A. O. Smith AO-US-200

A. O. Smith AO-US-200 2-Stage Under vask vannfiltersystem

Bruksanvisning

Introduksjon

This manual provides comprehensive instructions for the installation, operation, and maintenance of your A. O. Smith AO-US-200 2-Stage Under Sink Water Filter System. Please read all instructions carefully before beginning installation or use to ensure proper function and safety. This system is designed to provide clean, filtered drinking water directly from a dedicated faucet.

Viktig sikkerhetsinformasjon

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of fire, electric shock, or injury to persons. Keep this manual for future reference.

  • Slå av hovedvanntilførselen før installasjon.
  • Do not install the system where it will be exposed to freezing temperatures.
  • Sørg for at alle tilkoblinger er sikre for å forhindre lekkasjer.
  • Use only genuine A. O. Smith replacement filters.

Hva er i esken

Kontroller at alle komponenter er til stede før installasjonen starter:

  • AO-US-200 Filter Unit
  • Kran
  • Filter Cartridge Set (2 cartridges)
  • Skiftenøkkel
  • Slange
  • 1/4" Brass Tee
  • Mounting Screws with Anchors
  • Faucet Installation Hardware (spacers, nuts, washers)
Diagram showing all components included in the AO Smith AO-US-200 water filter system box: filter unit, faucet, two filter cartridges, and a wrench.
Figure 1: Included Components of the AO-US-200 System

Spesifikasjoner

Trekk Detalj
Modellnummer AO-US-200
Filtrering Stages 2-Stage Claryum Filtration
Filterliv 6 months / 500 Gallons
Forurensningsreduksjon Reduces up to 99% of 78 contaminants including Lead, PFAS, Chlorine, Mercury, Asbestos, Pharmaceuticals, Chloramine
Sertifiseringer NSF/ANSI Standards 42, 53, and 401 (WQA Tested & Certified)
Strømningshastighet 0.5 liter per minutt
Materiale Karbonblokk
Dimensjoner (ca.) Høyde: 9 tommer (22.9 cm), bredde: 8.25 cm, dybde: 21 cm
Diagram showing the dimensions of the AO Smith 2-stage water filter system, including height, width, and depth measurements.
Figure 2: System Dimensions

Oppsett og installasjon

1. Sjekkliste før installasjon

  • Nødvendig verktøy: Adjustable wrench, measuring tape, pencil, Phillips head screwdriver, hammer, variable speed drill with 7/32" bit, level.
  • Sted: Select a space under your sink that is at least 12 inches from the bottom of your cabinet and allows for easy access to a cold water supply line.
  • Faucet Placement: The dedicated faucet may be mounted on the sink using an existing hole (e.g., for a sprayer nozzle or soap dispenser) or by drilling a new hole no more than 1/2 inch in diameter. Ensure the faucet's spout extends slightly past the edge of the sink. Merk: Vi anbefaler å bruke en godkjent eller sertifisert fagperson hvis boring er nødvendig.

2. Connecting to Cold Water Supply

  1. Slå av kaldtvannstilførselen til vasken.
  2. Disconnect the cold water supply line from the shut-off valve.
  3. Attach the threaded end of the 1/4" brass tee to the cold water shut-off valve.
  4. Connect the cold water supply line to the top of the brass tee.
  5. Tighten all connections using an adjustable wrench.

3. Installasjon av kran

  1. Insert the faucet stem through the chosen hole in your sink.
  2. From underneath the sink, slide the faucet rubber washer, faucet washer, and faucet spacer onto the faucet stem.
  3. Secure the faucet with the faucet nut, tightening it with a wrench to ensure it is secure to the sink.

4. Mounting the Filter Unit

  1. Temporarily position the filter unit under the sink in your chosen location.
  2. Merk monteringshullene med en blyant.
  3. Drill pilot holes at the marked locations. If mounting into drywall, insert the provided drywall anchors.
  4. Mount the unit to the wall using the provided screws.
Diagram illustrating the DIY installation process for an under-sink water filter system, showing connections to the cold water line and faucet.
Figure 3: Do-It-Yourself Installation Overview
An under-counter view of the installed AO Smith water filtration system, showing the filter unit and associated plumbing beneath a kitchen sink.
Figure 4: Under-Counter Installation Example

5. Koble til rør

  1. Connect one end of the provided tubing to the open port on the brass tee. Ensure the plastic tube insert and brass nut are correctly installed for a secure, leak-free connection.
  2. Insert the other end of this tubing completely into the 'IN' port of the filter unit.
  3. Connect another piece of tubing to the faucet stem. Ensure the chrome nut and plastic collar are correctly installed.
  4. Insert the other end of this tubing completely into the 'OUT' port of the filter unit.

6. Initial System Flush

  1. Skru sakte på kaldtvannstilførselen.
  2. Open the dedicated filtered water faucet and allow water to run for 10 minutes to flush the system. This removes air and carbon fines.
  3. Check all connections for leaks. Tighten if necessary.

Video 1: Official A. O. Smith AO-US-200 Installation Guide. This video provides a visual walkthrough of the installation process for the 2-stage under sink water filter system.

Betjene systemet ditt

Once installed and flushed, your A. O. Smith AO-US-200 system is ready for use. Simply open the dedicated filtered water faucet to dispense clean, filtered water. The system filters water at a rate of 0.5 gallons per minute, suitable for families of 1 to 4 people.

Maintenance: Filter Replacement

For optimal performance, replace your filter cartridges every 6 months or after 500 gallons of use, whichever comes first. The system is designed for easy, tool-free filter replacement.

Filtreringsteknologi

Diagram illustrating how the 2-stage Claryum filtration system works, showing water flowing through two filter cartridges.
Figure 5: How the 2-Stage Claryum Filtration Works
Diagram detailing the Claryum filtration technology, showing activated carbon, catalytic carbon, ion-exchange, and absolute sub-micron mechanical filtration layers.
Figure 6: Claryum Filtration Technology Details

Trinn for utskifting av filter

  1. Turn off the cold water supply to the system.
  2. Open the filtered water faucet to relieve pressure and drain any remaining water.
  3. Twist the old filter cartridges counter-clockwise to remove them from the unit housing.
  4. Discard the old filters.
  5. Insert new filter cartridges into the unit housing, aligning the connection points.
  6. Push the new filters up and twist clockwise until they are securely locked into place.
  7. Skru sakte på kaldtvannstilførselen.
  8. Open the filtered water faucet and allow water to run for 10 minutes to flush the new filters.
  9. Se etter eventuelle lekkasjer.
Pro tips for easy installation and filter replacement, including advice on not over-tightening sumps, inserting tubing completely, wetting tube ends, and noting that the system does not reduce TDS.
Figure 7: Pro Tips for Installation and Filter Replacement

Feilsøking

Problem Mulig årsak Løsning
Lekkasjer ved tilkoblinger Loose fittings, missing O-rings, improper tubing insertion. Ensure all nuts are tightened, check for properly seated O-rings, re-insert tubing fully into quick-connect fittings. Using plumber's tape on threaded connections can help.
Lav vannstrøm fra kranen Clogged filters, kinked tubing, low incoming water pressure. Replace filters if they are past their service life. Check tubing for kinks. Verify adequate household water pressure.
Unpleasant taste/odor Filters are exhausted, initial carbon fines not fully flushed. Replace filters. Flush the system for an extended period (e.g., 15-20 minutes) after filter replacement.
Filter change indicator not working Batteriet må byttes. Replace the battery in the filter unit's indicator.

Garantiinformasjon

A. O. Smith provides a limited warranty for this product. Please refer to the warranty card included with your purchase or visit the official A. O. Smith webnettstedet for detaljerte vilkår og betingelser. Ta vare på kjøpsbeviset for garantikrav.

Kundestøtte

If you have any questions, require assistance with installation, or need to order replacement parts, please contact A. O. Smith Customer Support:

  • Webnettsted: www.aosmith.com
  • Telefon: Refer to your product packaging or the A. O. Smith webnettsted for de nyeste kontaktnumrene.

© 2024 A. O. Smith. All rights reserved.