Hicon Ice Maker with LED Display and 2-in-1 Water Dispenser

Introduksjon

Thank you for choosing the Hicon Ice Maker with 2-in-1 Water Dispenser. This appliance is designed to provide convenient access to ice and cold water. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.

Sikkerhetsinstruksjoner

• Sørg for at apparatet er plassert på en stabil, jevn overflate, unna direkte sollys og varmekilder.
• Ikke senk apparatet, strømledningen eller støpselet ned i vann eller andre væsker.
• Hold barn unna apparatet under bruk.
• Bruk kun drikkevann i ismaskinen.
• Trekk ut støpselet til apparatet før rengjøring eller når det ikke er i bruk over lengre tid.
• Do not operate the appliance with a damaged cord or plug. Contact qualified service personnel for repairs.
• Ensure proper ventilation around the unit. Maintain at least 10 cm of space around the sides and back.

Produkt overview

Familiarize yourself with the components of your Hicon Ice Maker.

Figur 1: Kontrollpanelets oppsett
This image displays the control panel with buttons for power, ice size selection (Small, Medium, Large), and water dispensing. Indicator lights show when the ice basket is full, water is needed, or the unit is powered on.

Figure 2: Bullet-Shaped Ice Production
The ice maker produces popular bullet-shaped ice cubes, shown here with a water bottle installed on top for automatic water supply.

Oppsett

Utpakking og plassering

1. Remove all packaging materials and inspect the unit for any damage.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
3. La enheten stå stående i minst 2–4 timer før du kobler den til stikkontakten, spesielt hvis den har blitt transportert horisontalt. Dette lar kjølemediet sette seg.

Tilsetning av vann

The Hicon Ice Maker offers two methods for water supply:

Figure 3: Water Filling Methods
The left side shows automatic water addition using a 5-gallon bottle. The right side shows manual water addition by pouring water into the reservoir.

1. Automatic Water Supply (using a water bottle): Place a standard 2, 3, or 5-gallon water bottle onto the top dispenser opening. Ensure the bottle is securely seated.
2. Manuell vannforsyning: Open the top lid and pour potable water directly into the water reservoir until it reaches the maximum fill line. Do not overfill.

Note: The melted ice water is recycled back into the reservoir for subsequent ice production cycles.

Bruksanvisning

1. Strøm på: Plug the appliance into a grounded electrical outlet. Press the PÅ/AV button on the control panel to start the unit.
2. Velg isstørrelse: Trykk på ICE CUBE SIZE SELECTION button repeatedly to cycle through the available ice sizes: Small (S), Medium (M), and Large (L). The corresponding indicator light will illuminate.
3. Isproduksjon: The unit will begin the ice-making cycle. The first batch of ice may take 6-10 minutes. Subsequent batches will be produced continuously.
4. Indikator for full is: Når iskurven er full, IS FULLT indicator light will illuminate, and the machine will pause ice production. Remove ice to resume operation.
5. Vann Shortage-indikator: If the water reservoir is low, the VANN SHORTAGE indicator light will illuminate. Add more water using either the automatic or manual method.
6. Dispense Cold Water: To dispense cold water, place a glass under the cold water tap and press the VANN button. The water nozzle can be extended and retracted.
7. Slå av: Trykk på PÅ/AV knappen for å slå av apparatet.

Note: The ice produced can remain in the basket for approximately 1-2 hours if the machine is turned off, but it is not a freezer and ice will eventually melt.

Vedlikehold

Rengjøring

1. Før rengjøring: Always unplug the ice maker from the power outlet.
2. Innvendig rengjøring: Remove the ice basket. Clean the interior of the water reservoir and ice-making components with a soft cloth damprengjort med en mild såpeløsning. Skyll grundig med rent vann.
3. Utvendig rengjøring: Tørk av den ytre overflaten med en myk klutamp klut. Ikke bruk skurende rengjøringsmidler eller løsemidler.
4. Drenering: Periodically drain any remaining water from the reservoir using the drain plug located at the bottom or back of the unit (refer to specific model for exact location).
5. Anbefaling for første gangs bruk: For best taste, clean the unit thoroughly before its first use.

Lagring

If the ice maker will not be used for an extended period, drain all water, clean the unit, and allow it to dry completely before storing in a cool, dry place.

Feilsøking

Spesifikasjoner

• Merke: Hicon
• Modell: B07S3JLSKY
• Produktmål (D x B x H): 35.7 cm x 42.3 cm x 45.2 cm
• Isproduksjonskapasitet: Up to 25 kg per 24 hours
• Islagringskapasitet: 1.2 kg
• Wattage: 160 watt
• Voltage: 220 volt
• kjølemiddel: R600a
• Materialtype: Plast
• UPC: 195893458158

Figur 4: Produktdimensjoner
This diagram illustrates the physical dimensions of the ice maker for placement and installation planning.

Garanti og støtte

The Hicon Ice Maker comes with a ett års garanti fra kjøpsdatoen. Denne garantien dekker produksjonsfeil under normale bruksforhold.

For warranty claims, technical support, or any questions regarding your product, please contact Hicon customer service. Please have your model number (B07S3JLSKY) and proof of purchase ready when contacting support.

Hicon has over 10 years of experience in developing ice machines, ensuring advanced ice-making technology and excellent quality.