Petlibro Automatic Pet Feeder 3L White User Manual

1. Introduksjon

Thank you for choosing the Petlibro Automatic Pet Feeder. This device is designed to provide consistent and timely meals for your pet, ensuring they are fed according to a set schedule, even when you are away. Please read this manual thoroughly before use to ensure proper operation and maintenance of your feeder.

2. Viktig sikkerhetsinformasjon

Vennligst følg følgende sikkerhetsregler for å forhindre skade eller skade på produktet:

• Read all instructions carefully before operating the feeder.
• Keep the feeder away from children and pets when not in use or during assembly.
• Ikke senk hovedenheten i vann eller andre væsker.
• Use only dry pet food with a diameter between 5-15mm. Do not use wet, canned, or moist food.
• Sørg for at materen er plassert på en stabil og jevn overflate.
• Trekk ut støpselet til materen før rengjøring eller vedlikehold.
• Do not attempt to repair or modify the feeder yourself. Contact customer support for assistance.
• Kast batterier på en ansvarlig måte i henhold til lokale forskrifter.

3. Pakkens innhold

Vennligst sjekk innholdet i pakken for å sikre at alle varene er til stede:

• Petlibro Automatic Pet Feeder Main Unit
• Matskål
• USB-C strømadapter og kabel
• Desiccant Bag (pre-installed or separate)
• Brukerhåndbok

4. Produktet er overview

Familiarize yourself with the different parts of your Petlibro Automatic Pet Feeder:

• Mattank: Stores dry pet food.
• Lokk: Covers the food tank to keep food fresh.
• Kontrollpanel: Buttons and display for setting schedules and manual feeding.
• Matutsalg: Where food dispenses into the bowl.
• Matskål: Detachable bowl for your pet to eat from.
• Power Port (USB-C): Kobles til strømadapteren.
• Batterirom: Holds backup batteries (not included).

5. Oppsett

Follow these steps to set up your Petlibro Automatic Pet Feeder:

5.1 Montering

1. Pakke ut: Fjern forsiktig alle komponenter fra emballasjen.
2. Installer matskål: Place the food bowl securely at the base of the feeder.
3. Install Food Tank: Align the food tank with the base and twist to lock it into place.
4. Sett inn tørkemiddelposen: If not pre-installed, open the desiccant compartment (usually under the lid) and insert the desiccant bag to keep food fresh. Replace every 15-30 days.

Image: Step-by-step assembly guide for the Petlibro Automatic Pet Feeder. It shows how to twist open the lid, take out the food bowl, put the desiccant bag into its compartment, install the food tank, put the lid back on, and finally install the food bowl.

5.2 Strømforsyning

The feeder can be powered by a USB-C adapter or backup batteries.

1. Primærkraft: Connect the USB-C power adapter to the feeder's power port and plug it into a wall outlet.
2. Batteribackup (valgfritt): For kraft outages, install 3 D-cell batteries (not included) into the battery compartment at the bottom of the feeder. This ensures continuous operation.

Image: Diagram illustrating the dual power supply system of the Petlibro Automatic Pet Feeder. It shows the USB-C adapter connected for primary power and the battery compartment for backup power. A note indicates that batteries are not included.

6. Bruksanvisning

Once assembled and powered, you can begin programming your feeder.

6.1 Fylle mattanken

1. Åpne lokket på mattanken.
2. Pour dry pet food into the tank. Ensure the food is within the recommended size (5-15mm diameter).
3. Close the lid securely to maintain freshness.

6.2 Setting Meal Schedules and Portions

The feeder allows you to schedule up to 6 meals per day, with 1 to 50 portions per meal.

Image: A cat eating from the Petlibro Automatic Pet Feeder, illustrating the feeder's function. Text overlays indicate "Portion: 1-50" and "Meals: 1-6", highlighting the customizable feeding schedule.

1. Still inn gjeldende tid: Use the control panel buttons (e.g., "SET", "UP", "DOWN") to set the current time.
2. Program Meal Times: Press the "MEAL" button to enter meal programming mode. Select the desired meal number (e.g., Meal 1) and set the feeding time.
3. Angi porsjoner: For each programmed meal, set the number of portions (1-50) using the "PORTION" or "UP/DOWN" buttons.
4. Repeat for all meals: Program up to 6 meals as needed.
5. Lagre innstillinger: Ensure all settings are saved according to the feeder's specific interface (usually by pressing "SET" or waiting for auto-save).

6.3 Manuell fôring

To dispense food instantly, press the manual feed button (often labeled "FEED" or a paw icon) on the control panel. Each press typically dispenses one portion.

7. Vedlikehold og rengjøring

Regelmessig rengjøring sikrer hygiene og forlenger levetiden til materen din.

1. Koble fra: Always unplug the feeder from the power outlet before cleaning.
2. Demonter: Remove the food bowl and food tank.
3. Rengjør komponenter: Wash the food bowl and food tank with mild soap and water. Rinse thoroughly and dry completely before reassembling.
4. Tørk av hovedenheten: Tørk av hovedenheten med en myk, damp klut. Ikke senk hovedenheten i vann.
5. Replace Desiccant: Replace the desiccant bag every 15-30 days to maintain food freshness.
6. Sett sammen igjen: Sørg for at alle delene er tørre før du monterer materen igjen.

8. Feilsøking

If you encounter issues with your feeder, refer to the following common problems and solutions:

9. Spesifikasjoner

10. Garanti og støtte

Your Petlibro Automatic Pet Feeder comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your package or visit the official Petlibro webnettstedet.

If you have any questions, require technical support, or need assistance with your product, please contact Petlibro customer service. Contact details can typically be found on the product packaging, the official website, or by searching for "Petlibro customer support" online.