Wilo YONOS PICO 25/1-8 (ROW) Sirkulasjonspumpe Brukerhåndbok

Introduksjon

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Wilo YONOS PICO 25/1-8 (ROW) circulator pump. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the product or injury to persons.

The Wilo YONOS PICO 25/1-8 (ROW) is an energy-efficient circulator pump designed for heating and cooling systems.

Produkt overview

Image: The Wilo YONOS PICO 25/1-8 (ROW) circulator pump, featuring a green pump housing and a grey control unit with a digital display and a green rotary knob for settings adjustment.

The Wilo YONOS PICO 25/1-8 (ROW) is a high-efficiency pump designed for various applications in heating and cooling systems. Its compact design allows for easy integration into existing setups.

Nøkkelfunksjoner:

• Maximum ease of use: Intuitive kontroller for enkel betjening.
• Optimised energy efficiency: Achieved through EC engine technology, 0.1 m adjustment, and a power consumption display.
• Quick and easy installation: Designed for convenient setup and replacement.
• Easy maintenance and long running time: Built for durability and minimal upkeep.
• Highest operating safety: Ensures reliable performance through proven technology.

Sikkerhetsinstruksjoner

Always observe the following safety instructions to prevent personal injury and damage to the pump:

• Installation and maintenance must only be carried out by qualified personnel.
• Sørg for at strømforsyningen er frakoblet før installasjons- eller vedlikeholdsarbeid.
• Protect the pump from frost and extreme temperatures.
• Ikke bruk pumpen tørr.
• Refer to local regulations and standards for electrical connections.

Oppsett og installasjon

Proper installation is crucial for the optimal performance and longevity of your Wilo YONOS PICO pump. Follow these steps carefully:

1. Utpakking: Carefully remove the pump from its packaging. Inspect for any visible damage.
2. Monteringsposisjon: Install the pump in a horizontal position with the motor shaft horizontal. Ensure sufficient space for maintenance and ventilation.
3. Rørtilkobling: Connect the pump to the heating/cooling system pipes using appropriate fittings. Ensure all connections are watertight.
4. Elektrisk tilkobling:
   • Ensure the main power supply is off.
   • Connect the pump to a 240V AC power source.
   • Follow the wiring diagram provided with the pump or consult a qualified electrician.
   • Sørg for riktig jording.
5. Fylling og lufting: After installation, fill the system with water and vent the pump and system thoroughly to remove any trapped air. The pump may have an automatic venting function.

Bruksanvisning

The Wilo YONOS PICO 25/1-8 (ROW) is designed for user-friendly operation. The control panel allows for easy adjustment of settings.

Kontrollpanel overview:

Image: Close-up of the control panel on the Wilo YONOS PICO pump, showing the digital display, a central green rotary knob, and various indicator lights and buttons for mode selection and power display.

• Digital skjerm: Shows current power consumption (W) and head (m).
• Roterende knott: Used to select operating modes and adjust settings. Turn to navigate, press to confirm.
• Driftsmoduser: The pump offers various operating modes, typically including constant differential pressure (Δp-c), variable differential pressure (Δp-v), and constant speed. Refer to the symbols on the control panel for specific mode selection.
• Power Consumption Display: The display indicates the real-time power consumption of the pump, aiding in energy monitoring.

Starte pumpen:

1. Ensure the system is filled and vented.
2. Switch on the main power supply to the pump.
3. The pump will typically start in a default mode. Use the rotary knob to select your desired operating mode and adjust the required head or speed.

Vedlikehold

Regular maintenance ensures the long-term reliability and efficiency of your Wilo YONOS PICO pump. Always disconnect power before performing any maintenance.

• Rengjøring: Keep the pump and its surroundings clean. Avoid using abrasive cleaners.
• Systemvannkvalitet: Ensure the heating/cooling system water quality meets manufacturer specifications to prevent corrosion and deposits.
• Isolasjon: Check the insulation around the pump and pipes for any damage.
• Lekkasjekontroller: Periodically inspect all connections for leaks.
• Profesjonell inspeksjon: It is recommended to have the pump and system inspected by a qualified technician annually.

Feilsøking

This section provides solutions to common issues you might encounter with your Wilo YONOS PICO pump. For problems not listed here, contact qualified service personnel.

Spesifikasjoner

Detailed technical specifications for the Wilo YONOS PICO 25/1-8 (ROW) circulator pump:

Garanti og støtte

Wilo provides a warranty for its products. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Wilo webnettstedet.

For technical support, spare parts, or service inquiries, please contact your local Wilo representative or authorized service partner. You can find contact information on the official Wilo webnettsted: www.wilo.com

Når du kontakter kundestøtte, må du ha produktets modellnummer (4215517) og serienummer (hvis aktuelt) klar.