Introduksjon
The Amazon Basics 4K HDMI 3 Port Switch allows you to connect up to three HDMI source devices to a single HDMI display, such as a TV or projector. This device is ideal for expanding the HDMI input capabilities of your display, enabling seamless switching between various entertainment or work devices. It supports 4K resolution at 30Hz and is HDCP compliant, ensuring compatibility with a wide range of modern equipment.
Sikkerhetsinformasjon
- Les alle instruksjonene nøye før bruk.
- Ikke utsett enheten for fuktighet, ekstreme temperaturer eller direkte sollys.
- Bruk kun den medfølgende USB-strømkabelen.
- Oppbevares utilgjengelig for barn.
- Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel if needed.
Pakkeinnhold
Bekreft at alle varene er til stede i pakken:
- Amazon Basics 4K HDMI 3 Port Switch
- USB-strømkabel (for valgfri strøm)
- Remote Control (CR2025 battery not included)
Image: The HDMI switch, its remote control, and the USB power cable included in the package.
Produkt overview
The HDMI switch features three input ports and one output port, along with a power input and an IR receiver for the remote control.
Bilde: En detaljert view of the HDMI switch, highlighting the three HDMI input ports (INPUT1, INPUT2, INPUT3), one HDMI output port (OUTPUT), and the DC 5V power input.
Frontpanel
- STRØM-LED: Indikerer strømstatus.
- LED1/LED2/LED3: Indicate which HDMI input is currently active.
- SELECTION Button: Manually switch between HDMI inputs.
- IR-mottaker: Mottar signaler fra fjernkontrollen.
Bakpanel
- HDMI INPUT 1/2/3: Connect your source devices (e.g., game console, Blu-ray player, computer).
- HDMI-UTGANG: Connect to your display device (e.g., TV, projector, monitor).
- DC 5V: Power input port (optional for some setups, required for 4K resolution or longer cables).
Oppsett
Follow these steps to connect your HDMI switch:
- Koble til kildeenheter: Plug your HDMI source devices (e.g., gaming console, media player, computer) into the HDMI INPUT 1, 2, and 3 ports on the switch using HDMI cables (sold separately).
- Koble til skjermenhet: Connect your TV, monitor, or projector to the HDMI OUTPUT port on the switch using an HDMI cable (sold separately).
- Connect Power (Optional/Recommended): Insert the small end of the included USB power cable into the DC 5V port on the switch. Plug the USB-A end into a USB power adapter (not included) or a USB port on your TV/computer. While the switch can draw power from HDMI sources, connecting the USB power cable is recommended for stable performance, especially with 4K resolutions or longer HDMI cables.
- Strøm på: Ensure all connected devices and the display are powered on. The switch will automatically detect the active input or you can select it manually.
Image: The HDMI switch connected to a laptop via an HDMI input, with the output connected to a display (not fully visible). This illustrates a typical setup.
Drift
The HDMI switch offers two methods for selecting inputs:
Automatisk veksling
The switch is designed to automatically detect and switch to a newly activated HDMI source. If multiple sources are active, it will typically prioritize the lowest numbered input (Input 1, then Input 2, etc.) or the last active input.
Manuell veksling
- Using the SELECTION Button: Press the 'SELECTION' button on the front panel of the switch to cycle through the available HDMI inputs (Input 1 → Input 2 → Input 3 → Input 1...). The corresponding LED will illuminate to indicate the active input.
- Bruk av fjernkontrollen: Point the remote control towards the IR receiver on the front of the switch. Press the desired input number button (1, 2, or 3) to switch directly to that input. Ensure a CR2025 battery is installed in the remote control.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| No picture/signal on display. |
|
|
| Picture flickers or drops out. |
|
|
| Fjernkontrollen virker ikke. |
|
|
| Automatic switching not working as expected. | Some devices maintain an active signal even when off, preventing auto-switching. | Use manual switching via the button on the switch or the remote control. |
Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Modellnummer | AZSW3T1A-4K2K |
| HDMI-versjon | HDMI 1.4 (Supports 4K@30Hz) |
| HDCP-samsvar | HDCP 1.4 |
| Inngangsporter | 3 x HDMI |
| Utgangsporter | 1 x HDMI |
| Støttede oppløsninger | Up to 4K (3840x2160) @ 30Hz, 1080p, 720p, etc. |
| Lydstøtte | Støtter ulike lydformater |
| Strømforsyning | DC 5V via USB (optional, USB cable included) |
| Kontrollmetoder | Manual button, IR remote control |
| Dimensjoner (L x B x H) | 4.49 x 0.79 x 2.8 tommer (11.4 x 2.0 x 7.1 cm) |
| Vekt | 6.9 unser (195.6 gram) |
Vedlikehold
- Rengjør enheten med en myk, tørr klut. Ikke bruk flytende rengjøringsmidler eller aerosoler.
- Hold enheten fri for støv og rusk for å sikre tilstrekkelig ventilasjon.
- Oppbevares på et kjølig, tørt sted når den ikke er i bruk i lengre perioder.
Garanti og støtte
For warranty information and customer support, please refer to the Amazon Basics official webnettstedet eller kontakt Amazons kundeservice direkte. Ta vare på kjøpskvitteringen for garantikrav.