1. Introduksjon
Thank you for choosing the Lixada Lii-500 Smart Battery Charger. This intelligent charger is designed to provide efficient and safe charging for various cylindrical rechargeable batteries, including 3.7V Li-ion and 1.2V Ni-MH types. It features four independent charging slots, multiple charging current options, and comprehensive safety protections. The integrated LCD provides real-time information on battery status, making it a versatile tool for battery management.
2. Sikkerhetsinformasjon
- Bruk bare den medfølgende strømadapteren.
- Ikke lad opp ødelagte eller lekkende batterier.
- Ensure correct battery polarity (+/-) before inserting into the charger.
- Hold laderen unna vann, fuktighet og høye temperaturer.
- Ikke demonter eller modifiser laderen.
- Children should use the charger under adult supervision.
- Trekk laderen ut av stikkontakten når den ikke er i bruk.
- The USB output function is only available when Li-ion 3.7V batteries are inserted.
3. Produktet er overview
The Lii-500 charger features a compact design with an intuitive LCD display and control buttons for easy operation.
Figur 3.1: Topp view of the Lixada Lii-500 charger, highlighting the four battery slots, LCD display, Mode button, and Current button.
Figur 3.2: Detaljert view of the LCD display, showing indicators for Charging Mode, Fast Test Mode, Normal Test Mode, End of Work Sign, Voltage Display, Current Selection, Electricity Volume Display, Battery Resistance Display, and Working Hours.
Figur 3.3: Bak view of the Lixada Lii-500 charger, showing the DC 12V power input port and the 5V USB output port.
Figur 3.4: Bunn view of the Lixada Lii-500 charger, displaying product specifications and regulatory marks.
4. Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Inngang Voltage | DC 12V / 2A (minimum) |
| Kompatible batterityper | 3.7V Li-ion, 1.2V Ni-MH / Ni-Cd |
| Kompatible batteristørrelser | Diameter: 8-26mm, Height: 34-71mm (e.g., 26650, 22650, 18650, 18490, 18500, 17500, 17355, 16340 (RCR123), 14500, 10440, AAA, AA, C) |
| Charge Output (Li-ion) | 4.2V at 300mA / 500mA / 700mA / 1000mA (per slot) |
| Charge Output (Ni-MH/Cd) | 1.48V at 300mA / 500mA / 700mA / 1000mA (per slot) |
| Lading Cut-off Voltage (Li-ion) | 4.2V ± 0.05V |
| Discharge Output | 500mA (cutoff Li-ion 2.8V / NiMH 0.9V) |
| USB-utgang | 5V 1000mA (only with Li-ion 3.7V battery inserted) |
| Utstilling | LCD (Voltage, Current, Capacity, Impedance, Time) |
| Sikkerhetsbeskyttelse | Over current, over charge, short circuit, reverse polarity |
| Dimensjoner | 9.29 x 6.65 x 1.93 tommer (ca.) |
| Vekt | 14.8 unser (ca.) |
5. Oppsett
- Pakk ut laderen: Carefully remove the Lii-500 charger and its accessories from the packaging.
- Koble til strøm: Plug the provided DC 12V power adapter into the charger's DC 12V input port (5.5mm outer diameter, 2.1mm inner diameter) and then into a wall outlet. The LCD screen will illuminate.
- Første visning: Upon power-on, the charger will display "null" on the LCD if no batteries are inserted.
Video 5.1: An unboxing and initial setup demonstration of the Lii-500 charger, showing the contents of the package and how to connect the power adapter.
6. Bruksanvisning
6.1. Lading av batterier
- Sett inn batterier: Place one or more compatible batteries into the charging slots, ensuring correct polarity. The charger will automatically detect the battery type (Li-ion or Ni-MH) and display its voltage.
- Velg modus: Trykk på MODUS knapp for å bla gjennom tilgjengelige moduser: LADE, RASK TEST, og NOR TEST. For standard charging, select LADE.
- Velg Gjeldende: Mens i LADE modus, trykk på NÅVÆRENDE button to select the desired charging current (300mA, 500mA, 700mA, or 1000mA). The selected current will apply to all inserted batteries.
- Start lading: The charger will automatically begin charging after a few seconds of inactivity or after selecting the current. The LCD will display real-time charging status.
- Fullføring: When charging is complete, the LCD will display "End".
6.2. Battery Testing Modes
The Lii-500 offers two testing modes to determine battery capacity:
- RASK TEST: This mode quickly determines the battery's capacity by first discharging and then fully charging the battery.
- NOR TEST (Normal Test): This mode provides a more accurate capacity measurement. It involves fully charging the battery, then discharging it to measure capacity, and finally recharging it.
To use a test mode:
- Sett inn batterier.
- Trykk på MODUS button to select either RASK TEST or NOR TEST.
- Trykk på NÅVÆRENDE button to select the desired discharge/charge current for the test.
- The test will begin automatically. The LCD will show the measured capacity (mAh) upon completion.
6.3. USB-utgangsfunksjon
The charger can function as a power bank to charge 5V electronic devices via its USB output port. This function is only available when 3.7V Li-ion batteries are inserted into the charging slots.
- Insert charged 3.7V Li-ion batteries into the slots.
- Connect your 5V electronic device (e.g., smartphone) to the USB output port using a compatible USB cable.
- The charger will provide 5V 1000mA output.
7. Batterikompatibilitet
The Lixada Lii-500 is compatible with a wide range of cylindrical rechargeable batteries. Ensure your batteries fall within the specified dimensions and voltage typer.
- Li-ion Batteries (3.7V): 26650, 22650, 18650, 18490, 18500, 17500, 17355, 16340 (RCR123), 14500, 10440.
- Ni-MH / Ni-Cd Batteries (1.2V): AAA, AA, C (Mignon, Bady, Sub-C, A).
- Fysiske dimensjoner: Battery diameter must be between 8mm and 26mm. Battery height must be between 34mm and 71mm.
8. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Laderen slår seg ikke på | Ingen strøm, defekt adapter, løs kontakt. | Sjekk strømuttaket, sørg for at adapteren er ordentlig tilkoblet, prøv et annet uttak. |
| Battery not charging / "null" displayed | Incorrect battery insertion, incompatible battery, deeply discharged battery, faulty battery. | Re-insert battery with correct polarity, ensure battery type/size is compatible, try a different battery. Some deeply discharged batteries may not be recognized immediately. |
| USB-utgangen fungerer ikke | No Li-ion 3.7V battery inserted, battery too low, faulty USB cable/device. | Ensure charged 3.7V Li-ion batteries are in slots, check battery charge level, try a different USB cable or device. |
| Laderen overopphetes | Poor ventilation, high ambient temperature, faulty battery. | Ensure adequate ventilation around the charger, operate in a cool environment, remove any faulty batteries. |
9. Vedlikehold
- Rengjøring: Bruk en myk, tørr klut til å rengjøre laderen. Ikke bruk slipende rengjøringsmidler eller løsemidler.
- Lagring: Oppbevar laderen på et kjølig, tørt sted vekk fra direkte sollys og ekstreme temperaturer.
- Unngå innvirkning: Do not drop or subject the charger to heavy impact.
10. Garanti og støtte
For garantiinformasjon og kundestøtte, se dokumentasjonen som fulgte med kjøpet, eller kontakt forhandleren. Ta vare på kjøpsbeviset for eventuelle garantikrav.