BS Battery BSLi-03

BS-batteri BSLi-03 litiumbatteri brukerhåndbok

1. Introduksjon

This manual provides essential information for the safe and effective use of your BS Battery BSLi-03 Lithium Battery. Designed for high performance and durability, this lithium-ion battery offers significant advantages over traditional lead-acid batteries, including reduced weight, extended service life, and improved cold-start performance. Please read this manual thoroughly before installation and operation.

BS Battery BSLi-03 Lithium Battery

Figur 1: The BS Battery BSLi-03 Lithium Battery, showcasing its compact design and terminal layout.

2. Sikkerhetsinformasjon

Your safety is paramount. Observe the following precautions to prevent injury or damage to the battery and equipment.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling batteries.
  • Do not short-circuit the battery terminals. This can cause severe sparks, heat, and potential fire.
  • Do not disassemble, puncture, or modify the battery. Internal components are hazardous.
  • Keep the battery away from open flames, excessive heat, and direct sunlight.
  • Unngå å miste batteriet eller utsette det for harde støt.
  • Hvis batteriet casing is damaged, discontinue use immediately and dispose of it properly.
  • Do not immerse the battery in water or other liquids. While waterproof, prolonged submersion is not recommended.
  • Dispose of spent batteries according to local regulations. Lithium batteries require special recycling procedures.
  • Advarsel for forslag 65: Dette produktet kan inneholde kjemikalier som er kjent i staten California for å forårsake kreft og fødselsskader eller annen reproduksjonsskade.

3. Produktfunksjoner

The BS Battery BSLi-03 Lithium Battery incorporates advanced technology for superior performance:

  • Lett design: Up to 70% lighter than traditional lead-acid batteries, improving vehicle handling and performance.
  • Forlenget levetid: Offers a significantly longer lifespan and over 2000 charge cycles.
  • Lav selvutladning: Maintains charge for extended periods, allowing for engine starts even after long periods of inactivity.
  • Rask lading: Capable of rapid recharging.
  • Multi-Position Waterproof Design: Can be installed in various orientations (up to 180°) and is resistant to water ingress.
  • Miljøvennlig: Contains no acids or heavy metals, making it non-toxic and environmentally conscious.
  • Høy varmebestandighet: Motstandsdyktig mot temperaturer opptil 230 °C.
  • Klar til bruk: Plug and play functionality for immediate operation.
  • Impressive Low Temperature Performance: Reliable starting power even in cold conditions.
  • Indikator for ladetilstand: Integrated button and LED display to check battery charge level.
BSLi-03 Lithium Battery Features

Figur 2: Visual representation of key features including rapid charging, lightweight, waterproof, and high charge cycles.

4. Oppsett og installasjon

Follow these steps for proper installation of your BSLi-03 Lithium Battery. If you are unsure, consult a qualified technician.

  1. Fjern det gamle batteriet: Disconnect the negative (-) terminal first, then the positive (+) terminal of the old battery. Carefully remove the old battery from its compartment.
  2. Klargjør nytt batteri: Ensure the BSLi-03 battery is clean and free from debris. No liquid filling is required as it is a sealed lithium battery.
  3. Installer nytt batteri: Place the BSLi-03 into the battery compartment. Secure it firmly to prevent movement during operation.
  4. Koble til terminaler: Connect the positive (+) terminal first, then the negative (-) terminal. Ensure all connections are tight and secure.
  5. Bekreft installasjon: Double-check all connections and ensure the battery is properly seated.
Metode for batteriskifting

Figur 3: Step-by-step visual guide for battery replacement, emphasizing correct terminal connection order.

5. Bruksanvisning

The BSLi-03 Lithium Battery is designed for straightforward operation.

  • Starte motoren: Once installed, the battery is ready to provide power for engine starting.
  • Checking State of Charge: Press the integrated button on the battery to activate the LED indicator, which displays the current charge level.
BSLi-03 Battery with State of Charge Indicator

Figur 4: The BSLi-03 battery showing its dimensions and the location of the state of charge indicator button.

6. Vedlikehold

Minimal maintenance is required for the BSLi-03 Lithium Battery due to its advanced design.

  • Regelmessig inspeksjon: Periodically check the battery terminals for corrosion and ensure connections remain tight.
  • Rengjøring: Keep the battery surface clean and dry. Use a damp klut om nødvendig.
  • Lader: While the battery has a low self-discharge rate, if the vehicle is stored for extended periods, occasional charging with a compatible lithium battery charger is recommended to maintain optimal performance. Do not use chargers designed for lead-acid batteries unless they have a specific lithium mode.
  • Langtidslagring: For optimal longevity, store the battery in a cool, dry place. The battery can maintain a charge for up to 12 months without use, allowing for engine start if stored at appropriate temperatures (10-25°C).

7. Feilsøking

If you encounter issues with your BSLi-03 Lithium Battery, consider the following:

  • Motoren starter ikke:
    • Sjekk batterikoblingene for tetthet og korrosjon.
    • Verify the battery's state of charge using the indicator button. If low, recharge the battery.
    • Ensure the vehicle's charging system is functioning correctly.
  • Batteri holder ikke ladning:
    • Confirm you are using a compatible lithium battery charger.
    • Inspect for any parasitic drains on the vehicle's electrical system.
    • If the battery is old, its capacity may have naturally diminished over time.
  • Unusual Odor or Swelling: Immediately disconnect the battery and cease use. This indicates a serious internal issue. Contact support for guidance.

Hvis feilsøkingstrinnene ikke løser problemet, kontakt kundestøtte.

8. Spesifikasjoner

Key technical specifications for the BS Battery BSLi-03 Lithium Battery:

SpesifikasjonVerdi
ModellnummerBSLi-03
Voltage12V
Capacity (WH)36 Wh
CCA (kald sveiving Amps)210 A
Capacity (Ah, 10Hr)3 Ah
Dimensjoner (L x B x H)134 mm x 65 mm x 92 mm
Varevekt2.2 pund (ca. 1 kg)
Terminal TypeMutter bolt
Produsentens delenummerBSLi-03/HJB9Q-FP/12N9-4B-1
BSLi-03 Specifications Table

Figur 5: Detailed specifications and compatibility chart for the BSLi-03 battery.

9. Garanti og støtte

Your BS Battery BSLi-03 Lithium Battery comes with a comprehensive warranty to ensure your peace of mind.

  • Garantiperiode: The BSLi-03 Lithium Battery is covered by a 2 års garanti fra kjøpsdatoen. Denne garantien dekker defekter i materialer og utførelse ved normal bruk.
  • Gjør krav på garanti: In the event of a warranty claim, please retain your proof of purchase and contact the retailer or BS Battery customer support.
  • Ekskluderinger: The warranty does not cover damage caused by improper installation, misuse, neglect, unauthorized modifications, or normal wear and tear.
BSLi-03 Warranty and Longevity Information

Figur 6: Information highlighting the 2-year warranty, flexible mounting angle, and potential lifespan of up to 8 years with proper use.

For further assistance or technical support, please refer to the contact information provided by your retailer or visit the official BS Battery webnettstedet.

Relaterte dokumenter - BSLi-03

Preview FMI Rear Lower Link Frame Skids Installation Guide for 2021+ Ford Raptor Gen 3
Detailed installation instructions for FMI Rear Lower Link Frame Skids, designed to protect the lower link mounts on the 2021 and newer Ford Raptor Gen 3. Includes kit contents, required tools, and step-by-step guidance.
Preview FMI Racing 3. generasjons Raptor støtdempersett monteringsanvisning (2021-og-over)
Detaljert monteringsveiledning for FMI Racing 3. generasjons Raptor støtdempersett for 2021 og nyere Ford Raptor-modeller. Inkluderer deleliste, nødvendige verktøy, demonteringstrinn og monteringsprosedyrer.
Preview BS Battery SLA- og SLA MAX-batterier: Bruksanvisning og vedlikeholdsveiledning
Omfattende veiledning for BS Battery SLA- og SLA MAX-seriebatterier. Lær om sikker bruk, installasjon, lading og vedlikehold av dine fabrikkaktiverte, forseglede vedlikeholdsfrie batterier.
Preview Flycolor Raptor 5-serien ESC brukerhåndbok
Brukerhåndbok for Flycolor Raptor 5-serien med elektroniske hastighetskontrollere (ESC-er), med detaljer om funksjoner, spesifikasjoner, kabling, programmeringsparametere og driftsveiledning for applikasjoner med flere rotorer.
Preview Flycolor Raptor 5-serien børsteløs ESC brukerhåndbok
Omfattende brukermanual for Flycolor Raptor 5-serien med børsteløse elektroniske hastighetskontrollere (ESC-er), med detaljer om funksjoner, spesifikasjoner, kabling, programmeringsparametere og driftsretningslinjer for fly med flere rotorer.
Preview Addictive Desert Designs Phantom Front Bumper Installation Guide for 22+ Ford Raptor
Comprehensive installation guide for the Addictive Desert Designs Phantom Front Bumper, designed for the 2022+ Ford Raptor. This guide covers preparation, removal of the stock bumper, installation of the new bumper, and final checks, detailing all necessary tools and hardware.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.