FLEXISPOT EN2 Electric Standing Desk User Manual

1. Viktig sikkerhetsinformasjon

Les alle instruksjonene nøye før montering og bruk. Unnlatelse av å følge disse instruksjonene kan føre til personskade eller skade på produktet.

• Dette skrivebordet er kun designet for innendørs bruk.
• Ensure all screws are tightened securely before use. Periodically check and re-tighten all fasteners.
• Do not overload the desk. The maximum weight recommendation is 176 pounds (80 kg).
• Hold barn og kjæledyr unna skrivebordet under bruk.
• Avoid placing the desk in direct sunlight or in damp miljøer.
• Do not disassemble or modify the desk's electrical components. Contact customer support for service.

Warning: The product will arrive in two separate packages and may be shipped separately. Do not discard any packaging until assembly is complete and the desk is fully functional.

2. Pakkens innhold

Your FLEXISPOT EN2 Electric Standing Desk is shipped in two packages. Please ensure you have received both packages before beginning assembly.

• Pakke 1: Desktop (48" Mahogany Top)
• Pakke 2: Desk Frame (Gray Frame), Motor, Control Panel, Power Strip, Cable Management Tray, Hardware, and User Manual.

Figure 2.1: The FlexiSpot EN2 desk components are shipped in two separate packages for safe delivery.

3. Oppsett og montering

Assembly typically requires one person and approximately 30-60 minutes. An electric drill (not included) may be helpful for certain steps.

1. Pakk ut komponenter: Carefully remove all parts from both packages and lay them out on a soft, clean surface to prevent scratches. Verify all components are present against the packing list.
2. Montering av skrivebordsramme: Attach the lifting columns to the feet. Ensure the crossbeam is correctly oriented.
3. Attach Crossbeam: Secure the crossbeam to the lifting columns. Note that while some holes are pre-drilled for legs, the center holes for the crossbeam and cable tray may require self-tapping screws. Apply firm pressure with an electric drill for easy installation.
4. Install Motors and Control Box: Follow the manual to connect the motor cables to the control box and secure the control box to the frame.
5. Legg ved skrivebordet: Carefully place the desktop onto the assembled frame. Align the pre-drilled holes on the desktop with the frame and secure with screws.
6. Installer kontrollpanel og strømskinne: Mount the 6-button digital control panel and the clamp-on power strip to the desired location on the desktop. The power strip can be clipped to the back or side.
7. Kabeladministrasjon: Utilize the included cable management device to organize and secure all power and data cables underneath the desk. This helps prevent cables from snagging during height adjustments.

Figure 3.1: Assembled FLEXISPOT EN2 Electric Standing Desk.

Figure 3.2: Effective cable management keeps your workspace tidy and safe.

4. Bruksanvisning

The desk features a 6-button digital controller for easy height adjustment and memory presets.

4.1 Høydejustering

• Løft skrivebordet: Press and hold the 'Up' arrow button (▲) to raise the desk. The LED display will show the current height.
• Nedre skrivebord: Press and hold the 'Down' arrow button (▼) to lower the desk. The LED display will show the current height.
• The motorized system adjusts smoothly from 28.1 inches to 45.7 inches. The motor operates quietly at less than 50 dB.

4.2 Forhåndsinnstillinger for minne

The controller features 4 programmable memory presets to quickly switch between your preferred sitting and standing heights.

1. Adjust the desk to your desired height using the Up/Down arrow buttons.
2. Trykk på «M»-knappen (minne). Displayet vil vise «S-».
3. Press one of the number buttons (1, 2, 3, or 4) within 3 seconds. The display will show 'S-1', 'S-2', etc., indicating the height is saved to that preset.
4. For å hente frem en lagret høyde, trykker du ganske enkelt på den tilsvarende tallknappen (1, 2, 3 eller 4). Skrivebordet vil automatisk flytte seg til den lagrede posisjonen.

4.3 Integrated Power Strip and USB Ports

The desktop is equipped with a removable power strip for convenient device charging and power access.

• The power strip includes 3 AC outlets (125V/12A) and 2 USB charging ports (5V/2A).
• It can be clipped to the back or side of your desk to suit your setup.

Figure 4.1: Digital control panel for height adjustment and memory presets.

Figure 4.2: Integrated power strip with AC outlets and USB charging ports.

4.4 Timer Function (if available on your model)

Some models may include a timer function to remind you to switch between sitting and standing positions. Refer to your specific model's manual for details on setting and using this feature.

5. Funksjoner

• Desktop i hele stykke: The 1-inch eco-friendly desktop provides a seamless and spacious work surface, offering enhanced stability compared to multi-piece desktops.
• Slitesterk konstruksjon: Constructed with an industrial-grade steel frame and solid tabletop, the desk can support up to 176 pounds (80 kg). Each frame undergoes rigorous testing for performance and durability.
• Avrundede hjørner: The desktop features rounded corners for safety and to prevent accidental bumps or damage.
• Stille drift: The motor operates at less than 50 dB, ensuring a quiet work environment during height adjustments.

Figure 5.1: The whole-piece desktop offers enhanced stability and a smooth surface.

Figure 5.2: The desk operates with a quiet motor, producing less than 50 dB of noise.

Figure 5.3: The desk's robust construction supports up to 176 lbs.

6. Vedlikehold

• Rengjøring: Tørk av skrivebordet og rammen med en myk klutamp klut. Unngå skurende rengjøringsmidler eller sterke kjemikalier som kan skade finishen.
• Undersøkelse: Sjekk regelmessig alle skruer og bolter for å sikre at de er stramme. Stram til om nødvendig.
• Kabeladministrasjon: Ensure cables remain neatly organized and are not pinched or strained during height adjustments.

7. Feilsøking

• Skrivebordet beveger seg ikke: Check all cable connections, especially the power cord and motor cables. Ensure the power outlet is functional.
• Ujevn bevegelse: Perform a reset procedure (refer to the full user manual for specific steps). Ensure the desk is not overloaded or obstructed.
• Feilkoder: If an error code appears on the LED display, consult the comprehensive user manual for specific troubleshooting steps related to that code.

8. Spesifikasjoner

Figure 8.1: Key dimensions and features of the FLEXISPOT EN2 desk.

9. Garanti og støtte

FLEXISPOT provides comprehensive warranty coverage for your EN2 Electric Standing Desk:

• 5 års garanti: Applies to frames, motors, and other mechanical devices.
• 2 års garanti: Applies to controllers, switches, and electronics.

For customer support, troubleshooting assistance, or warranty claims, please visit the official FLEXISPOT webnettstedet eller kontakt kundeserviceavdelingen deres direkte.

10. Offisielle produktvideoer