1. Introduksjon
The Dualsky FC151 is a compact 6-axis flight control system designed for RC airplanes and quadcopters. It integrates a 3-axis gyroscope and a 3-axis accelerometer to provide advanced attitude stabilization. This manual provides essential information for the proper setup, operation, and maintenance of your FC151 unit.
Image 1.1: Dualsky FC151 Flight Control unit with indicated dimensions (36mm length, 27.5mm width, 12mm height).
2. Nøkkelfunksjoner
- 6-akset stabilisering: Combines 3-axis gyroscope and 3-axis accelerometer for precise flight control.
- Kompakt design: Mini dimension, weighing only 8 grams.
- Høy ytelse: Equipped with a 32-bit high-performance ARM MCU.
- Advanced Algorithm: Utilizes an original advanced attitude stabilization algorithm.
- Aircraft Compatibility: Supports single/double aileron, fly wing, and V-tail aircraft.
- Flaperon Mixing: Integrated support for flaperon mixing.
- Flymoduser: Supports aerobatic/3D airplanes and auto-level functionality.
- Justerbar følsomhet: Independent sensitivity adjustment for all 3 axes.
- S.BUS Support: Compatible with Futaba S.BUS protocol.
- Modusbytte: Allows mode switching via an extra channel.
- Enkel programmering: Programmed via a single button and LED indicators.
- HV Input Support: Compatible with High Voltage (HV) inputs.
3. Pakkens innhold
Når du åpner pakken, må du kontrollere at alle komponenter er til stede og uskadet:
- Dualsky FC151 Flight Control Unit
- Connecting Cables (if included, not explicitly listed but implied for installation)
- Bruksanvisning (dette dokumentet)
Image 3.1: The Dualsky FC151 Flight Control unit shown within its retail packaging.
4. Oppsett og installasjon
4.1 Fysisk installasjon
Mount the FC151 unit securely in your RC aircraft or quadcopter. Ensure it is oriented correctly according to the "HEAD DIRECTION" arrow on the unit. The compact size allows for flexible placement, but avoid areas with excessive vibration or electromagnetic interference.
Bilde 4.1: Topp view of the FC151 unit, highlighting the 'HEAD DIRECTION' indicator and adjustment points for AIL, ELE, RUD.
4.2 Kablingstilkoblinger
Connect the FC151 to your receiver and servos using appropriate cables. The unit features clearly labeled ports for system power (SYS), aileron (AIL1, AIL2), elevator (ELE), rudder (RUD), and mode selection (MODE). If using S.BUS, refer to your receiver's manual for proper connection to the FC151's S.BUS port.
Image 4.2: The FC151 unit displaying its various input and output ports for connection to a receiver and servos.
4.3 Control Surface Types and Mixing
The FC151 supports various aircraft configurations. Ensure your transmitter is set up correctly for the chosen aircraft type, and then configure the FC151 accordingly. The unit supports:
- Single Aileron Aircraft
- Double Aileron Aircraft
- Fly Wing Aircraft (Delta Wing)
- V-Tail Aircraft
Flaperon mixing is also supported. Refer to the diagram below for visual guidance on control surface configurations.
Image 4.3: Diagram showing typical control surface setups for single/double aileron, V-tail, and fly wing aircraft.
4.4 Følsomhetsjustering
The FC151 allows independent sensitivity adjustment for aileron (AIL), elevator (ELE), and rudder (RUD) axes. Use a small screwdriver to carefully adjust the potentiometers labeled AIL, ELE, and RUD on the top of the unit. Start with lower sensitivity settings and gradually increase as needed during test flights to achieve desired stability without overcorrection.
4.5 Valg av flymodus
The FC151 supports different flight modes, including auto-level and modes suitable for aerobatic/3D flying. These modes can be switched via an extra channel on your transmitter, connected to the FC151's MODE input. Consult the LED indicators for current mode status.
5. Drift
Once installed and configured, the FC151 will provide stabilization during flight. The system continuously monitors the aircraft's attitude and makes rapid corrections to maintain stability. For advanced users, programming via the onboard button and LEDs allows for fine-tuning of parameters. Refer to the specific programming sequence detailed in the full product manual (if available) or Dualsky's official webnettsted for detaljerte trinn.
Ensure your transmitter is properly calibrated and all control surfaces respond correctly before attempting flight.
6. Vedlikehold
- Rengjøring: Hold enheten ren og fri for støv og rusk. Bruk en myk, tørr klut til rengjøring.
- Undersøkelse: Kontroller alle ledningsforbindelser med jevne mellomrom for løse eller skadede deler.
- Miljøforhold: Unngå å utsette enheten for ekstreme temperaturer, fuktighet eller direkte sollys over lengre perioder.
- Fastvare: Check the Dualsky official webnettstedet for tilgjengelige fastvareoppdateringer.
7. Feilsøking
| Problem | Mulig årsak | Løsning |
|---|---|---|
| No power to FC151 | Incorrect wiring, faulty power source, damaged cable. | Check all power connections. Ensure battery is charged. Inspect cables for damage. |
| Unstable flight / Overcorrection | Sensitivity too high, incorrect mounting, vibration. | Reduce sensitivity settings. Re-mount the unit securely. Check for excessive vibrations. |
| Incorrect control response | Incorrect servo direction, wrong aircraft type selected, faulty servo. | Verify servo directions in transmitter. Confirm correct aircraft type setting on FC151. Test servos independently. |
| Modusbytte fungerer ikke | Extra channel not configured, incorrect wiring to MODE input. | Ensure transmitter channel is assigned and connected correctly to the FC151 MODE input. |
8. Spesifikasjoner
| Trekk | Detalj |
|---|---|
| Merke | Dualsky |
| Modellnavn | FC151 |
| Kontroll Type | 6-Axis (3-axis Gyro + 3-axis Accelerometer) |
| MCU | 32-biters ARM |
| Vekt | 8 grams (approximate, based on description) |
| Dimensjoner | 36 mm x 27.5 mm x 12 mm (omtrentlig, basert på bildet) |
| Støttede fly | Single/Double Aileron, Fly Wing, V-Tail |
| Protokoller | Futaba S.BUS |
| Inngang Voltage | Supports HV inputs (specific voltage range not provided) |
| UPC | 782911429230 |
9. Garanti og støtte
For warranty information, please refer to the official Dualsky website or contact your authorized Dualsky dealer. Product support and additional resources, including detailed programming guides, may be available on the manufacturer's webnettsted:
For specific inquiries or technical assistance, please contact Dualsky customer service.
The GTIN/UPC for this product is 6941047114364.