Fluid Audio FX80 8-inch Coaxial Reference Monitor Instruction Manual

1. Introduksjon

The Fluid Audio FX80 is an 8-inch single point source coaxial reference monitor designed for accurate audio reproduction in studio environments. This bi-amplified monitor delivers 110 watts of power across a frequency response of 35Hz-22kHz (+/-3dB), making it suitable for critical listening and mixing tasks. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your FX80 monitors.

2. Oppsett

2.1 Utpakking

Carefully remove the FX80 monitors from their packaging. Retain the original packaging for future transport or storage.

2.2 Plassering

Optimal placement of your FX80 monitors is crucial for accurate sound reproduction. Position the monitors to form an equilateral triangle with your listening position. The coaxial design provides a wide sweet spot, but proper angling towards the listener is still recommended.

The front-loaded slot port design allows for more flexible placement options, including closer proximity to walls, compared to rear-ported designs. However, consider using the Acoustic Space tuning controls on the rear panel to compensate for boundary effects if placing monitors near walls or in corners.

2.3 Tilkoblinger

The FX80 offers versatile input options for connecting to your audio interface, mixer, or other audio sources.

• XLR-inngang: For balanserte tilkoblinger fra profesjonelt lydutstyr.
• TRS-inngang: For balanced or unbalanced 1/4-inch connections.
• RCA-inngang: For unbalanced connections from consumer-grade audio devices.

Ensure the input switch (located near the input jacks) is set to the correct input type (+4 dBu for balanced XLR/TRS, -10 dBV for unbalanced RCA) to match your source device's output level.

3. Drift

3.1 Strøm på/av

Locate the power switch on the rear panel of the monitor. Flip the switch to the 'On' position to power on the unit. The front-panel LED will illuminate to indicate power status.

3.2 Volumkontroll

The volume knob on the rear panel allows you to adjust the output level of the monitor. Start with the volume set to minimum and gradually increase it to a comfortable listening level.

3.3 Akustiske tuningkontroller

The FX80 features a set of DIP switches on the rear panel for acoustic tuning, allowing you to optimize the monitor's response to your listening environment.

• HF Shelf: Adjusts the high-frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
• Midt EQ: Adjusts the mid-range frequency response. Options typically include 0dB, +1dB, -1dB, -2dB.
• Akustisk rom: Compensates for bass response when monitors are placed near boundaries. Options typically include 0dB (free space), -1dB (near wall), -2dB (near corner), -4dB (corner).
• Low Freq Cutoff: Sets a high-pass filter to remove frequencies below a certain point, useful when using a subwoofer. Options typically include Flat, 60Hz, 80Hz, 100Hz.

Refer to the diagrams on the rear panel for specific switch configurations and their corresponding frequency curves.

4. Funksjoner

The Fluid Audio FX80 monitor incorporates advanced design elements for superior audio performance:

• 8" Coaxial Studio Monitor
• Frequency response: 35Hz-22kHz (+/- 3dB)
• Delefrekvens: 2.4kHz
• Class D and DSP powered
• Signal-to-noise: 100dB (typical A-weighted)

4.1 Coaxial Design

The coaxial driver design positions the tweeter in the acoustic center of the woofer. This creates a single point source for all frequencies, resulting in superior phase coherence, accurate stereo imaging, and a consistent soundstage across a wider listening area. This design minimizes phase anomalies that can occur with traditional two-way speaker designs where drivers are separated.

4.2 Front-Loaded Slot Port

The bass-reflex slot port is strategically placed on the front panel. This design tunes the cabinet to maximize bass output efficiency and directly radiates bass energy towards the listener. It also offers greater flexibility in monitor placement within your studio, as it reduces issues associated with rear-firing ports interacting with walls.

5. Spesifikasjoner

Detailed technical specifications for the Fluid Audio FX80 monitor:

6. Vedlikehold

6.1 Rengjøring

To clean your FX80 monitors, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the cabinet finish or driver cones. Do not spray cleaning liquids directly onto the monitor.

6.2 Miljøhensyn

Keep the monitors away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the units to prevent overheating.

7. Feilsøking

If you encounter issues with your FX80 monitors, try the following steps:

• Ingen lyd:
  • Check if the power switch is on and the front LED is illuminated.
  • Verify all audio cables are securely connected to both the monitor and the audio source.
  • Ensure the volume knob on the monitor and your audio source is turned up.
  • Confirm the correct input type is selected via the rear panel switch.
• Forvrengt lyd:
  • Reduser volumet på både skjermen og lydkilden.
  • Sjekk om lydkabler er skadet.
  • Ensure the input switch matches the signal level of your source (+4 dBu for balanced, -10 dBV for unbalanced).
• Summing eller støy:
  • Sørg for at alle lydkabler er riktig skjermet og tilkoblet.
  • Try using balanced XLR or TRS cables if possible, as they are less susceptible to noise.
  • Move audio cables away from power cables.
  • Sjekk for jordsløyfer.

8. Offisiell produktvideo

Watch the official Fluid Audio FX80 information video for a visual overview av produktets funksjoner og design.

9. Garanti og støtte

The Fluid Audio FX80 monitors come with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Fluid Audio webnettstedet.

For technical support, troubleshooting beyond this manual, or warranty claims, please contact Fluid Audio customer service directly.