kjøpsdatoen.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webnettstedet. Vennligst ta vare på kjøpsbeviset for garantivalidering.