NiteRider Lumina Micro 900

NiteRider Lumina Micro 900 Front Bike Light Instruction Manual

Produkt overview

The NiteRider Lumina Micro 900 is a compact and lightweight front bike light designed for various cycling conditions, including mountain, road, commuting, and urban environments. It features a powerful 900-lumen output, USB rechargeability, and water resistance, ensuring visibility and safety during your rides.

Key features include a Lock Mode to prevent accidental activation, Intellicharge technology for faster charging, and a durable DuPont fiberglass reinforced nylon housing. The light offers five distinct modes to adapt to different lighting needs and optimize battery life.

NiteRider Lumina Micro 900 bike light, a compact and lightweight front cycling light.

Image: NiteRider Lumina Micro 900 compact front bike light.

Hva er inkludert

  • LED-lyshode
  • Internt Li-Ion-batteri
  • Styret Clamp Mount (fits up to 35mm)
  • USB ladekabel

Oppsett og installasjon

The NiteRider Lumina Micro 900 comes with a handlebar clamp mount for easy installation. This mount is designed to fit standard and oversized 35mm handlebars.

  1. Attach the Handlebar Mount: Sikre styret clamp mount to your bicycle's handlebar. Ensure it is tightened sufficiently to prevent movement during rides.
  2. Slide in the Light Head: Slide the LED light head onto the handlebar mount until it clicks securely into place. The quick-release tab allows for convenient removal and installation.
  3. Juster vinkel: Adjust the angle of the light to ensure optimal illumination of your path without blinding oncoming traffic.
NiteRider bike light mounted on handlebars.

Image: NiteRider light securely mounted on bicycle handlebars.

Bruksanvisning

Lock Mode Operation

The Lumina Micro 900 features a Lock Mode to prevent accidental power-on during transport or storage, conserving battery life. The light is set to Lock Mode at the factory.

To Unlock the Light:

  1. Trykk og hold inne av/på-knappen i omtrent 7–10 sekunder.
  2. The LED indicator in the switch will change from red to blue, indicating the light is unlocked.
  3. Press and release the power button again to turn the light on.

To Lock the Light:

  1. With the light on, press and hold the power button for approximately 7-10 seconds.
  2. The light will cycle through flash modes and then turn off, with the LED indicator turning red, signifying it is now in Lock Mode.

Video: Instructions on how to unlock the NiteRider Lumina light when the button is lighting up red.

Video: Demonstrates how to unlock Lumina Series lights that are factory-locked for safety.

Light Modes and Run Times

The Lumina Micro 900 offers five distinct lighting modes:

  • Low Steady: 200 lumens @ 11:00 hours
  • Medium: 450 lumens @ 4:30 hours
  • Høy: 900 lumens @ 2:00 hours
  • Safety Flash: @ 11:00 hours
  • Gåmodus: 30 lumens @ 60:00 hours

Lader lyset

The Lumina Micro 900 is USB rechargeable. The Intellicharge™ feature reduces charging time, allowing you to spend more time riding.

  • Connect the provided USB charging cable to the light and a power source (e.g., computer, USB wall adapter) outputting over 500 mA.
  • The typical charge time is 2 hours and 30 minutes.
NiteRider Lumina Micro 900 showing USB charging port and charge time.

Image: NiteRider Lumina Micro 900 highlighting USB charging and charge time.

Batterinivåindikator

The power button doubles as a battery level indicator:

  • Blått lys: Indicates a good battery level remaining.
  • Rødt lys: Indicates the battery level is below 20% remaining.

Vedlikehold

  • Rengjøring: Tørk av lyset med en myk, damp klut for å fjerne skitt og rusk. Unngå bruk av sterke kjemikalier eller slipende materialer.
  • Lagring: Store the light in a cool, dry place when not in use. If storing for an extended period, ensure the battery is partially charged (around 50%) and recharge every few months to maintain battery health.
  • Vannmotstand: The light is water resistant (IP64 rated). While it can withstand splashes and light rain, avoid submerging it in water. Ensure the USB port cover is securely closed to maintain water resistance.

Feilsøking

  • Lyset slår seg ikke på: If the light does not turn on, it may be in Lock Mode. Refer to the "Lock Mode Operation" section to unlock the device. Ensure the battery is charged.
  • Kort kjøretid: Ensure the light is fully charged before use. Battery performance can decrease over time and in cold temperatures.
  • Ladeproblemer: Verify the USB cable is properly connected and the power source is functioning. If the light still doesn't charge, try a different USB cable or power source.

Spesifikasjoner

TrekkDetalj
ModellnavnNiteRider Lumina Micro 900 LED Front Bike Headlight
Maksimal lysutgang900 lumen
Antall innstillinger5 (Low Steady, Medium, High, Safety Flash, Walk Mode)
StrømkildeBattery Powered (Internal Li-Ion)
Ladetid2:30 hours (with >500 mA power source)
VannmotstandsnivåIP64 (vannbestandig)
Varevekt130 grams (light head + handlebar mount)
MaterialeDuPont fiberglass reinforced nylon housing
MonteringstypeHandlebar Mount (up to 35mm)
Diagram showing the dimensions of the NiteRider Lumina Micro Series light.

Image: Lumina Micro Series light dimensions.

Garanti og støtte

NiteRider offers comprehensive warranty coverage for the Lumina Micro 900:

  • Begrenset livstidsgaranti: Covers defects in mechanical components (housings, covers, mounts, fasteners) and LEDs.
  • 2 års garanti: Covers printed circuit boards, switches, and AC adapters.
  • 1 års garanti: Covers rechargeable battery cells.

For further support or warranty claims, please visit the official NiteRider webnettstedet eller kontakt deres kundeservice.

Du finner mer informasjon og produkter på NiteRider Store.