Brukerhåndbok for ANVIZ VF10 biometrisk og PIN-tilgangskontrollenhet

1. Introduksjon

The ANVIZ VF10 is a compact and versatile biometric access control and time attendance terminal designed for efficient security and workforce management. It integrates fingerprint recognition and PIN authentication methods, offering robust security with ease of use. The device supports multiple communication interfaces, including TCP/IP, Mini USB, RS485, and Wiegand Out, allowing for flexible integration into various security systems.

This manual provides detailed instructions for the installation, configuration, and operation of your ANVIZ VF10 device. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. Sikkerhetsinformasjon

• Ensure the power supply used is DC12V and meets the device's power requirements. An incorrect power supply can damage the device.
• Do not expose the device to extreme temperatures, humidity, or direct sunlight unless protected by an optional waterproof casing (IP53 rated).
• Unngå å installere enheten i områder med sterk elektromagnetisk interferens.
• Ikke forsøk å demontere eller reparere enheten selv. Overlat all service til kvalifisert personell.
• Hold fingeravtrykkssensoren ren og tørr for optimal ytelse.

3. Pakkens innhold

Upon opening the package, please verify that all items are present and in good condition. The standard package typically includes:

• ANVIZ VF10 Biometric Terminal
• Monteringstilbehør (skruer, veggplugger)
• Connection cables (e.g., for power, network, door lock)
• Hurtigstartveiledning (hvis aktuelt)
• Note: The DC12V power supply is not included and must be purchased separately.

4. Enhet overview

Familiarize yourself with the main components of the ANVIZ VF10 device.

4.1 Foran View

The front panel includes the LCD display, keypad, and fingerprint sensor. The LCD shows operational status, time, date, and menu options. The keypad is used for PIN entry and menu navigation. The fingerprint sensor is for biometric authentication.

4.2 vinklet View

4.3 Side View

4.4 Porter og tilkoblinger

The ANVIZ VF10 features various ports for communication and integration:

• TCP/IP (Ethernet): For network connectivity and communication with management software.
• Mini-USB: For local data transfer and firmware updates.
• RS485: For connecting to external slave readers (e.g., ANVIZ T5S biometric or RFID readers) or other compatible devices.
• Wiegand Out: For connecting to a remote relay (e.g., ANVIZ SC011) or third-party access control panels.
• Reléutgang: For direct control of a door lock or gate.
• Strøminngang: For DC12V power supply.

5. Installasjon

Proper installation is crucial for the device's performance and longevity. It is recommended to have a qualified technician perform the installation.

5.1 Montering av enheten

1. Choose a suitable location on a wall, ensuring it is at an appropriate height for all users to comfortably access the fingerprint sensor and keypad.
2. Use the provided mounting template (if available) to mark the drilling points on the wall.
3. Bor hull og sett inn veggplugger.
4. Secure the mounting bracket (if separate) or the device directly to the wall using the screws.

5.2 Kablingstilkoblinger

Before making any connections, ensure the power supply is disconnected.

• Strømtilkobling: Connect the DC12V power supply to the designated power input terminals. Observe polarity.
• Nettverkstilkobling (TCP/IP): Connect an Ethernet cable from your network switch/router to the device's RJ45 port.
• Door Lock Connection: Connect the device's relay output to your electric door lock. Consult the door lock's manual for specific wiring diagrams (e.g., NO/NC connections).
• RS485-tilkobling: If connecting a slave reader (e.g., T5S), connect the RS485 A and B terminals of the VF10 to the corresponding A and B terminals of the slave reader.
• Wiegand Out Connection: If connecting to a remote relay (e.g., SC011) or an access control panel, connect the Wiegand Data 0, Data 1, and Ground terminals.

Always refer to the detailed wiring diagram provided in the full product manual for precise connections.

6. Første oppsett

After successful installation and wiring, power on the device using the power button. The device will boot up and display the main interface.

6.1 Grunnleggende konfigurasjon

1. Språkvalg: Navigate through the menu to select your preferred language (Italian, German, English, Turkish).
2. Dato og klokkeslett: Angi riktig dato og klokkeslett for nøyaktige oppmøteregistreringer.
3. Nettverksinnstillinger: Configure the device's IP address, subnet mask, and gateway if using TCP/IP communication. This can be done manually or via DHCP.
4. Administratoroppsett: It is highly recommended to register at least one administrator fingerprint and/or PIN immediately to secure the device and access advanced settings.

7. Brukeradministrasjon

The VF10 can store up to 1000 users and 1000 fingerprints. User management is typically performed through the device's menu or via the CrossChex software.

7.1 Adding a New User

1. Access the main menu (usually by pressing 'M' or 'OK' and entering administrator credentials).
2. Navigate to "User Management" or "Add User".
3. Enter a unique User ID.
4. Register Fingerprint: Place the user's finger on the sensor three times, lifting it slightly between each scan, until successful registration is confirmed.
5. Set PIN (Password): Enter a numeric PIN for the user.
6. Assign user roles (e.g., normal user, administrator).
7. Lagre brukerinformasjonen.

7.2 Deleting a User

From the "User Management" menu, select "Delete User", choose the User ID, and confirm the deletion.

8. Drift

The ANVIZ VF10 supports fingerprint and ID+PIN authentication for access control and time attendance.

8.1 Fingerprint Authentication

1. Place a registered finger flat on the fingerprint sensor.
2. The device will verify the fingerprint. A successful verification will be indicated by a visual and/or audible prompt, and the door will unlock (if connected).

8.2 ID + PIN Authentication

1. Enter your User ID using the keypad.
2. Press the 'OK' button.
3. Enter your registered PIN.
4. Press the 'OK' button. A successful verification will be indicated, and the door will unlock.

8.3 Stempling inn/ut

Use the 'IN' and 'OUT' buttons on the keypad before performing authentication to record attendance events. For example, press 'IN', then authenticate with fingerprint or PIN.

8.4 Viewing Records

Enheten tillater viewing of attendance records directly on the LCD screen. Navigate through the menu to "View Records" or "Attendance Logs". The device can store up to 50,000 log records.

9. Software Integration (CrossChex)

The ANVIZ VF10 integrates with ANVIZ CrossChex software for comprehensive management of users, devices, attendance data, and reporting.

9.1 CrossChex Standard Software

CrossChex Standard provides advanced features for managing multiple devices, complex shift schedules, access rules, and detailed attendance reports. It allows for centralized user enrollment and data synchronization.

9.2 CrossChex Lite Software

CrossChex Lite is a streamlined version for basic time attendance and access control functions. It is suitable for smaller installations or simpler requirements.

9.3 Data Download and Reporting

Connect the VF10 to the CrossChex software via TCP/IP or Mini USB to download attendance logs and user data. The software can then generate various reports, including daily, weekly, and monthly attendance summaries, late arrivals, early departures, and overtime.

10. Vedlikehold

• Rengjøring: Gently wipe the fingerprint sensor and LCD screen with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Datasikkerhetskopiering: Regularly back up attendance records and user data using the CrossChex software to prevent data loss. The device has a lithium battery for data storage during power outages, but regular backups are still recommended.
• Fastvareoppdateringer: Check the ANVIZ official website for available firmware updates to ensure optimal performance and access to new features. Follow the provided instructions carefully for firmware upgrades.

11. Feilsøking

12. Spesifikasjoner

13. Garanti og støtte

For warranty information, please refer to the warranty card included with your product or visit the official ANVIZ website. Technical support is available through ANVIZ authorized distributors and service centers. Please have your product model and serial number ready when contacting support.

For ytterligere hjelp kan du besøke ANVIZ Official Webnettstedet eller kontakt din lokale forhandler.