RICOO Monitor Stand TS4011 Instruction Manual

1. Produktet er overview

The RICOO TS4011 Monitor Stand is designed to provide an ergonomic and space-saving solution for your display. This stand offers a wide range of adjustments including rotation, swivel, tilt, and height, ensuring optimal viewing comfort for monitors between 17 and 32 inches and up to 7 kg in weight.

RICOO TS4011 Monitor Stand in a modern office setting

Image: The RICOO TS4011 Monitor Stand, black, supporting a monitor on a light wooden desk.

2. Sikkerhetsinformasjon

Please read all instructions carefully before assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in property damage, serious injury, or death.

Sørg for at alle komponenter er til stede og uskadet før montering. Ikke bruk skadede deler.
Ikke overskrid den maksimale vektkapasiteten på 7 kg (15.4 lbs).
Ensure your monitor's VESA mounting pattern (75x75mm or 100x100mm) is compatible with this stand.
Dette produktet er kun beregnet for innendørs bruk.
Hold barn og kjæledyr unna under montering. Små deler kan være en kvelningsfare.
Bruk alltid passende verktøy og følg monteringstrinnene i riktig rekkefølge.
If you have any doubts about the installation, consult a qualified professional.

3. Pakkens innhold

Bekreft at alle varene som er oppført nedenfor er inkludert i pakken din:

Monitor Desk Stand (Main Unit)
Mounting Kit (various screws, washers, spacers, Allen keys)
Bruksanvisning

4. Installasjonsinstruksjoner

Follow these steps to assemble and install your RICOO TS4011 Monitor Stand.

4.1. Monter basen

Attach the main support pole to the base plate using the provided screws and tools. Ensure all connections are secure.

Diagram showing base dimensions and assembly points

Image: Diagram illustrating the base dimensions and attachment points for the stand pole.

4.2. Attach VESA Plate to Monitor

Carefully place your monitor face down on a soft, clean surface. Align the VESA mounting plate from the stand with the mounting holes on the back of your monitor. Use the appropriate screws, washers, and spacers from the mounting kit. Tighten securely, but do not overtighten.

Diagram showing VESA mounting points on a monitor

Image: Diagram indicating VESA mounting hole measurements (A and B) on the back of a monitor.

Illustration of VESA plate attached to monitor

Image: Illustration showing the VESA mounting plate securely attached to the back of a monitor.

4.3. Mount Monitor to Stand

With the VESA plate attached to your monitor, carefully lift the monitor and slide the VESA plate onto the mounting head of the stand. Ensure it clicks into place or is secured with any locking mechanisms. Double-check that the monitor is firmly attached before releasing det.

Bak view of a monitor mounted on the RICOO TS4011 stand

Bilde: Bak view of a monitor securely mounted on the RICOO TS4011 stand, showcasing the VESA attachment.

4.4. Kabeladministrasjon

Utilize the integrated cable management clips on the stand pole to route your monitor cables neatly. This helps to maintain a tidy workspace and prevents cables from snagging during adjustments.

Close-up of cable management clips on the monitor stand

Bilde: Et nærbilde view of the cable management clips on the stand pole, with cables routed through them for an organized setup.

5. Bruksanvisning og justeringer

The RICOO TS4011 Monitor Stand offers various adjustment options to customize your viewopplevelse.

Diagram showing tilt, swivel, rotation, and height adjustments

Image: Visual representation of the stand's adjustable features: 45-degree swivel, 360-degree rotation, 20-degree tilt, and 110mm height adjustment range.

5.1. Høydejustering

To adjust the monitor height, gently push the monitor upwards to its maximum height. This will release the locking mechanism, allowing you to then lower it to your desired position. To raise the monitor, simply lift it. The stand features a gas spring mechanism for smooth height transitions within its 110mm range.

5.2. Tiltjustering

The monitor can be tilted +/-20 degrees vertically. Loosen the tilt screw (if applicable, refer to diagram) on the VESA plate, adjust the monitor to your preferred angle, and then retighten the screw to secure it.

5.3. Svingjustering

The monitor can be swiveled +/-45 degrees horizontally. Gently rotate the monitor to the left or right to achieve your desired viewing vinkel.

5.4. Rotasjonsjustering

The VESA plate allows for a full 360-degree rotation, enabling you to switch between landscape and portrait orientations. Simply rotate the monitor to the desired orientation.

6. Vedlikehold

To ensure the longevity and proper function of your monitor stand, follow these maintenance guidelines:

Rengjøring: Tørk av stativet med en myk klutamp klut. Unngå slipende rengjøringsmidler eller løsemidler som kan skade overflaten.
Periodiske kontroller: Regularly check all screws and connections to ensure they remain tight and secure. Retighten if necessary.
Smøring: The gas spring mechanism is maintenance-free. Do not attempt to lubricate internal components.

7. Feilsøking

If you encounter issues with your monitor stand, refer to the following common problems and solutions:

Problem	Mulig årsak	Løsning
Skjermen henger eller holder ikke posisjonen.	Screws are loose; monitor weight exceeds capacity; tilt mechanism not tightened.	Check and tighten all mounting screws. Ensure monitor weight is within the 7kg limit. Tighten the tilt adjustment screw.
Vanskeligheter med å justere høyden.	Gas spring mechanism needs to be reset or is stiff.	To lower the monitor, first push it up to its maximum height to release the mechanism, then gently push down to the desired position. Ensure the monitor is within the specified weight range for optimal gas spring function.
Skjermen er ikke i vater.	Uneven installation or VESA plate not perfectly aligned.	Check the VESA plate attachment to the monitor and the stand. Adjust the monitor's rotation slightly if possible to correct the level.
Stativet føles ustabilt.	Base not fully tightened; stand placed on an uneven surface.	Ensure the base screws are fully tightened. Place the stand on a flat, stable surface.

8. Produktspesifikasjoner

Detailed specifications for the RICOO TS4011 Monitor Stand:

Modell: TS4011
Kompatible skjermstørrelser: 17–32 tommer (43–81 cm)
Maksimal lastekapasitet: 7 kg (15.4 lbs)
VESA-kompatibilitet: 75x75 mm, 100x100 mm
Materiale: Legert stål, aluminium, jern, metall, plast
Farge: Svart
Bevegelsestype: Articulating, Swiveling, Tilting, Rotating, Height Adjustable
Vippevinkel: +/- 20 grader
Svingbar vinkel: +/- 45 grader
Rotasjon: 360 degrees (for VESA plate)
Høydejusteringsområde: Approximately 110 mm (from 352mm to 462mm, based on diagram)
Varevekt: 3.6 kg (7.9 lbs)
Monteringstype: Table Mount (Freestanding Base)

Image showing maximum weight capacity, screen size range, and VESA compatibility

Image: Visual summary of key specifications: Max 7kg load, 13"-32" screen size compatibility, and VESA 75x75 / 100x100 standards.

Technical diagram of RICOO TS4011 monitor stand with dimensions

Image: Detailed technical diagram of the TS4011 stand, showing all dimensions in millimeters, including height range, VESA plate size, and base measurements.

9. Garanti og støtte

Garanti: This product comes with a legal warranty of 24 months for new products, as per European Union regulations.

Støtte: For any further questions regarding our products, please do not hesitate to contact us. Our support team will be happy to assist you.

E-post: support@ricoo.de

RICOO is a registered trademark in Germany, certified by the European Union Intellectual Property Office, ensuring proven quality and reliability.

RICOO TS4011