QSC CP8-NA

QSC CP8 8-Inch Compact Powered Loudspeaker Instruction Manual

Brand: QSC | Model: CP8-NA

1. Introduksjon

The QSC CP8 8-Inch Compact Powered Loudspeaker is designed for high performance, superior quality, and lasting reliability. This ultra-compact and highly portable loudspeaker features a 1000-Watt peak power Class-D amplifier module, matching transducers, and advanced DSP for exceptional sound quality. It is suitable for various applications including main PA, stage monitor, or instrument amplifikasjon.

2. Nøkkelfunksjoner

  • Compact and powerful performance; Light weight and highly portable.
  • 1000 Watt peak power Class-D amplifier modul.
  • Easily selected contours for commonly-used applications.
  • Advanced DSP with Intrinsic Correction for superior sound quality and speaker protection.
  • Directivity Matched Transition (DMT) for consistent frequency response across the entire coverage area.
  • Professional appearance looks great in any application.
  • Use for main PA, stage monitor, or instrument amplifier with the option to elevate the speaker via the 35 mm pole socket.

3. Oppsett

Before operating your QSC CP8 loudspeaker, ensure it is placed on a stable surface or mounted securely. The speaker can be used in various orientations: floor standing, as a stage monitor, or mounted on a speaker pole.

Front view of the QSC CP8 loudspeaker

Figur 1: Foran view of the QSC CP8 loudspeaker, showcasing its compact design and protective grille.

Rear panel of the QSC CP8 loudspeaker showing inputs and controls

Figure 2: Rear panel of the QSC CP8 loudspeaker, detailing the input/output connections, gain controls, and DSP contour settings.

3.1 Koble til strøm

  1. Sørg for at strømbryteren på bakpanelet er i «AV»-posisjon.
  2. Connect the provided power cord to the AC inlet on the rear panel.
  3. Koble den andre enden av strømledningen til en passende stikkontakt.

3.2 Lydtilkoblinger

  1. Connect your audio source (mixer, microphone, instrument, etc.) to the 'MIC/LINE' or 'LINE' input jacks on the rear panel.
  2. Use the 'MIX OUT' XLR connector to send a mixed signal to another CP8 loudspeaker or a subwoofer.

4. Bruksanvisning

4.1 Slå på/av

  1. To power on, flip the power switch on the rear panel to the 'ON' position. The power LED on the front of the speaker will illuminate.
  2. For å slå av, vri strømbryteren til «AV»-posisjon.

4.2 Adjusting Volume and Gain

  • Use the 'GAIN A+B' and 'GAIN C' knobs on the rear panel to adjust the input level for each channel. Start with the gain set low and gradually increase it to avoid distortion.
  • The 'LIMITER' LED indicates when the internal limiter is active. Reduce the input gain if this LED is frequently lit.

4.3 DSP Contours

The CP8 features selectable DSP contours to optimize sound for different applications:

  • MISLIGHOLDE: General purpose setting.
  • DANCE: Enhanced bass response for music playback.
  • EXT SUB: Optimized for use with an external subwoofer.
  • GULV MONITOR: Reduces low-frequency build-up for stage overvåking.
  • TALE: Forbedrer vokal klarhet.

Select the appropriate contour using the switch on the rear panel.

4.4 Bluetooth-tilkobling

The QSC CP8 supports Bluetooth for wireless audio streaming. Refer to the detailed instructions in the full user manual for pairing procedures with your device.

5. Vedlikehold

  • Rengjøring: Use a soft, dry cloth to clean the exterior of the loudspeaker. Avoid using abrasive cleaners or solvents.
  • Lagring: Store the loudspeaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • Håndtering: Always use the integrated handles when moving the loudspeaker. Avoid dropping or subjecting the unit to severe impacts.

6. Feilsøking

  • Ingen lyd: Check all power and audio connections. Ensure the gain controls are set appropriately and the audio source is active. Verify the correct DSP contour is selected.
  • Forvrengt lyd: Reduce the input gain. If the 'LIMITER' LED is constantly lit, the input signal is too high. Check the audio source for distortion.
  • Strømproblemer: Sørg for at strømledningen er ordentlig tilkoblet og at strømuttaket fungerer.

7. Spesifikasjoner

TrekkDetalj
MonteringstypeGulvstående, veggmontert
MaterialePlast
ModellnavnCP8-NA
HøyttalertypeFølge
SpesialfunksjonBærbar
Anbefalt brukFor main PA, stage monitor, instrument amplification, and portable PA systems
Kompatible enheterBærbar PC, MP3-spiller, smarttelefon, nettbrett
Antall enheter1.0 telling
FargeSvart
Produktdimensjoner14" D x 20" B x 14" H
Varevekt10 pund
KontrollmetodeRøre
Trådløs kommunikasjonBluetooth
Høyttalerstørrelse8 tommer
StrømkildeElektrisk med ledning
Basshøyttalerdiameter20.32 centimeter
Diskanthøyttalerens diameter1 tommer
Høyttaler AmplifikasjonstypeAktiv
Wattage1000 watt
Frekvensrespons20 KHz
TilkoblingsteknologiAuxiliary

8. Hva er i esken

  • QSC CP8 8-Inch Compact Powered Loudspeaker
  • Brukerhåndbok
  • Strømledning

9. Garanti og støtte

The QSC CP8 8-Inch Compact Powered Loudspeaker is protected by a global 3-year warranty with product registration. For detailed warranty information, technical support, or service inquiries, please visit the official QSC webnettstedet eller kontakt deres kundeserviceavdeling.

For ytterligere ressurser og produktinformasjon, vennligst besøk QSC Store on Amazon.