JONATHAN Y JYL6134A

JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light Instruction Manual

Modell: JYL6134A

Introduksjon

This manual provides essential instructions for the safe installation, operation, and maintenance of your JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light. Please read this manual thoroughly before beginning installation and retain it for future reference.

Sikkerhetsinformasjon

ADVARSEL: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in injury or death.

  • Alle elektriske tilkoblinger må være i samsvar med lokale forskrifter og forskrifter, National Electric Code (NEC) og ANSI/NFPA 70-1999.
  • Rådfør deg med en kvalifisert elektriker hvis du er usikker på installasjonsprosessen.
  • This fixture must be hardwired. Professional installation is recommended.
  • Ikke koble denne lampen til et ujordet elektrisk system.
  • Ikke overskrid den anbefalte verdientage for pærer.
  • Sørg for at alle tilkoblinger er sikre før du gjenoppretter strømmen.

Pakkeinnhold

Kontroller at alle komponenter er til stede før installasjonen starter:

  • Monteringsplate
  • Baldakin
  • Pendant Shades (3)
  • LED-pærer (3)
  • Monteringsutstyr (skruer, trådmuttere)
Image showing the JONATHAN Y Apollo 3-Light LED Pendant Light with features like sloped ceiling compatibility, dimmer compatibility, adjustable height, easy assembly, and included LED bulbs.

Figur 1: Overview of the JONATHAN Y Apollo 3-Light LED Pendant Light components and features.

Oppsett og installasjon

Professional installation by a qualified electrician is recommended for this hardwired fixture.

  1. Slå av strømmen: Before starting, ensure the power to the circuit is turned off at the main electrical panel.
  2. Klargjør monteringsplaten: Attach the mounting plate to the junction box in the ceiling using the provided screws.
  3. Juster anhengshøyden: Each pendant's cord length is adjustable. Determine the desired hanging height for each light and secure the cord at the canopy.
  4. Ledningstilkoblinger: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
  5. Fest baldakin: Carefully push the canopy up to the ceiling, covering the junction box and wiring. Secure it with the provided screws.
  6. Installer pærer: Screw the included LED bulbs into each pendant socket.
  7. Gjenopprett kraften: Once installation is complete and all connections are secure, restore power at the main electrical panel.
Image illustrating the adjustable, dimmable, and easy assembly features of the JONATHAN Y Apollo LED Pendant Light.

Figure 2: Key features for installation, including adjustable height and easy assembly.

Video 1: En kort produktgjennomgangview of the JONATHAN Y Apollo 3-Light LED Pendant Light, showcasing its design and features relevant to installation.

Bruksanvisning

  • Slå på/av: Operate the light using a standard ON/OFF wall switch.
  • Dimmefunksjon: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible dimmer switch installed and dimmable LED bulbs.
  • Justerbar høyde: The height of each pendant can be adjusted during installation to suit your preference and space requirements.

Vedlikehold

  • Rengjøring: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Bytte av pære: Ensure power is off before replacing bulbs. Use E26 base LED bulbs, not exceeding 40 watts per bulb.

Feilsøking

ProblemMulig årsakLøsning
Lyset lyser ikke.Power is off; loose wiring; faulty bulb.Check circuit breaker; verify wire connections; replace bulb.
Lette flimmer.Loose bulb; incompatible dimmer; unstable power supply.Tighten bulb; ensure dimmer compatibility; consult electrician.
Pendant appears crooked.Uneven cord adjustment.Re-adjust cord length for desired alignment.

Spesifikasjoner

TrekkDetalj
ModellnummerJYL6134A
Dimensjoner33.5 cm L x 6 cm B x 10.5 cm H
MaterialeMetall
Farge/finishBlack/Brass Gold
LyskildetypeLED
Pære baseE26
Antall lys3
Max Wattage per pære40 watt
Voltage120 volt
Lysstyrke800 Lumen (per included bulb)
Fargetemperatur2700 Kelvin (varm hvit)
InstallasjonstypeFlush Mount (Ceiling Mount)
Spesielle funksjonerDimmable, Adjustable Height
Innendørs/utendørs brukInnendørs
Varevekt5.59 pund
Diagram showing the dimensions of the JONATHAN Y Apollo 3-Light LED Pendant Light, including max height 82.5 inches, min height 10.5 inches, width 6 inches, and overall length 33.5 inches.

Figure 3: Detailed dimensions of the pendant light fixture.

Garanti og støtte

Garanti: Dette produktet leveres med 30 dagers produsentgaranti kun for defekter. Normal slitasje dekkes ikke av garantien. Synlige skader som ikke er registrert ved levering, vil bli ansett som kundeskade og dekkes ikke av garantien. Alle produkter inspiseres ved ankomst, og slitte, skitne eller flekkete varer vil ikke bli godkjent for garantikrav.

For warranty information or support, please contact the internet customer service center.

Video 2: Another product overview from JONATHAN Y, providing additional visual details of the pendant light.

© 2026 JONATHAN Y. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.