Donner Revecho Reverb Delay Pedal EC1118 Instruction Manual

1. Produktet er overview

The Donner Revecho is a versatile 2-in-1 guitar effect pedal, combining both reverb and delay effects. Designed for electric guitarists, it offers a compact solution for adding depth and ambiance to your sound. This pedal features independent controls for each effect, including a Tap Tempo function for precise delay synchronization and an Effect Tail feature for natural decay.

Nøkkelfunksjoner:

• 2-in-1 Pedal: Seamlessly integrates delay and reverb effects.
• Instant Precision Control: Adjustable effect level, delay time, delay feedback, and reverberation time.
• Trykk Tempo: Provides instantaneous control over delay time for rhythm synchronization.
• Effect Tail: Enhances playability by allowing notes and chords to decay naturally after disengagement.
• Kompakt design: User-friendly form factor with buffer bypass for tonal purity.

Figur 1: Foran view of the Donner Revecho Reverb Delay Pedal.

2. Installasjonsinstruksjoner

Strømkrav:

The Donner Revecho pedal requires a 9V DC power adapter with a center-negative polarity and a minimum current of 100mA. This product does not come with a battery compartment. Using an improper power supply may cause the pedal to malfunction or result in damage.

Koble til pedalen:

1. Koble gitaren til IN kontakten på høyre side av pedalen ved hjelp av en standard 6,5 mm instrumentkabel.
2. Koble til UTE jekken på venstre side av pedalen til din amplifier eller den neste pedalen i signalkjeden din ved hjelp av en standard 6,5 mm instrumentkabel.
3. Koble 9V DC-strømadapteren til 9V DC inngangskontakt.

Figur 2: Vinklet view showing the input (IN) and output (OUT) jacks, and the 9V DC power input.

3. Bruksanvisning

The Revecho pedal features five control knobs and two footswitches for comprehensive sound shaping.

Kontroller:

• REVERB: Adjusts the overall level or intensity of the reverb effect.
• FORFALL: Controls the length of the reverb tail, from short to long.
• NIVÅ: Justerer det totale utgangsvolumet til pedalen.
• TILBAKEBRING: Determines the number of delay repeats. Higher settings result in more repeats.
• UTSETTE: Controls the delay time, from short slap-back echoes to long, atmospheric delays.

Fotbrytere:

• REVERB HOLD (TAIL): Activates or deactivates the reverb effect. Holding this footswitch engages the Effect Tail feature, allowing the reverb to naturally decay even after the effect is disengaged.
• DELAY HOLD (TAP): Activates or deactivates the delay effect. Tapping this footswitch multiple times sets the Tap Tempo for the delay time. Holding this footswitch will sustain the current delay repeats.

Figur 3: Øverst view of the pedal with control knobs and footswitches.

4. Vedlikehold

To ensure the longevity and optimal performance of your Donner Revecho pedal, follow these maintenance guidelines:

• Rengjøring: Bruk en myk, tørr klut til å rengjøre utsiden av pedalen. Unngå å bruke slipende rengjøringsmidler eller løsemidler, da de kan skade overflaten.
• Lagring: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. If not in use for an extended period, disconnect the power supply.
• Tilkoblinger: Sjekk alle kabeltilkoblinger med jevne mellomrom for slitasje. Sørg for at kontaktene er fri for støv og rusk.

5. Feilsøking

If you encounter issues with your Donner Revecho pedal, refer to the following common problems and solutions:

• Ingen lyd:
  • Ensure the power adapter is correctly connected and providing the specified 9V DC, center-negative power.
  • Sjekk alle instrumentkabler for riktig tilkobling og funksjonalitet.
  • Verify that the pedal is engaged (LEDs are lit) and the LEVEL knob is not set to minimum.
• Svak eller forvrengt signal:
  • Check the power supply; insufficient current (below 100mA) can cause performance issues.
  • Ensure all cables are in good condition and fully inserted.
  • Adjust the LEVEL knob to an appropriate setting.
• Delay/Reverb Not Functioning:
  • Confirm that the respective effect is engaged via its footswitch.
  • Check the REVERB, DECAY, FEEDBACK, and DELAY knobs to ensure they are not set to minimum or extreme settings that might make the effect imperceptible.

6. Spesifikasjoner

7. Garanti og støtte

Garantiinformasjon:

This Donner product is covered by a 2 års garanti fra kjøpsdatoen. Vennligst ta vare på kjøpsbeviset for garantikrav.

Kundestøtte:

For further assistance, technical support, or warranty inquiries, please visit the official Donner webnettstedet eller kontakt kundeserviceavdelingen deres. Kontaktinformasjonen finner du vanligvis på produktemballasjen eller i produsentens webnettstedet.