LDARC 199C Mini FPV Camera Instruction Manual

1. Introduksjon

The LDARC 199C Mini FPV Camera is a compact and lightweight camera designed for First-Person View (FPV) applications, primarily with racing drones and RC quadcopters. This manual provides essential information for the proper installation, operation, and maintenance of your 199C FPV camera.

2. Sikkerhetsinformasjon

• Always ensure correct polarity when connecting power to avoid damage to the camera and other components.
• Operate the camera within its specified voltage range (DC 5V).
• Avoid exposing the camera to moisture, extreme temperatures, or direct impact.
• Handle the camera with care, as it contains delicate electronic components.
• Disconnect power before performing any wiring changes or maintenance.

3. Hva er i esken

Når du åpner pakken, skal du finne følgende vare:

• 1x LDARC 199C Mini FPV Camera

Image: The LDARC 199C Mini FPV Camera as it appears in its retail packaging, indicating the product model and brand.

4. Produktet er overview

The LDARC 199C is engineered for minimal size and weight, making it ideal for micro and small FPV drones. Its compact design allows for flexible mounting options without significantly impacting the drone's flight characteristics.

Image: The LDARC 199C Mini FPV Camera shown resting on a fingertip, illustrating its extremely small and lightweight form factor.

Image: The LDARC 199C Mini FPV Camera with its physical dimensions clearly labeled, showing a length of 14mm, width of 12.2mm, and height of 12mm.

Image: The LDARC 199C Mini FPV Camera placed on a digital scale, which displays a weight of 1.6 grams, highlighting its ultra-light design.

5. Oppsett

5.1 Koblingsskjema

Connect the camera to your Flight Controller (FC) or Video Transmitter (VTX) according to the following wiring scheme:

• Rød ledning: +5V DC Power Input
• Svart ledning: GND (bakken)
• Gul ledning: Videoutgang

Bilde: Et nærbilde view of the LDARC 199C Mini FPV Camera's circuit board with its three-wire harness. The wires are color-coded: red for 5V power, black for ground (GND), and yellow for video signal output, indicating the correct connection points.

5.2 Montering

Securely mount the camera to your drone's frame. Ensure the lens has a clear, unobstructed view. Use appropriate mounting hardware (not included) to minimize vibrations, which can affect video quality. The camera is designed to fit into standard micro FPV drone camera mounts.

Image: The LDARC 199C Mini FPV Camera integrated into the front housing of a red and white racing drone, demonstrating a typical mounting configuration.

6. Bruksanvisning

Once the camera is correctly wired and mounted, connect your drone's battery. The camera will power on and begin transmitting a video signal through the connected Video Transmitter (VTX). Ensure your FPV goggles or monitor are tuned to the correct frequency of your VTX to receive the video feed.

• Strøm på: Apply DC 5V power to the camera via the red and black wires.
• Videoutgang: The yellow wire provides a standard analog video signal.
• Kompatibilitet: Compatible with most FPV video transmitters and receivers that support analog video input.

7. Vedlikehold

• Rengjøring av linse: Gently clean the camera lens with a soft, lint-free cloth and a specialized lens cleaning solution if necessary. Avoid abrasive materials.
• Lagring: Store the camera in a dry, cool environment away from direct sunlight and static electricity.
• Undersøkelse: Periodically inspect wiring for any signs of wear or damage.

8. Feilsøking

• Ingen videosignal:
  • Check all wiring connections, especially power (5V, GND) and video output.
  • Verify that the camera is receiving the correct 5V power supply.
  • Ensure your FPV goggles/monitor and VTX are on the same frequency and channel.
• Poor Video Quality (Fuzzy/Static):
  • Inspect the camera lens for dirt, dust, or damage.
  • Check for loose connections in the video signal path.
  • Ensure there is no electromagnetic interference from other drone components.
  • Verify the VTX antenna is securely connected and undamaged.
• Kameraet slår seg ikke på:
  • Confirm the power source is providing 5V DC.
  • Check for short circuits or incorrect wiring.

9. Spesifikasjoner

10. Garanti og støtte

For warranty information and technical support, please refer to the retailer where you purchased the LDARC 199C Mini FPV Camera or visit the official LDARC webnettstedet. Ta vare på kjøpsbeviset for eventuelle garantikrav.