BYGD 300W Car Power Inverter User Manual

1. Produktet er overview

The BYGD 300W Car Power Inverter converts 12V DC vehicle power to 110V AC household power. It features dual AC outlets and four USB quick charging ports, providing a versatile power solution for various electronic devices on the go. This unit is designed for portability and includes multiple safety protections.

Pakkeinnhold:

1 x BYGD 300W Power Inverter
1 x Cigarette Lighter Plug Cable
2 x Alligator Battery Clips
2 x 30A External Fuses
1 x brukerhåndbok

BYGD 300W Car Power Inverter with included accessories — Image 1: The BYGD 300W Car Power Inverter shown with its dual AC outlets, four USB ports, ON/OFF switch, and included cigarette lighter cable and battery clamps.

2. Viktig sikkerhetsinformasjon

Les og forstå alle sikkerhetsinstruksjoner før du bruker omformeren. Unnlatelse av å følge disse instruksjonene kan føre til elektrisk støt, brann eller alvorlig skade.

Inngang Voltage: Do not connect the inverter to power sources exceeding 12V DC. Connecting to 24V or 48V systems will damage the unit.
Strømbegrensninger: For devices exceeding 150W, connect the inverter directly to the vehicle battery using the provided alligator clips. Do not use the cigarette lighter plug for loads above 150W.
Kjøretøyets drift: Ensure the inverter's ON/OFF switch is in the "OFF" position when leaving the vehicle to prevent battery drain.
Ventilasjon: Sørg for tilstrekkelig ventilasjon rundt omformeren. Ikke blokker kjøleventilene.
Miljø: Avoid exposing the inverter to water, rain, or excessive moisture. Do not operate in flammable environments.
Endringer: Do not attempt to open or modify the inverter. Servicing should only be performed by qualified personnel.

3. Produktfunksjoner

Strømutgang: Provides 300W continuous power and 600W peak power.
Utgangsporter: Equipped with two US standard 110V AC outlets and four 2.4A USB quick charging ports.
Inndataalternativer: Connects to vehicle's 12V DC power via cigarette lighter plug or directly to battery terminals using alligator clips.
Sikkerhetsbeskyttelse: Built-in multi-protection system guards against over voltage, lav voltage, overload, short circuit, over heat, and over charge.
Kjølesystem: Features an intelligent, silent automatic control cooling fan for efficient heat dissipation.
Slitesterk konstruksjon: Made from ABS fireproof material for enhanced safety and durability.
Kompakt design: Measures 6.5 x 4.5 x 2.5 inches and weighs 1.2 lbs (550g) for portability.

BYGD 300W Car Power Inverter Multi-Protection features — Image 2: Visual representation of the inverter's multi-protection features, including over voltage, overload, low voltage, overheating, and short circuit protection.

BYGD 300W Car Power Inverter front and rear view med merkede komponenter — Bilde 3: Detaljert views of the inverter's front panel showing AC outlets, USB ports, power indicator, and ON/OFF switch, and the rear panel with positive and negative pole terminals, removable fuse, and cooling fan.

4. Installasjonsinstruksjoner

The BYGD 300W Car Power Inverter offers two connection methods:

4.1. Cigarette Lighter Connection (Up to 150W)

Ensure the inverter's ON/OFF switch is in the "OFF" position.
Insert the cigarette lighter plug cable firmly into the inverter's DC input port.
Plug the other end of the cigarette lighter cable into your vehicle's 12V cigarette lighter socket.
Proceed to Section 5: Operating Instructions.

Note: This connection method is suitable for devices consuming up to 150W. For higher power devices, use the battery clamp forbindelse.

4.2. Batteri Clamp Connection (Up to 300W)

Ensure the inverter's ON/OFF switch is in the "OFF" position.
Connect the red alligator clip to the inverter's positive (+) terminal and the black alligator clip to the negative (-) terminal. Ensure connections are secure.
Connect the red alligator clip to the positive (+) terminal of your vehicle's 12V battery.
Connect the black alligator clip to the negative (-) terminal of your vehicle's 12V battery.
Proceed to Section 5: Operating Instructions.

Forsiktighet: Always connect the inverter to the battery before turning it on. Ensure correct polarity (red to positive, black to negative) to prevent damage.

BYGD 300W Car Power Inverter with dimensions and connection cables — Image 4: The inverter's dimensions are shown, along with the cigarette lighter cable and alligator battery clamps for different connection modes.

5. Bruksanvisning

After connecting the inverter to the 12V DC power source (cigarette lighter or battery), press the "ON/OFF" switch on the inverter to the "ON" position.
The green "POWER" indicator light will illuminate, indicating the inverter is operational.
Plug your AC devices into the 110V AC outlets or your USB devices into the USB charging ports.
Sørg for at det totale strømforbruket til alle tilkoblede enheter ikke overstiger 300 W.
When finished, turn the inverter's "ON/OFF" switch to the "OFF" position and disconnect it from the power source.

Viktig: Some devices, especially those with motors or heating elements, may have a higher startup (peak) wattage than their continuous wattage. Ensure the device's peak wattage does not exceed the inverter's 600W peak capacity.

BYGD 300W Car Power Inverter showing compatible and incompatible devices — Image 5: Illustrates a wide range of compatible devices such as phones, tablets, TVs, shavers, computers, notebooks, and cameras. It also indicates incompatible high-power appliances like hair dryers, electric pans, coffee makers, and microwaves.

BYGD 300W Car Power Inverter in various usage scenarios — Bilde 6: Eks.amples of the inverter's application, including use during long journeys, camping, for in-car entertainment, and charging office items.

BYGD 300W Car Power Inverter in use inside a car — Image 7: The inverter positioned in a vehicle's center console, demonstrating its compact size and ease of access for charging devices.

6. Vedlikehold

Rengjøring: Periodically clean the exterior of the inverter with a dry, soft cloth. Do not use liquid cleaners.
Ventilasjon: Ensure the cooling fan and vents are free from dust and debris to maintain proper airflow.
Bytte sikring: The inverter includes two external 30A fuses. If the inverter stops working and the "FAULT" indicator is lit, check and replace the fuses if necessary. Always use fuses of the same type and rating (30A).
Lagring: When not in use, store the inverter in a cool, dry place away from direct sunlight and moisture.

7. Feilsøking

Problem	Mulig årsak	Løsning
No power output, Power indicator OFF.	Inverter switch is OFF. Loose connection to 12V source. Sikringen i sigarettenneren i bilen er gått. Inverter's internal/external fuse blown.	Turn inverter switch to "ON". Kontroller og sikre alle tilkoblinger. Replace vehicle's cigarette lighter fuse. Replace inverter's external 30A fuses.
Inverter shuts down, Fault indicator ON.	Overload (device wattage for høyt). Overheating (poor ventilation). Short circuit in connected device.	Reduce load; ensure total wattage er under 300 W. Ensure vents are clear; allow inverter to cool. Disconnect device; check for faults.
Audible alarm (beeping).	Lav inngangsvoltage (vehicle battery low). Høy input voltage.	Start vehicle engine to recharge battery. Ensure input is 12V DC only.

8. Spesifikasjoner

Modell	BYGD A300W
Inngang Voltage	DC 12V
Utgang Voltage	AC 110V
Kontinuerlig kraft	300W
Peak Power	600W
USB-utgang	4 x 2.4A (Quick Charging)
Dimensjoner (L x B x H)	6.5 x 4.5 x 2.5 tommer
Vekt	1.2 kg (550 g)
Materiale	ABS brannsikker

9. Garanti og støtte

The BYGD 300W Car Power Inverter is covered by an 18 måneders garanti fra kjøpsdatoen. Denne garantien dekker produksjonsfeil og utførelse ved normal bruk.

For technical support, warranty claims, or any questions regarding your product, please contact BYGD customer service. Refer to the contact information provided in your product packaging or visit the official BYGD webnettsted for hjelp.

BYGD BYGD A300W