Berdsen ClearJet X3 Portable Dental Water Flosser User Manual

1. Viktig sikkerhetsinformasjon

Les alle instruksjonene nøye før du bruker dette produktet. Ta vare på denne håndboken for senere referanse.

• Do not immerse the device in water. The device is IPX7 waterproof, but the charging port should be kept dry.
• Dette apparatet er ikke beregnet for bruk av personer (inkludert barn) med reduserte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og kunnskap, med mindre de har fått tilsyn eller instruksjoner om bruk av apparatet av en person som er ansvarlig for deres sikkerhet.
• Barn bør overvåkes for å sikre at de ikke leker med apparatet.
• Use only clean water or dentist-recommended mouthwash. Do not use iodine, saline, or water-insoluble concentrated essential oils.
• If you have had oral surgery or gum disease, consult your dentist before using this device.
• Do not direct water under the tongue, into the ear, nose, or other delicate areas. This product is capable of producing pressures that may cause damage in these areas.
• Ensure the charging cable is fully inserted into the charging port during charging.
• Trekk laderen ut av stikkontakten når den ikke er i bruk.

2. Pakkens innhold

Bekreft at alle varene er inkludert i pakken din:

• Berdsen ClearJet X3 Oral Irrigator
• Standard Nozzles (x2)
• Tongue Cleaner Nozzle (x1)
• Orthodontic Nozzle (x1)
• Ladekabel (USB)
• Brukerhåndbok

Image: The Berdsen ClearJet X3 water flosser unit displayed alongside its four interchangeable nozzles (two standard, one tongue cleaner, one orthodontic) and the charging cable.

3. Produktet er overview

Familiarize yourself with the components of your Berdsen ClearJet X3.

Bilde: En detaljert view of the Berdsen ClearJet X3 water flosser, highlighting the main unit with its control panel and attached nozzle.

1. Nozzle Release Button: Press to detach the nozzle.
2. Munnstykke: Interchangeable tips for various cleaning needs.
3. Vanninntak: Where water is drawn into the nozzle.
4. På/av-knapp: Slår enheten av eller på.
5. Modusknapp: Cycles through operating modes (Normal, Soft, Pulse).
6. Modusindikatorer: LEDs to show the currently selected mode.
7. Vanntank: Gjennomsiktig reservoar for vann.
8. Ladeport: Located at the bottom for connecting the charging cable.

Image: A close-up of the Berdsen ClearJet X3's control panel, featuring the 'On/Off' button, 'Mode' button, and LED indicators for 'Normal', 'Soft', and 'Pulse' settings.

4. Oppsett og lading

4.1 Innledende lading

Before first use, fully charge the device. The integrated battery ensures portability.

1. Locate the charging port at the bottom of the device.
2. Insert the charging cable firmly into the port.
3. Connect the other end of the USB cable to a suitable USB power adapter (not included) or a computer USB port.
4. Ladeindikatorlampen vil lyse. En full lading tar vanligvis flere timer.
5. Koble fra kabelen når den er fulladet.

Image: The base of the Berdsen ClearJet X3 water flosser, illustrating the charging port with a connected USB cable, indicating the device is being charged.

4.2 Feste en dyse

1. Select the desired nozzle (standard, tongue cleaner, or orthodontic).
2. Sett dysen inn i åpningen øverst på tanntråden til den klikker ordentlig på plass.
3. To remove, press the nozzle release button and pull the nozzle upwards.

Bilde: Et nærbilde view of the four distinct nozzles provided with the Berdsen ClearJet X3: two standard tips, one tongue cleaning attachment, and one specialized orthodontic tip.

4.3 Fylle vanntanken

1. Open the water tank cover located on the side of the device.
2. Fill the 150ml tank with lukewarm water. You may also use dentist-recommended mouthwash.
3. Close the water tank cover firmly to prevent leakage.

Bilde: En sideprofffile of the Berdsen ClearJet X3 water flosser, clearly showing its transparent 150ml water tank, which allows users to monitor the water level.

5. Betjening av enheten

5.1 Valg av driftsmodus

The Berdsen ClearJet X3 offers three operating modes:

• Normal: Standard mode for effective daily cleaning and plaque removal.
• Myk: Gentle mode for sensitive gums or first-time users.
• Puls: Pulsating massage mode for gum stimulation and improved circulation.

Trykk på Modus button to cycle through these settings. The corresponding LED indicator will light up.

Bilde: En detaljert view of the Berdsen ClearJet X3's mode selection area, clearly showing the three distinct operating modes: Normal, Soft, and Pulse, each with its own indicator light.

5.2 Bruksanvisning

1. Ensure the water tank is filled and a nozzle is securely attached.
2. Select your desired operating mode.
3. Len deg over en vask og plasser dysespissen i munnen, slik at den rettes mot tannkjøttet i en 90-graders vinkel.
4. Trykk på På/Av button to start the water flow.
5. Før vannstrålen langs tannkjøttet, med en kort pause mellom tennene. La vannet renne ned i vasken.
6. The device features a 2-minute auto-timer, after which it will automatically shut off.
7. Etter bruk, trykk på På/Av button to turn off the device if it hasn't already.

Image: A user demonstrating the correct technique for using the Berdsen ClearJet X3 water flosser, showing the water jet effectively cleaning between teeth and along the gumline.

6. Vedlikehold og rengjøring

Regelmessig rengjøring sikrer optimal ytelse og hygiene.

6.1 Etter hver bruk

1. Tøm eventuelt gjenværende vann fra tanken.
2. Run the device briefly with an empty tank to clear any residual water from the internal components.
3. Remove the nozzle and rinse it under running water.
4. Tørk av hovedenheten med en myk, damp klut. Ikke bruk skurende rengjøringsmidler.
5. Allow all parts to air dry before storing.

6.2 Descaling (Monthly)

To prevent mineral buildup, descale the unit monthly:

1. Mix 1 part white vinegar with 2 parts water in the water tank.
2. Run the solution through the device until the tank is empty.
3. Rinse the tank and run two full tanks of clean water through the device to flush out any vinegar residue.

7. Feilsøking

8. Spesifikasjoner

9. Informasjon om avhending

This product contains an integrated battery and electronic components. Do not dispose of the product with general household waste at the end of its service life. Please dispose of it at an official collection point for the recycling of electrical and electronic equipment. This helps protect the environment and human health.