COMAN Professional Video Tripod DV1000 User Manual

1. Introduksjon

Thank you for choosing the COMAN Heavy Duty Professional Video Tripod, Model DV1000. This tripod is engineered for stability and precision, designed to support DSLR cameras, camcorders, and spotting scopes. Its robust aluminum construction and advanced fluid head ensure smooth operation and reliable performance for professional videography and photography.

1.1 Sikkerhetsinformasjon

• Always ensure the tripod is placed on a stable, level surface before mounting any equipment.
• Do not exceed the maximum load capacity of 13.2 lbs (6 kg) to prevent damage to the tripod or your equipment.
• Secure all locking mechanisms (leg locks, pan/tilt locks, quick release plate) before leaving the tripod unattended.
• Be cautious when extending or collapsing the legs to avoid pinching fingers.
• Avoid exposing the tripod to extreme temperatures or corrosive substances.

2. Oppsett

2.1 Utpakking og innholdskontroll

Ta forsiktig alle komponentene ut av emballasjen. Kontroller at alle delene er til stede:

• 1 x Q6 Fluid Head with FF16LS tripod
• 1 x bæreveske
• 2 x sekskantnøkkel
• 1 x Quick Release Plate (with 1/4" and 3/8" screws)

Figure 2.1: COMAN DV1000 Tripod components including the main tripod unit, fluid head, quick release plate, and carrying bag.

Figur 2.2: Detaljert view of the packing list and key specifications of the COMAN DV1000 tripod.

2.2 Forlenge stativbena

The tripod features a humanized tube flip locking system for quick and convenient setup.

1. Plasser stativet på en flat overflate.
2. Release the leg flip locks on each section of the tripod legs.
3. Extend the legs to the desired height. The tripod can adjust from 32.7 inches (minimum) to 72 inches (maximum).
4. Securely close all leg flip locks to ensure stability.
5. Adjust the mid-level spreaders to further enhance stability, especially on uneven terrain.

Figure 2.3: Illustration of the tripod's adjustable height range, from folded to fully extended.

2.3 Feste hurtigutløserplaten til kameraet

The quick release plate is designed for easy attachment and detachment of your camera.

1. Locate the 1/4" and 3/8" screws on the quick release plate. Choose the appropriate screw for your camera or camcorder.
2. Attach the quick release plate to the bottom of your camera by screwing it in until secure. Use the hidden Allen wrench if needed for the 3/8" screw.
3. Ensure the plate is firmly attached to prevent accidental rotation or detachment.

Figure 2.4: Exploded diagram showing the quick release plate with 1/4" and 3/8" screws, safety pin, and other fluid head components.

2.4 Mounting Your Camera to the Tripod

The Q6 Fluid Head features a new quick install system for fast and secure mounting.

1. Ensure the quick release plate is securely attached to your camera.
2. Align the quick release plate (with camera attached) with the receiver on the fluid head.
3. Slide the plate into the receiver until it clicks into the locked state. A safety button on the left side of the fluid head prevents accidental release.
4. Verify that the camera is firmly seated and locked in place before releasing grepet ditt.

Figure 2.5: Close-up of the fluid head demonstrating the quick install system for locking and releasing the camera plate.

Figure 2.6: The fluid head's dual-mode quick release plate design, compatible with both DJI RS2/RS3 and Manfrotto standard quick release plates.

3. Bruksanvisning

3.1 Using the Fluid Head

The professional fluid head allows for smooth and precise camera movements.

• Pan bevegelse: To pan the camera horizontally (360°), loosen the pan locking knob (refer to Figure 2.4). Once the desired position is reached, tighten the knob to secure.
• Tilt bevegelse: To tilt the camera vertically (-75° to +90°), loosen the tilt locking knob (refer to Figure 2.4). Adjust the camera to the desired angle and then tighten the knob. The built-in damping system ensures smooth tilting.
• Håndtak på pannen: The detachable retractable handle provides ergonomic control over pan and tilt movements. Adjust its length for comfortable operation.

Figure 3.1: Demonstrates the adjustable shooting angle capabilities of the fluid head, including 360° horizontal rotation and -70° to +90° vertical tilt.

Figure 3.2: Visual representation of the fluid head's professional features, including precise damping and accurate tracking for pan and tilt.

3.2 Lastekapasitet

The COMAN DV1000 tripod is designed to support a maximum payload of 13.2 lbs (6 kg). Ensure your camera and accessories do not exceed this weight limit for optimal performance and safety.

Figure 3.3: The tripod's high loading capacity, capable of supporting up to 13.2 lbs (6 kg).

4. Vedlikehold

Proper maintenance will extend the lifespan of your COMAN DV1000 tripod.

• Rengjøring: Wipe down the aluminum legs and fluid head with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp klut og mild såpe, og tørk deretter grundig. Unngå sterke kjemikalier eller slipende materialer.
• Smøring: The fluid head is factory-lubricated. Do not attempt to disassemble or lubricate the fluid head yourself, as this may damage the damping system.
• Lagring: Store the tripod in its carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Inspeksjoner: Periodically check all screws, bolts, and locking mechanisms for tightness. Use the provided hex wrenches to tighten any loose parts.

5. Feilsøking

If you encounter any issues with your COMAN DV1000 tripod, refer to the following common problems and solutions:

For issues not covered here or if solutions do not resolve the problem, please contact COMAN customer support for assistance.

6. Spesifikasjoner

7. Garanti og støtte

COMAN is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, inquiries, or assistance with any issues, please contact COMAN customer service. We are dedicated to helping you resolve any problems promptly.

"If there are any doubts and questions, please send an email to us, we will help you deal with the problem at the first time!"