Lincoln Electric Bester 190C Multi-Process Welder 230V User Manual

1. Introduksjon

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Lincoln Electric Bester 190C Multi-Process Welder. The Bester 190C is a versatile 230V inverter welding machine capable of MIG-MAG (Gas Metal Arc Welding), MMA (Manual Metal Arc Welding), and TIG Lift (Tungsten Inert Gas Welding) processes. It is designed to be portable, lightweight, compact, and robust, offering powerful performance for various welding tasks. Please read this manual thoroughly before using the equipment.

2. Sikkerhetsinformasjon

ADVARSEL: Welding can be dangerous. Always follow safety precautions to prevent injury or death. Read and understand all safety information before operating this equipment.

• Elektrisk støt: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the workpiece is properly grounded.
• Røyk og gasser: Kan være helsefarlig. Hold hodet unna røyken. Bruk ventilasjon eller avtrekk for å fjerne røyk fra pustesonen.
• Buestråler: Kan brenne øyne og hud. Bruk sveisehjelm med et egnet skyggefilter. Bruk verneklær for å dekke til eksponert hud.
• Brann og eksplosjon: Sveisegnister kan forårsake brann eller eksplosjon. Hold brennbare materialer unna sveiseområdet. Ha et brannslukningsapparat lett tilgjengelig.
• Varme deler: Kan forårsake alvorlige brannskader. La utstyret avkjøles før du berører det.
• Støy: Overdreven støy kan skade hørselen. Bruk hørselsvern.
• Pacemakere: Magnetic fields from high currents can affect pacemakers. Consult your doctor before welding.

3. Produktet er overview og komponenter

The Bester 190C features a user-friendly digital display and controls for easy operation. It is equipped with a robust housing for durability.

3.1 Kontroller og tilkoblinger på frontpanelet

Figur 1: Lincoln Electric Bester 190C Multi-Process Welder front panel with controls and digital display. This image shows the main interface for selecting welding modes, adjusting current and voltage, and monitoring parameters.

Figur 2: En annen view of the Lincoln Electric Bester 190C Multi-Process Welder, highlighting the control panel and various connection points for welding cables and gas lines.

Frontpanelet inkluderer:

• Digital skjerm: Shows welding parameters such as current and voltage.
• Modusvalgknapper: For choosing MIG-MAG, MMA, or TIG Lift welding.
• Parameter Adjustment Knobs: To fine-tune welding current, voltage, and other settings.
• Utgangsterminaler: Connections for welding torch and earth clamp.
• Wire Feeder Mechanism: For MIG-MAG welding wire spool and feeding.

3.2 Inkludert tilbehør

Figur 3: The included MIG-MAG torch and the 3-meter earth clamp cable. These are essential for starting MIG-MAG welding operations.

The welder is supplied with:

• MIG-MAG Torch (3 meters)
• Jord Clamp Kabel (3 meter)

Note: An electrode holder and TIG torch are not included and must be purchased separately for MMA and TIG Lift welding, respectively.

4. Oppsett og installasjon

Before beginning any setup, ensure the welder is switched off and disconnected from the main power supply.

4.1 Strømtilkobling

• Connect the welder to a 230V single-phase power supply. The machine is designed to operate within a voltage range of 230V +/- 15%.
• Ensure the power outlet is properly grounded and capable of supplying the required current (16A fuse recommended).
• The Bester 190C is compatible with sufficiently powerful generators.

4.2 Tilkobling av sveisekabler

Figur 4: The Bester 190C Welder with the MIG torch and earth clamp properly connected to the front panel terminals, ready for operation.

• Jord Clamp: Koble til jord clamp cable to the appropriate terminal on the front panel. Attach the clamp sikkert fast til arbeidsstykket, slik at god elektrisk kontakt sikres.
• MIG-MAG Torch: Connect the MIG-MAG torch to its designated connector on the front panel. Ensure it is firmly seated.
• MMA/TIG (Optional): If using MMA or TIG Lift, connect the electrode holder or TIG torch to the appropriate terminals (positive or negative, depending on polarity requirements for the specific process and electrode/filler material).

4.3 Gas Connection (for MIG-MAG and TIG)

• Connect the gas hose from your shielding gas cylinder (e.g., Argon/CO2 mix for MIG, pure Argon for TIG) to the gas inlet on the welder.
• Sørg for at alle koblinger er tette for å forhindre gasslekkasjer.
• Set the gas flow rate according to your welding process and material requirements using a flowmeter on the gas cylinder regulator.

4.4 Wire Loading (for MIG-MAG)

• Åpne trådspolerommet.
• Place the wire spool (max 5 kg, 200 mm diameter) onto the spindle, ensuring it rotates freely.
• Feed the welding wire through the guide tube and into the drive rollers.
• Close the drive roller tension arm and adjust the tension. The wire should feed smoothly without slipping or deforming.
• With the torch pointed away from yourself and others, press the trigger to feed the wire through the torch liner until it exits the contact tip.
• The welder supports wire diameters from 0.6 mm to 1.0 mm.

5. Bruksanvisning

The Bester 190C offers three welding processes: MIG-MAG, MMA, and TIG Lift.

5.1 Prosessvalg

• Slå på sveiseapparatet med hovedstrømbryteren.
• Use the mode selection buttons on the front panel to choose your desired welding process: MIG-MAG, MMA, or TIG Lift. The selected mode will be indicated on the digital display.

5.2 Parameterjustering

• MIG-MAG: Adjust the welding current (wire feed speed) and voltage using the dedicated knobs. Refer to welding charts for recommended settings based on material thickness and wire type. The machine allows for easy polarity inversion.
• MMA: Juster sveisestrømmen (amperage) basert på elektrodetype og diameter.
• TIG Lift: Adjust the welding current. TIG Lift arc starting requires touching the tungsten electrode to the workpiece and then lifting it slightly to initiate the arc.

5.3 Avanserte funksjoner

The Bester 190C includes features to enhance welding performance:

• Arc Force: Automatically adjusts the welding current to prevent the electrode from sticking during MMA welding, improving arc stability.
• Hot Start: Provides an initial boost of current at the start of MMA welding to ensure easy arc ignition.
• Anti-stick: Reduces the current if the electrode sticks to the workpiece during MMA welding, making it easier to detach and preventing overheating.

6. Vedlikehold

Regular maintenance ensures the longevity and optimal performance of your welding machine. Always disconnect the welder from the power supply before performing any maintenance.

• Rengjøring: Periodically clean the exterior of the machine with a dry, soft cloth. Use compressed air to blow out dust from inside the machine, especially around cooling vents, but ensure the air is dry and oil-free.
• Kabelinspeksjon: Regularly inspect all welding cables, power cords, and gas hoses for cuts, abrasions, or damage. Replace damaged components immediately.
• Vedlikehold av brenner: For MIG-MAG, regularly clean the contact tip, gas nozzle, and check the wire liner for blockages or wear. Replace consumables as needed. For TIG, inspect the tungsten electrode and sharpen or replace as necessary.
• Drive Rollers (MIG-MAG): Clean the drive rollers and ensure they are free of wire debris. Check for proper tension.

7. Feilsøking

Denne delen tar for seg vanlige problemer du kan støte på. Kontakt kundestøtte for problemer som ikke er oppført her.

8. Tekniske spesifikasjoner

9. Garantiinformasjon

Figur 5: The 2-year warranty badge, indicating the coverage period for the Bester 190C Welder.

The Lincoln Electric Bester 190C Multi-Process Welder comes with a 2 års garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Lincoln Electric warranty policy or contact customer support.

10. Kundestøtte

If you have any questions, require technical assistance, or need to report a problem with your Lincoln Electric Bester 190C Multi-Process Welder, please contact Lincoln Electric customer support. You can find contact information on the official Lincoln Electric webnettstedet eller gjennom din lokale distributør.

When contacting support, please have your product model number (B18259-1) and serial number (if applicable) ready.