Legrand Cariva Model 773611 White Double Pole Light Switch Instruction Manual

1. Overview

This manual provides essential information for the safe installation, operation, and maintenance of your Legrand Cariva Model 773611 White Double Pole Light Switch. This switch is designed for ON-OFF control of electrical circuits, featuring a double pole configuration and screw terminals for secure wiring. It is constructed from durable plastic and is suitable for various indoor electrical applications.

Dette bildet viser fronten view of the Legrand Cariva White Light Switch, highlighting its white plastic finish and button design.

2. Sikkerhetsinformasjon

• Elektrisk fare: Installation must be performed by a qualified electrician or competent person in accordance with all local and national electrical codes.
• Koble fra strømmen: Always turn off power at the circuit breaker or fuse box before installing, servicing, or removing the switch. Verify power is off using a voltage tester.
• Voltage vurdering: Ikke overskrid det angitte voltage-klassifisering på 250V.
• Kun innendørs bruk: This switch is intended for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
• Riktig ledning: Ensure all wire connections are secure and correctly terminated to prevent electrical shorts or hazards.

3. Pakkens innhold

Kontroller at alle komponenter er til stede før installasjonen starter:

• 1 x Legrand Cariva Model 773611 White Double Pole Light Switch

4. Oppsett (Installasjon)

1. Slå av strømmen: Locate the circuit breaker or fuse that controls the power to the switch location. Turn it OFF. Confirm power is off with a voltage tester.
2. Fjern gammel bryter (hvis aktuelt): Fjern forsiktig veggplaten og skru den gamle bryteren ut av koblingsboksen. Koble fra ledningene, og legg merke til tilkoblingene.
3. Forbered ledninger: Strip approximately 1/2 inch (12-15mm) of insulation from the ends of the electrical wires if necessary.
4. Koble til ledninger: The Legrand Cariva 773611 is a double pole switch. Connect the incoming live (hot) wires to the designated input terminals and the outgoing load wires to the designated output terminals. Ensure all screw terminals are tightened securely to prevent loose connections. A double pole switch typically controls two separate circuits or provides a full disconnection of both live and neutral for a single circuit (though this model specifies 'Normally Open' connection type, which implies it's a simple ON-OFF for a circuit). Consult a qualified electrician if unsure about wiring configurations.
5. Monter bryteren: Gently fold the wires into the electrical box. Secure the new switch to the electrical box using the provided screws.
6. Installer veggplate: Fest den dekorative veggplaten over bryteren.
7. Gjenopprett kraften: Slå PÅ strømmen igjen ved sikringsskapet eller strømbryteren.
8. Testoperasjon: Test bryteren for å sikre at den fungerer som den skal.

5. Bruksanvisning

The Legrand Cariva Model 773611 switch operates with a simple ON-OFF mechanism.

• Å skru på: Press the switch button to the 'ON' position.
• Å skru av: Press the switch button to the 'OFF' position.

6. Vedlikehold

• Rengjøring: To clean the switch, ensure power is OFF at the circuit breaker. Wipe the surface with a soft, damp klut. Ikke bruk skurende rengjøringsmidler eller løsemidler.
• Undersøkelse: Periodically inspect the switch for any signs of damage, loose connections, or discoloration. If any issues are observed, turn off power and consult a qualified electrician.

7. Feilsøking

Hvis feilsøkingstrinnene ikke løser problemet, kontakt en kvalifisert elektriker.

8. Spesifikasjoner

9. Garanti og støtte

Legrand products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation provided with your purchase or visit the official Legrand website. For technical support or assistance, please contact Legrand customer service through their official channels.

Webnettsted: www.legrand.com