Wera Bit-Check 30 Impaktor 2 Bit Set Instruction Manual

Introduksjon

This manual provides essential information for the safe and effective use of your Wera Bit-Check 30 Impaktor 2 bit set. Please read these instructions carefully before initial use and retain them for future reference. This set is designed for demanding applications, particularly with impact drivers, offering enhanced durability and resistance to extreme loads.

Produkt overview

The Wera Bit-Check 30 Impaktor 2 is a comprehensive set of screwdriver bits featuring Impaktor technology for extended service life. It comes with a robust Bit-Check holder designed for organized storage and easy access to the bits.

Komponenter inkludert

• 1 x 1/4"x75 Bit Holder
• 2 x PH 1x25 Phillips Bits
• 3 x PH 2x25 Phillips Bits
• 2 x PH 3x25 Phillips Bits
• 2 x PZ 1x25 PoziDriv Bits
• 3 x PZ 2x25 PoziDriv Bits
• 2 x PZ 3x25 PoziDriv Bits
• 3 x TX 25x25 Torx Bits
• 2 x TX 30x25 Torx Bits
• 2 x TX 40x25 Torx Bits
• 1 x TX 10x25 Torx Bit
• 1 x TX 15x25 Torx Bit
• 2 x TX 20x25 Torx Bits
• 1 x 3.0x25 Hex Bit
• 1 x 4.0x25 Hex Bit
• 1 x 5.0x25 Hex Bit
• 1 x 6.0x25 Hex Bit

An image showing the complete Wera Bit-Check 30 Impaktor 2 set, including the black Bit-Check case filled with various screwdriver bits and a separate Impaktor bit holder.

Oppsett

Pakker ut

Carefully remove all components from the packaging. Inspect the bits and holder for any signs of damage. Do not use damaged components.

Bit Insertion into Holder

1. Select the required bit type and size from the Bit-Check case.
2. Insert the hexagonal shank of the bit into the Impaktor bit holder. Ensure it is fully seated and securely held.
3. Insert the Impaktor bit holder into your impact driver or power tool.

A close-up image illustrating the Wera Impaktor bit holder with a bit securely inserted, demonstrating how it connects to a power tool.

Bruksanvisning

Generell bruk

The Wera Impaktor bits are specifically designed for use with impact drivers, offering enhanced durability and resistance to extreme loads. Follow these guidelines for optimal performance:

• Always select the correct bit type and size for the fastener to prevent damage to the fastener head and the bit.
• Apply firm, consistent pressure to the tool to keep the bit engaged with the fastener.
• Avoid excessive angling of the tool, which can lead to cam-out and premature wear.

An image depicting a person using an impact driver with a Wera bit set to fasten screws into a wooden surface, demonstrating typical application.

Impaktor Technology

The Impaktor technology utilizes a combination of material properties and geometric design, including a torsion zone, to absorb peak loads and extend the bit's lifespan, especially in impact applications. This significantly reduces the risk of premature bit breakage.

A cutaway diagram of a Wera Impaktor bit, highlighting the TriTorsion zone designed to absorb impact forces and prevent premature breakage.

An icon featuring an impact driver, signifying the 'Impact Proof' characteristic of the Wera Impaktor bits, indicating their suitability for high-impact applications.

Vedlikehold

Rengjøring

After use, wipe down bits and the holder with a clean, dry cloth to remove dirt, dust, and debris. Avoid using harsh chemicals or abrasive materials that could damage the bits or case.

Lagring

Store the Bit-Check set in a dry environment to prevent corrosion. The robust Bit-Check case provides excellent protection and organization for the bits, ensuring they are readily available for your next task.

Undersøkelse

Regularly inspect bits for signs of wear, such as rounded edges, chipped tips, or cracks. Replace worn or damaged bits immediately to ensure optimal performance, prevent damage to fasteners, and maintain safety.

Feilsøking

Bit Slipping / Cam-out

• Ensure the correct bit size and type is used for the fastener.
• Apply more consistent downward pressure on the tool to keep the bit engaged.
• Check if the bit is worn; replace if necessary.

Bit Breakage

• While Impaktor bits are highly durable, extreme misuse or incorrect application can still cause breakage. Ensure proper technique and bit selection.
• Verify that the bit is fully seated in the holder and the holder is correctly inserted into the tool.

Spesifikasjoner

Garanti og støtte

For warranty information and technical support, please refer to the official Wera website or contact your authorized Wera dealer. Keep your purchase receipt as proof of purchase.

Produsent: WERA

Modellnummer: 05057697001

Webnettsted: www.wera.de