1. Introduksjon
This instruction manual provides essential information for the safe and effective use of your new SHARP ES-S7C-WL Compact Drum Washing Machine. Please read this manual thoroughly before operating the appliance and retain it for future reference. This model features a compact design, heater sensor drying, four eco-sensors for optimized performance, quiet DD inverter operation, and Plasmacluster technology for enhanced hygiene.
Figur 1: Foran view of the SHARP ES-S7C-WL Compact Drum Washing Machine.
2. Sikkerhetsinformasjon
Følg alltid grunnleggende sikkerhetsregler når du bruker elektriske apparater for å redusere risikoen for brann, elektrisk støt eller personskade.
- Sørg for at apparatet er skikkelig jordet.
- Ikke bruk vaskemaskinen hvis den er skadet eller ikke fungerer som den skal.
- Keep children away from the appliance during operation. This model includes a child lock feature.
- Ikke vask eller tørk gjenstander som har blitt tilsmusset med brennbare stoffer.
- Trekk ut støpselet til apparatet fra stikkontakten før rengjøring eller vedlikehold.
3. Oppsett og installasjon
Proper installation is crucial for the performance and longevity of your washing machine. Refer to the following guidelines and diagrams.
3.1 Carry-in Confirmation Items
Before carrying the unit into your home, confirm that all entry points and passages are wide enough. A minimum clearance of 10cm more than the product's dimensions is required for smooth transport.
Figure 2: Carry-in clearance requirements for product dimensions, entrance, corridor, elevator, and staircase.
3.2 Installation Confirmation Items
Ensure the installation area meets the following criteria:
- Plasskrav: Allow at least 15cm above the unit, 1cm behind, and 1cm on each side for proper ventilation and operation.
- Høyde på kranen: The faucet should be 10-20cm higher than the top of the washing machine.
- Door Opening Space: Ensure 20-40cm of clear space in front of the machine for the door to open fully.
- Vanntett panne: Check for the presence of a waterproof pan and its inner dimensions. The installable waterproof pan requires an inner width of 590mm or more and an inner depth of 540mm or more.
- Additional costs may apply depending on the presence of a drain elbow, foot stand, and the drain port location.
Figure 3: Installation space requirements including clearances and waterproof pan dimensions.
3.3 Kompakt design
The ES-S7C-WL is designed to fit into standard spaces. Its body measures 59.6cm in width and 60.0cm in depth (excluding hoses), allowing it to be placed neatly within a typical waterproof pan (approx. 64cm x 64cm outer dimensions). The door height is 47.2cm, making it easy to load and unload laundry. Ample space is provided even when the door is fully open.
Figure 4: Compact drum dimensions and door height for easy access.
4. Bruksanvisning
This section details the basic operation of your washing machine.
4.1 Kontrollpanel overview
Familiarize yourself with the control panel for selecting wash cycles and options.
Figure 5: Control panel layout and detailed product dimensions.
4.2 Smart Energy Saving with 4 Sensors
The washing machine is equipped with four eco-sensors to optimize washing and drying performance while saving energy.
- Temperatursensor: Detects ambient temperature and drying conditions.
- Vannnivåsensor: Adjusts water usage based on the type of clothes.
- Weight Sensor: Determines the amount of clothes to optimize wash cycles.
- Vibrasjonssensor: Detects clothes imbalance during spin cycles.
Figure 6: The four eco-sensors for smart energy saving.
4.3 Plasmacluster Technology
The integrated Plasmacluster technology helps maintain cleanliness and freshness.
- Kurs i badekarrengjøring: A one-button operation to clean the washing tub using Plasmacluster ions.
- Deodorizing Course: For clothes that cannot be washed with water, this course uses Plasmacluster ions to remove odors.
Figure 7: Plasmacluster features for tub cleaning and deodorizing.
5. Vedlikehold
Regelmessig vedlikehold sikrer optimal ytelse og forlenger levetiden til vaskemaskinen din.
- Rengjøring av badekar: Utilize the Plasmacluster Tub Clean Course regularly to prevent mold and odors in the washing tub.
- Filterrengjøring: Clean the lint filter after every use to maintain drying efficiency.
- Utvendig rengjøring: Tørk av utsiden med en myk, damp klut. Ikke bruk skurende rengjøringsmidler.
- Dørpakning: Periodically wipe the door gasket to remove any residue or moisture.
6. Feilsøking
If you encounter issues with your washing machine, refer to the following common troubleshooting steps. For more complex problems, contact customer support.
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Maskinen starter ikke | Power cord unplugged, door not closed properly, child lock engaged. | Check power connection, ensure door is latched, deactivate child lock. |
| Overdreven vibrasjon/støy | Uneven load, machine not level, shipping bolts not removed. | Redistribute laundry, adjust leveling feet, ensure shipping bolts are removed. |
| Vann renner ikke ut | Drain hose kinked or clogged, drain filter clogged. | Check and clear drain hose, clean drain filter. |
| Klærne tørker ikke ordentlig | Lint filter clogged, overloaded, incorrect drying cycle selected. | Clean lint filter, reduce load size, select appropriate drying cycle. |
7. Spesifikasjoner
Detailed technical specifications for the SHARP ES-S7C-WL.
| Trekk | Spesifikasjon |
|---|---|
| Modellnummer | ES-S7C-WL |
| Kapasitet (vask/sentrifugering) | 7 kg |
| Kapasitet (tørr) | 3.5 kg |
| Totale dimensjoner (B x D x H) | 640 mm x 600 mm x 1039 mm (including drain hose) |
| Produktvekt | 76 kg |
| Strømforbruk (vask) | 60 Wh (50/60Hz) |
| Power Consumption (Wash to Dry) | 1600 Wh (50/60Hz) |
| Approximate Time (Wash) | 44 minutes (50/60Hz) |
| Approximate Time (Wash to Dry) | 170 minutes (50/60Hz) |
| Driftsstøy (vask) | 24 dB |
| Driftsstøy (sentrifugering) | 39 dB |
| Driftsstøy (tørr) | 36 dB |
| Water Usage (Wash to Spin 7kg) | 57 L |
| Water Usage (Wash to Dry 3.5kg) | 80 L |
| Voltage | 100 V (vekselstrøm) |
| Åpningsposisjon | Front |
| Trommemateriale | Rustfritt stål |
| Funksjoner | Inverter, Child Lock, Heater |
8. Garanti og støtte
For warranty information, please refer to the warranty card included with your product or visit the official SHARP website. If you require technical assistance or have questions not covered in this manual, please contact SHARP customer support.
SHARP Customer Support: Please refer to your regional SHARP webnettsted for kontaktinformasjon.