1. Introduksjon
Thank you for choosing the PHILIPS Stellar Bright 16W LED Bulb. This manual provides essential information for the safe and efficient use of your new LED bulbs. These bulbs are designed for indoor use, offering cool daylight illumination with energy-efficient LED technology.
The image displays the PHILIPS Stellar Bright 16W LED Bulb alongside its retail packaging. The packaging highlights key features such as 82% energy saving and EyeComfort Technology. The bulb itself is a standard A-shape with a B22 base.
2. Sikkerhetsinformasjon
- Always turn off the power supply before installing, removing, or cleaning the bulb.
- Do not use if the bulb or its packaging appears damaged.
- Denne pæren er kun beregnet for innendørs bruk.
- Ikke forsøk å demontere eller modifisere pæren. Det er ingen deler inni som brukeren kan reparere.
- Ensure the bulb is securely screwed into the fixture to prevent accidental detachment.
- This bulb is non-dimmable. Do not use with dimmer switches, as this may cause damage or malfunction.
- Drift voltage is 220-240 volts. Ensure your fixture's voltage oppfyller dette kravet.
3. Oppsett og installasjon
3.1 Utpakking
Carefully remove the LED bulbs from their packaging. Inspect each bulb for any visible damage before installation.
3.2 Installasjonstrinn
- Slå av strømmen: Locate the light switch or circuit breaker controlling the fixture where the bulb will be installed and turn it off.
- Klargjør inventar: If replacing an old bulb, allow it to cool completely before carefully unscrewing it from the fixture.
- Installer ny pære: Gently screw the PHILIPS Stellar Bright 16W LED Bulb into the B22D base socket. Turn clockwise until it is snug, but do not overtighten.
- Gjenopprett kraften: Turn the power supply back on at the switch or circuit breaker.
Et nærbilde view of the PHILIPS Stellar Bright 16W LED Bulb, highlighting its standard A-shape and B22D bayonet cap base, ready for installation.
4. Bruksanvisning
Operating the PHILIPS Stellar Bright 16W LED Bulb is straightforward:
- Slå på/av: Use your standard wall switch to turn the light on or off.
- Ikke-dimbar: This LED bulb is designed to operate at full brightness only and is not compatible with dimmer switches. Using it with a dimmer may lead to flickering, reduced lifespan, or damage to the bulb.
This graphic illustrates the main benefits of the PHILIPS Stellar Bright 16W LED Bulb, including up to 82% energy saving, 16W power consumption, LED technology, and EyeComfort Technology for reduced eye strain.
5. Vedlikehold
The PHILIPS Stellar Bright 16W LED Bulb requires minimal maintenance:
- Rengjøring: Ensure the power is off and the bulb is cool before cleaning. Use a soft, dry, lint-free cloth to wipe the bulb. Do not use liquid or abrasive cleaners.
- Erstatning: When the bulb reaches the end of its operational life, replace it with a new PHILIPS Stellar Bright 16W LED Bulb or an equivalent LED bulb with a B22D base.
An image showing the PHILIPS Stellar Bright LED Bulb installed in a wall fixture, illuminating a modern living space with soft, eco-friendly light. The room features a sofa with cushions and a minimalist design.
6. Feilsøking
If you encounter issues with your PHILIPS Stellar Bright 16W LED Bulb, refer to the following common problems and solutions:
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Pæren lyser ikke | Ingen strøm til armaturet Pæren er ikke skrudd ordentlig inn Defekt pære Defekt armatur | Sjekk lysbryteren og sikringsbryteren. Ensure the bulb is securely tightened in the socket. Replace the bulb with a known working one. Have the fixture inspected by a qualified electrician. |
| Pæren flimrer | Used with a dimmer switch Løs forbindelse Voltage svingninger | Remove from dimmer circuit; this bulb is non-dimmable. Sørg for at pæren er godt strammet. Kontakt en elektriker hvis volumtagproblemene vedvarer. |
| Light output is low | Feil pære wattage for desired brightness Dust or dirt on bulb/fixture | Ensure the 16W bulb meets your brightness requirements. Clean the bulb and fixture as per maintenance instructions. |
The PHILIPS Stellar Bright LED Bulb is shown installed in an outdoor fixture, casting bright, high-quality light over the entrance of a building, demonstrating its suitability for various lighting needs.
7. Spesifikasjoner
Detailed technical specifications for the PHILIPS Stellar Bright 16W LED Bulb:
| Trekk | Spesifikasjon |
|---|---|
| Merke | PHILIPS |
| Modellnavn | StellarBright |
| Modellnummer | 929001818814_6 |
| Lys type | LED |
| Wattage | 16 watt |
| Pære base | B22D |
| Lys farge | Kult dagslys |
| Fargetemperatur | 6500 Kelvin |
| Driftsvoltage | 220-240 volt |
| Lysutbytte (maksimal) | 1440 lumen |
| Effektivitet | 90 lumens per watt, Energy Efficient |
| Lyskildens levetid | 15,000 timer |
| Spesialfunksjon | Energy Efficient, Non Dimmable |
| Materialtype | Polykarbonat (PC) |
| Innendørs utendørs bruk | Innendørs |
| Antall varer (i pakken) | 6 telling |
| Item Weight (for pack) | 480 gram |
This image depicts a family, including parents and children, comfortably relaxing in a bedroom illuminated by the PHILIPS Stellar Bright LED Bulb. The lighting is designed to be gentle on the eyes, promoting well-being.
8. Garanti og støtte
8.1 Garantiinformasjon
This PHILIPS Stellar Bright 16W LED Bulb comes with a 2 års garanti on the product from the date of invoice. Please retain your purchase receipt as proof of purchase for warranty claims.
8.2 Manufacturer and Importer Contact
For support, warranty claims, or further inquiries, please contact:
Produsent: Signify Innovations India Limited (formerly known as Philips Lighting India Limited)
PS ARCADIA CENTRAL, 3A, 3rd floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata – 700 017, India
Importør: Signify Innovations India Limited
PS Arcadia Central, 3A, 3rd Floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata-700017, West Bengal, India