BS Battery High Performance Lithium Battery

Brukerhåndbok for BS Battery høyytelses litiumbatteri

Model: High Performance Lithium Battery (BSLi-04/BSLi-06)

Produkt overview

The BS Battery High Performance Lithium Battery is designed for superior power and longevity in various applications, particularly for motorcycles and powersports vehicles. This advanced lithium battery offers significant advantages over traditional lead-acid batteries, including lighter weight, enhanced performance, and extended durability.

  • Klar til bruk: No initial preparation required.
  • Lett design: Significantly lighter than traditional lead electrolyte batteries.
  • Fleksibel montering: Can be mounted at up to 180 degrees, offering versatile installation options.
  • Rask lading: Efficiently recharges, reducing downtime.
  • Lav selvutladning: Maintains charge for extended periods, allowing for engine starts even after long storage.
  • Impressive Cold Cranking Performance: Reliable starting power in cold conditions.
  • Høy varmebestandighet: Withstands temperatures up to 446°F (230°C).
  • Robust Terminals: Features durable brass terminals for optimal electrical conductivity.
  • Vanntett Design: Ensures reliability in various environmental conditions.

Viktig sikkerhetsinformasjon

ADVARSEL: Assembly and use of this product must be entrusted to a person with the necessary assistance and expertise. Improper handling or installation can lead to serious injury or damage. Always follow all safety guidelines and local regulations.

  • Bruk alltid passende personlig verneutstyr (PPE) som vernebriller og hansker når du håndterer batterier.
  • Ikke kortslutt batteripolene.
  • Keep the battery away from open flames, sparks, and excessive heat.
  • Ikke demonter, punkter eller ødelegg batteriet.
  • Kast batterier i henhold til lokale forskrifter.

Oppsett og installasjon

The BS Battery Lithium Battery is designed for straightforward installation. Ensure your vehicle's ignition is off and the negative terminal of the existing battery is disconnected first.

  1. Preparat: Ensure the battery compartment is clean and free of debris. Verify that the battery dimensions (5.28"D x 2.56"W x 3.62"H) are compatible with your vehicle's battery tray.
  2. Plassering: Place the new BS Battery Lithium Battery into the battery compartment. Its design allows for mounting at various angles (up to 180 degrees) to fit different vehicle configurations.
  3. Koble til terminaler: Connect the positive (+) terminal of the battery first, then the negative (-) terminal. Use the robust brass terminals provided, ensuring a secure and tight connection.
  4. Securing the Battery: Use appropriate straps or clamps to secure the battery firmly in place to prevent movement during operation.
  5. Initial Charge (if needed): While the battery is "Ready to use," if it has been stored for an extended period, a brief charge with a compatible lithium battery charger is recommended to ensure optimal performance.
BS Battery High Performance Lithium Battery with brass terminals and state of charge indicator

Image: The BS Battery High Performance Lithium Battery, showing its compact design, red top casing, gray body, and robust brass terminals. A "STATE OF CHARGE" indicator is visible on the top surface.

Bruksanvisning

Once installed, the BS Battery Lithium Battery operates like a standard vehicle battery, providing power for starting and electrical systems. Its advanced features enhance the user experience.

  • Motorstart: The battery provides impressive cold cranking performance, ensuring reliable engine starts even in low temperatures.
  • Indikator for ladetilstand: The battery features a "STATE OF CHARGE" indicator on its top surface. Press the "TEST" button to check the current charge level. This helps in monitoring battery health.
  • Lagring: Due to its very low self-discharge rate, the battery can be stored for long periods without significant loss of charge, allowing the engine to start even after extended storage.
  • Lader: If charging is required, use a charger specifically designed for lithium (LiFePO4) batteries. The battery supports fast charging.

Vedlikehold

Proper maintenance ensures the longevity and optimal performance of your BS Battery Lithium Battery.

  • Terminalrengjøring: Periodically inspect and clean the brass terminals to prevent corrosion and ensure good electrical contact. Use a wire brush and a battery terminal cleaner if necessary.
  • Tilkoblingssjekk: Ensure all connections to the battery terminals are tight and secure. Loose connections can lead to power loss and heat buildup.
  • Charging During Long Storage: While the battery has a low self-discharge rate, for very long periods of inactivity (several months), it is advisable to connect it to a compatible lithium battery maintainer to keep it at an optimal charge level.
  • Miljøforhold: Although waterproof and heat-resistant, avoid exposing the battery to extreme conditions beyond its specified operating range for prolonged periods.

Feilsøking

If you encounter issues with your BS Battery Lithium Battery, consider the following common troubleshooting steps:

  • Engine Not Cranking or Cranking Slowly:
    • Check the battery terminals for corrosion or loose connections. Clean and tighten as necessary.
    • Verify the battery's state of charge using the built-in indicator. If low, charge the battery with a compatible lithium charger.
    • Ensure the vehicle's charging system (alternator/stator) is functioning correctly.
  • Batteri holder ikke ladning:
    • Confirm that the charger used is specifically designed for LiFePO4 batteries.
    • Check for parasitic drains in the vehicle's electrical system that might be discharging the battery when the vehicle is off.
    • Ensure the battery is not exposed to extreme temperatures that could affect its performance.
  • Indikatorlampen fungerer ikke:
    • Ensure the battery has some charge. The indicator may not function if the battery is completely depleted.
    • If the battery is charged and the indicator still doesn't work, contact support.

If these steps do not resolve the issue, consult a qualified technician or contact customer support.

Spesifikasjoner

TrekkDetalj
MerkeBS Battery
ModellHigh Performance Lithium Battery (BSLi-04/BSLi-06)
OEM delenummerBSLi-04/BSLi06 / HJTZ10S-FP
Produsentens delenummer360104
Dimensjoner (D x B x H)5.28"D x 2.56"W x 3.62"H (134 x 65 x 92 millimeters)
Varevekt2.65 pund
Antall celler4
Voltage12V
Energikapasitet48Wh
Kald sveiving Amps (CCA)280A
Spesielle funksjonerElectric, Waterproof, High Heat Resistance (up to 446°F)
Tilgjengelighetsvarighet for reservedeler i EU10 år

Garantiinformasjon

Specific warranty terms and conditions for the BS Battery High Performance Lithium Battery are provided by the manufacturer, BS Battery, or the authorized seller at the time of purchase. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation included with your product or visit the official BS Battery webnettstedet.

Kundestøtte

For technical assistance, product inquiries, or support regarding your BS Battery High Performance Lithium Battery, please contact the seller from whom you purchased the product. Alternatively, you may visit the official BS Battery webnettsted for kontaktinformasjon og ytterligere ressurser.

Produsent: BS Battery

ASIN: B07N5CKT92

© 2024 BS Battery. All rights reserved.

Denne håndboken er kun til informasjonsformål. Spesifikasjonene kan endres uten varsel.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.