1. Produktet er overview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Motor med høy kapasitet: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Ergonomisk design: Compact and ergonomic form for comfortable handling.
- Verktøyfri justering av beskyttelse: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Sikkerhetsinstruksjoner
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Generell sikkerhet
- Bruk alltid passende personlig verneutstyr (PPE), inkludert vernebriller, hørselsvern, hansker og støvmaske.
- Sørg for at arbeidsstykket er sikkert clampfør operasjon.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Ikke bruk verktøyet i eksplosive atmosfærer, som i nærvær av brennbare væsker, gasser eller støv.
- Hold barn og tilskuere unna mens du bruker et elektroverktøy.
Elektrisk sikkerhet
- Sørg for at strømforsyningen voltage samsvarer med klassifiseringen på verktøyets navneplate.
- Ikke misbruk ledningen. Bruk aldri ledningen til å bære, trekke eller koble fra elektroverktøyet. Hold ledningen unna varme, olje, skarpe kanter eller bevegelige deler.
- Hvis du bruker et elektroverktøy i adamp plassering er uunngåelig, bruk en RCD-beskyttet forsyning.
Spesifikk sikkerhet for vinkelslipere
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Komponenter og funksjoner
Nøkkelkomponenter:
- Hoveddel: Houses the motor, electronics, and gearbox.
- Beskyttende vakt: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Spindellåseknapp: For easy disc changes.
- Skyvebryter: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Lufteventiler: For motor cooling and dust expulsion.
4. Oppsett
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Montering av beskyttelsesskjermen
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Trykk og hold inne spindellåseknappen.
- Plasser den indre klutenampflensen på spindelen.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Skru på clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Slipp spindellåseknappen.
5. Bruksanvisning
Slår på/av
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Variabel hastighetskontroll
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Hold alltid kvernen godt fast med begge hender.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Vedlikehold
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Rengjøring
- Koble alltid fra verktøyet før rengjøring.
- Rengjør ventilasjonsåpningene regelmessig for å forhindre støvopphopning, som kan føre til overoppheting. Bruk trykkluft hvis tilgjengelig.
- Tørk av utsiden av verktøyet med en klutamp klut. Ikke bruk sterke kjemikalier eller skurende rengjøringsmidler.
Kullbørster
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Lagring
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| Verktøyet starter ikke | Ingen strømforsyning Restart interlock activated (after power failure) Skadet strømledning | Sjekk strømtilkoblingen Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Verktøyet stopper under drift | Overbelastningsbeskyttelse aktivert Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Overdreven vibrasjon | Worn or damaged disc Feilmontert plate Løst håndtak | Bytt ut platen Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Slitte kullbørster Dust buildup in vents | Få børstene inspisert/skiftet ut av et servicesenter Rengjør luftventilene grundig |
8. Spesifikasjoner
| Karakteristisk | Verdi |
|---|---|
| Modellnummer | 447668 |
| Strøminngang | 1700 W |
| Strømutgang | 1050 W |
| Voltage | 230 V |
| Hyppighet | 50/60 Hz |
| Maks. Diameter på skive | 125 mm |
| Hastighet uten belastning | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| Kabellengde | 4 m |
| Dimensjoner (L x B x H) | 340 x 77 x 105 mm |
| Vekt | 2.6 kg |
| Farge | Rød, svart, sølv |
| Materiale | Metall |
9. Garanti og støtte
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webnettstedet eller på produktemballasjen din.