MaedHawk X4 aptX HD Bluetooth Car AUX Adapter User Manual

Introduksjon

This manual provides instructions for the MaedHawk X4 aptX HD Bluetooth Car AUX Adapter. This device allows you to wirelessly stream audio from your Bluetooth-enabled smartphone or other devices to your car stereo, wired headphones, or home speakers via a 3.5mm AUX input. It features Bluetooth 5.0, aptX HD, and aptX Low Latency codecs for high-quality audio and reduced delay.

Pakkeinnhold

Bekreft at alle varene er til stede i pakken:

• 1 * X4 Bluetooth receiver
• 1 * 3.5mm Female-Female Audio cable
• 1 * USB-C Charging cable
• 1 * Brukerhåndbok

Produkt overview

The MaedHawk X4 Bluetooth adapter is designed for ease of use and versatility. It features a compact design with a rotatable 3.5mm AUX jack, allowing it to fit into various spaces. The device includes control buttons for volume, track navigation, and a multi-function button (MFB) for power and pairing.

Oppsett og sammenkobling

1. Lad enheten: Before first use, fully charge the MaedHawk X4 using the provided USB-C charging cable. The device can also be charged while in use.
2. Slå på og gå inn i paringsmodus: Press and hold the Multi-Function Button (MFB) for approximately 3 seconds until the LED indicator flashes, indicating it is in pairing mode.
3. Koble til lydkilde: Plug the 3.5mm rotatable jack of the MaedHawk X4 into the AUX input of your car stereo, wired headphones, or home speaker system.
4. Koble til smarttelefonen din:
   • Gå til Bluetooth-innstillingene på smarttelefonen din.
   • Sørg for at Bluetooth er aktivert.
   • Søk etter available devices and select "Maedhawk X4" to connect.
   • Once connected, the LED indicator on the adapter will show a steady light.
5. Start strømming: Open your preferred music application on your smartphone and begin playing audio.

Bruksanvisning

• Slå på/av: Press and hold the MFB for 3 seconds to power on or off.
• Spill av/pause: Short press the MFB to play or pause music.
• Volum opp/ned: Short press the "+" button for volume up, short press the "-" button for volume down.
• Neste spor/forrige spor: Long press the "+" button for the next track, long press the "-" button for the previous track.
• Svar/avslutt samtale: Trykk kort på MFB-knappen for å svare på et innkommende anrop eller avslutte en pågående samtale.
• Avvis anrop: Trykk lenge på MFB-knappen for å avvise et innkommende anrop.
• Aktiver stemmeassistent: Double-press the MFB to activate your smartphone's voice assistant (e.g., Siri, Google Assistant).
• Dobbel enhetstilkobling: The MaedHawk X4 supports connecting to two Bluetooth devices simultaneously. After pairing the first device, put the adapter back into pairing mode and connect the second device.

Advanced Audio Codec Selection (for Android)

To ensure you are utilizing the highest quality audio codecs like aptX HD or aptX Low Latency, you may need to adjust settings on your Android smartphone. The adapter automatically selects the highest available codec, but manual verification is possible.

1. Aktiver utvikleralternativer: Go to "Settings" > "About phone" (or "System" > "About phone"). Tap "Build number" seven times to enable Developer Options.
2. Access Bluetooth Audio Codec Settings: Go to "Settings" > "System" > "Developer options". Find "Bluetooth Audio Codec".
3. Select Codec: Choose your desired codec (e.g., aptX HD, aptX Low Latency). Note that the codec will automatically match the highest supported by both your phone and the adapter.

Feilsøking

• Ingen strøm/enhet slår seg ikke på: Ensure the device is fully charged. Connect it to the USB-C charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Kan ikke pares med smarttelefon:
  • Ensure the adapter is in pairing mode (flashing LED).
  • Turn off and on your smartphone's Bluetooth.
  • Forget the device from your smartphone's Bluetooth list and try pairing again.
  • Ensure the adapter is not already connected to another device.
• No Audio or Low Volume:
  • Check that the adapter is securely plugged into the AUX input.
  • Increase the volume on both the MaedHawk X4 adapter and your smartphone.
  • Ensure your car stereo or speaker system is set to the correct AUX input source.
  • Verify that the correct audio codec is selected on your smartphone (see Advanced Audio Codec Selection).
• Sound Distortion/Poor Quality:
  • Ensure the 3.5mm connection is secure and clean.
  • Move your smartphone closer to the adapter to avoid interference.
  • Check if your smartphone supports aptX HD or aptX Low Latency for optimal sound quality.
• Call Quality Issues (Microphone):
  • Ensure the adapter's microphone is not obstructed.
  • Speak clearly and directly towards the adapter.
  • Environmental noise can affect call clarity; CVC8.0 Noise Reduction helps but extreme noise may still impact performance.

Spesifikasjoner

Sikkerhetsinformasjon

• Ikke utsett enheten for ekstreme temperaturer (varme eller kalde) eller direkte sollys.
• Unngå kontakt med vann eller andre væsker.
• Ikke forsøk å demontere, reparere eller modifisere enheten. Dette vil ugyldiggjøre garantien.
• Oppbevares utilgjengelig for barn.
• Kast enheten og batteriet på en ansvarlig måte i henhold til lokale forskrifter.
• Avoid using the device in environments where it may interfere with other electronic equipment.

Garanti og støtte

The MaedHawk X4 Bluetooth Car AUX Adapter comes with a warranty. Please refer to the included Warranty Card for specific terms and conditions. For technical support or customer service, please contact MaedHawk customer support through the retailer where the product was purchased or visit the official MaedHawk webnettstedet.

MaedHawk Store: Visit the MaedHawk Store