Introduksjon
Takk for kjøpetasing the VONYX AM8A 8-Channel Mixer Amplifier. This integrated mixer and amplifier unit is designed for professional sound reinforcement applications, offering 8 input channels, a powerful 1000W amplifier, Bluetooth connectivity, MP3/USB/SD playback, and 16 digital effects. Please read this manual thoroughly to understand the product's features and ensure safe and optimal operation.
Sikkerhetsinstruksjoner
- Strømforsyning: Koble enheten kun til en jordet stikkontakt med angitt volum.tage (230Vac/50Hz). Ensure the power cord is not damaged or pinched.
- Fuktighet: Ikke utsett enheten for regn, fuktighet, drypp eller sprut av væske. Ikke plasser gjenstander fylt med væske oppå enheten.
- Ventilasjon: Ensure adequate ventilation. Do not block ventilation openings. Avoid placing the unit on soft surfaces that may obstruct airflow.
- Varme: Hold enheten unna varmekilder som radiatorer, varmeventiler, ovner eller andre apparater som produserer varme.
- Service: Ikke forsøk å utføre service på enheten selv. Overlat all service til kvalifisert servicepersonell.
- Rengjøring: Disconnect the unit from the power supply before cleaning. Use a dry cloth for cleaning.
- Plassering: Plasser enheten på en stabil, flat overflate for å hindre at den faller ned.
Produkt overview
The VONYX AM8A combines an 8-channel mixer with a powerful amplifier, offering versatile audio control and output capabilities. Key features include:
- Integrated 2x 500W (4 Ohm) / 2x 300W (8 Ohm) power amplivligere.
- Built-in MP3 player with USB and SD card slots.
- Bluetooth receiver for wireless audio streaming.
- +48V Phantom power for condenser microphones.
- 5-band graphic equalizer for main output.
- DSP with 16 digital effects.
- PFL (Pre-Fader Listen) function per channel.
- Multiple input options: XLR microphone, 6.3mm jack line, RCA line.
- Tone control (Hi/Low) per channel.
- Speaker outputs (6.3mm jack) and XLR line outputs.
Figur 1: Front view of the VONYX AM8A 8-Channel Mixer Amplifier, showing all input channels, controls, and the master section.
Figur 2: Close-up of the VONYX AM8A's graphic equalizer and master controls, including the DSP effects section.
Figur 3: Detail of the integrated MP3 player with USB and SD card slots, and Bluetooth functionality on the VONYX AM8A.
Oppsett
1. Pakker ut
Carefully remove the mixer amplifier from its packaging. Inspect the unit for any signs of damage during transit. Retain the original packaging for future transport or storage.
2. Strømtilkobling
- Ensure the power switch on the rear panel is in the OFF position.
- Connect the supplied power cable to the AC IN socket on the rear panel of the mixer amplivligere.
- Plug the other end of the power cable into a suitable grounded 230Vac/50Hz mains outlet.
3. Inngangstilkoblinger
The AM8A features 8 input channels, each with XLR microphone inputs and 6.3mm jack line inputs. Additional RCA inputs are available for stereo sources.
- Mikrofoner: Connect microphones to the XLR inputs (CH1-CH8). If using condenser microphones, activate the +48V Phantom Power switch (located near the master section) after all microphones are connected and before powering on.
- Linjenivåenheter: Connect instruments, keyboards, or other line-level devices to the 6.3mm jack inputs (CH1-CH8). For stereo sources, use the RCA inputs.
4. Utgangstilkoblinger
Connect your passive speakers and monitoring devices to the appropriate outputs.
- Høyttalere: Connect passive speakers to the 6.3mm jack SPEAKER OUTPUTS (LEFT and RIGHT) on the rear panel. Ensure the impedance of your speakers matches the amplifier's specifications (4-8 Ohm).
- Utvendig Amplifiers/Recording Devices: Use the XLR MAIN OUTPUTS (LEFT and RIGHT) to connect to external power ampløftere eller opptaksutstyr.
- Hodetelefoner: Plug headphones into the 6.3mm jack HEADPHONES output on the front panel for monitoring.
Figur 4: Rear panel of the VONYX AM8A, showing power input, main outputs, and speaker outputs.
Bruksanvisning
1. Slå på/av
- Before powering on, ensure all channel faders and the main fader are set to their minimum positions.
- Vri POWER-bryteren på bakpanelet til PÅ-posisjon.
- To power off, reverse the process: lower all faders, then switch off the unit.
2. Channel Controls (CH1-CH8)
- GEVINST: Adjusts the input sensitivity for each channel. Set this to achieve a strong signal without clipping (distortion).
- HI/LOW EQ: Tobånds equalizer for justering av høye og lave frekvenser for hver kanal.
- EFF: Controls the amount of signal sent to the internal DSP effects processor.
- PANNE: Adjusts the stereo position (left to right) of the channel's signal.
- PFL: (Pre-Fader Listen) Activates monitoring of the channel's signal through headphones, independent of the channel fader.
- KANALFADER: Controls the output level of each individual channel to the main mix.
3. Master Controls
- MAIN FADER (L+R): Controls the overall output volume of the mixer amplivligere.
- TELEFON: Justerer volumet på hodetelefonutgangen.
- GRAFISK EQUALIZER: A 5-band equalizer (70Hz, 250Hz, 1KHz, 4KHz, 12KHz) to fine-tune the overall frequency response of the main mix.
- DSP-EFFEKTER: Select from 16 digital effects using the 'UP' and 'DOWN' buttons. Adjust the 'EFF LEVEL' knob to control the wet/dry mix of the effects.
- +48V FANTOM: Activates phantom power for condenser microphones connected to the XLR inputs.
4. MP3/USB/SD Player & Bluetooth
The integrated media player supports USB drives and SD cards for MP3 playback, and also features Bluetooth connectivity.
- USB/SD-avspilling: Sett inn en USB-stasjon eller et SD-kort i det respektive sporet. Enheten vil automatisk oppdage og begynne å spille av kompatibel lyd. files. Use the transport controls (Play/Pause, Skip) to navigate.
- Bluetooth-sammenkobling: Activate Bluetooth on your mobile device. Select 'VONYX AM8A' from the list of available devices. Once paired, you can stream audio wirelessly to the mixer amplivligere.
- Modusvalg: Use the 'MODE' button to switch between USB, SD, and Bluetooth input sources.
Vedlikehold
- Rengjøring: Regularly clean the unit with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
- Ventilasjon: Ensure the ventilation grilles are free from dust and debris to maintain proper cooling.
- Lagring: When not in use for extended periods, store the unit in a cool, dry place, preferably in its original packaging, away from direct sunlight and extreme temperatures.
- Kabeladministrasjon: Keep cables organized and free from kinks or excessive bending to prevent damage.
Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Ingen strøm | Strømkabel frakoblet; Strømbryter av; Sikring utløst | Check power cable connection; Ensure power switch is ON; Replace fuse if necessary (refer to qualified technician). |
| Ingen lydutgang | Main fader down; Channel fader down; Speaker cables disconnected/faulty; Incorrect input selection; Ampbeskyttelsesmodus for sikringsskap | Raise main and channel faders; Check speaker connections; Verify input source; Power cycle the unit. |
| Forvrengt lyd | Input gain too high; Output level too high; Faulty cable/speaker | Reduce input GAIN; Lower main fader; Check all cables and speakers. |
| Mikrofonen virker ikke | Microphone not connected; Phantom power off (for condenser mics); Channel fader down; Faulty microphone/cable | Check microphone connection; Activate +48V Phantom Power; Raise channel fader; Test with another microphone/cable. |
| Bluetooth kobler ikke til | Bluetooth not enabled on device; Unit not in Bluetooth mode; Device too far | Ensure Bluetooth is active on your device; Press MODE button to select Bluetooth; Move device closer to the mixer. |
Spesifikasjoner
| Trekk | Spesifikasjon |
|---|---|
| Modellnummer | 172.574 |
| Power Output (4 Ohm) | 2x 500W |
| Power Output (8 Ohm) | 2x 300W |
| Frekvensområde | 20 Hz–20 kHz |
| THD (Total Harmonic Distortion) | <0.1 % |
| EQ Hei | ± 15 dB / 12 kHz |
| EQ Lo | ± 15 dB / 70 Hz |
| Linjeinngangsfølsomhet | +5dB ~ -40dB |
| Mikrofoninngangsfølsomhet | -15dB ~ -60dB |
| Utgangsnivå | +12 dB (3 V) |
| Hodetelefonutgang | 300mW @ 32 Ohm |
| Tilkobling Voltage | 230Vac / 50Hz |
| Dimensjoner (L x B x H) | 320 x 300 x 140 mm |
| Vekt | 12 kg |
| Antall kanaler | 8 |
| Tilkoblingsteknologi | USB, Bluetooth |
| Inngang lyd | XLR, RCA, 6.35mm Jack, USB |
| Type utgangskontakt | XLR, 6.35mm TRS |
Garanti og støtte
VONYX products are designed for reliability and performance. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your local VONYX dealer. For technical support or service inquiries, please visit the official VONYX webnettstedet eller kontakt deres kundeserviceavdeling.