REACHER Mini Battery Operated Alarm Clock User Manual

Introduksjon

Thank you for choosing the REACHER Mini Battery Operated Alarm Clock. This compact and user-friendly digital alarm clock is designed for simplicity and portability, making it ideal for travel, desks, shelves, or bedside tables. It features basic operation for setting time and alarm, a convenient snooze function, a backlight for night viewing, and a display ON/OFF switch to conserve battery life.

Pakkeinnhold

• REACHER Mini Battery Operated Alarm Clock
• Brukerhåndbok

Produkt overview

Familiarize yourself with the clock's components and controls.

Front View

Figur 1: Foran view of the REACHER Mini Battery Operated Alarm Clock, showing the digital display and compact size.

Toppkontroller

Figur 2: Øverst view of the clock, highlighting the 'H' (Hour), 'SNOOZE/LIGHT', and 'M' (Minute) buttons.

• H-knapp: Used to adjust the hour.
• M-knapp: Used to adjust the minute.
• SNOOZE/LYS-knapp: Press to activate backlight for 5 seconds or to snooze a sounding alarm.

Rear Controls and Battery Compartment

Figur 3: Bak view of the clock, showing the battery compartment and various setting buttons.

• 12/24HR Button: Veksler mellom 12-timers og 24-timers tidsformater.
• TIME-knapp: Brukes til å gå inn i tidsinnstillingsmodus.
• ALARM-knapp: Used to enter alarm setting mode.
• DISPLAY ON/OFF Switch: Slide switch to turn the display on or off to save battery.

Oppsett

Installasjon av batteri

1. Åpne batteridekselet på baksiden av klokken.
2. Sett inn 2 AAA-batterier (ikke inkludert), og sørg for riktig polaritet (+/-).
3. Lukk batteridekselet godt.

Innledende tidsinnstilling

1. Trykk og hold inne TID knappen på baksiden av klokken til timesifrene begynner å blinke.
2. Bruk H button on the top to adjust the hour.
3. Trykk på TID knappen igjen, og minuttsifrene vil blinke.
4. Bruk M button on the top to adjust the minutes.
5. Trykk på TID knappen én gang til for å bekrefte og avslutte tidsinnstillingsmodus.

Bruksanvisning

Stille inn alarmen

1. Trykk og hold inne ALARM button on the back of the clock until the alarm hour digits begin to flash. An alarm icon will appear on the display.
2. Bruk H button on the top to adjust the alarm hour.
3. Trykk på ALARM knappen igjen, og minuttsifrene for alarmen vil blinke.
4. Bruk M button on the top to adjust the alarm minutes.
5. Trykk på ALARM button once more to confirm and exit alarm setting mode. The alarm is now set and active.

Aktivere/deaktivere alarmen

• To turn the alarm ON or OFF, simply press the ALARM button briefly. The alarm icon on the display indicates if the alarm is active.

Snooze-funksjon

• Når alarmen går, trykker du på den store SNOOZE / LIGHT button on the top of the clock to activate the snooze function. The alarm will pause for approximately 5 minutes and then sound again.

Aktivering av bakgrunnsbelysning

Figure 4: The clock display with its backlight activated for improved visibility in low light conditions.

• To temporarily illuminate the display, press the SNOOZE / LIGHT button on the top of the clock. The backlight will activate for approximately 5 seconds.

Display PÅ/AV

Figur 5: Side view of the clock, illustrating the physical switch to turn the display ON or OFF.

• To conserve battery power, slide the DISPLAY PÅ/AV switch on the back of the clock to the 'OFF' position. The timekeeping will continue internally, but the display will be blank. Slide to 'ON' to reactivate the display.

12/24-timers format

• Trykk på 12/24 timer button on the back of the clock to switch between 12-hour (with AM/PM indicator) and 24-hour time formats.

Vedlikehold

• Rengjøring: Tørk av klokken med en myk, tørr klut. Ikke bruk slipende rengjøringsmidler eller løsemidler.
• Batteribytte: Replace batteries when the display dims or the clock functions become unreliable. Always replace both batteries at the same time.
• Lagring: Hvis klokken skal oppbevares over lengre tid, må du ta ut batteriene for å forhindre lekkasje.

Feilsøking

• Displayet er tomt: Check if the DISPLAY ON/OFF switch on the back is in the 'ON' position. Ensure batteries are correctly installed and not depleted.
• Alarmen går ikke: Verify that the alarm is set and activated (alarm icon visible). Ensure batteries are not low.
• Feil tidspunkt: Reset the time following the 'Initial Time Setting' instructions.

Spesifikasjoner

Figure 6: Image illustrating the compact dimensions of the alarm clock.

Garanti og støtte

For warranty information or product support, please refer to the documentation included with your purchase or contact REACHER customer service directly. Contact details are typically provided on the product packaging or the manufacturer's official webnettstedet.