Wellue Bluetooth blodtrykksmåler BP2A brukerhåndbok

1. Introduksjon

This manual provides essential instructions for the safe and effective use of your Wellue Bluetooth Blood Pressure Monitor BP2A. This device is designed for home use to measure systolic blood pressure (SYS), diastolic blood pressure (DIA), mean arterial pressure (MAP), pulse rate, and pulse pressure. It also features an ECG function for additional heart health monitoring. Please read this manual thoroughly before first use and retain it for future reference.

2. Viktig sikkerhetsinformasjon

• Consult your physician before using this device for any medical condition. Self-diagnosis and treatment based on measurements can be dangerous.
• Denne enheten er kun beregnet for hjemmebruk av voksne. Den er ikke beregnet for bruk på spedbarn, barn eller gravide kvinner.
• Do not use this device in conjunction with high-frequency surgical equipment.
• Hold enheten utilgjengelig for barn og kjæledyr.
• Ikke demonter eller forsøk å reparere enheten. Overlat all service til kvalifisert personell.
• Avoid strong electromagnetic fields during use, as they may interfere with the device's operation.
• Uttalelser angående kosttilskudd har ikke blitt evaluert av FDA og er ikke ment å diagnostisere, behandle, kurere eller forhindre noen sykdom eller helsetilstand.

3. Pakkens innhold

Kontroller at alle varene er til stede når du åpner pakken:

• Wellue Bluetooth Blood Pressure Monitor BP2A (integrated with cuff)
• USB ladekabel
• Brukerhåndbok

4. Enhet overview

The Wellue BP2A monitor features a compact, one-piece design for ease of use and portability. It includes an integrated arm cuff, a digital display, and control buttons.

Figure 4.1: Wellue BP2A Blood Pressure Monitor and ViHealth App Interface.

Figure 4.2: Key features of the Wellue BP2A monitor, including Bluetooth connectivity, FDA clearance, rechargeable battery, and built-in memory for 50 readings.

5. Oppsett

5.1 Lading av enheten

Before initial use, fully charge the device using the provided USB cable. Connect the cable to the monitor's charging port and a standard USB power adapter (not included). A full charge can provide power for up to 300 measurements.

5.2 Installering av ViHealth-appen

The Wellue BP2A works with the free ViHealth app, available for iOS and Android devices. Søk etter "ViHealth" in your device's app store and install it.

Figure 5.1: The ViHealth app for Android and iOS, used to track blood pressure and heart measurements.

5.3 Bluetooth-paring

Ensure Bluetooth is enabled on your smartphone. Open the ViHealth app. Turn on the Wellue BP2A monitor. The device should automatically connect to the app. Follow any on-screen prompts within the app to complete the pairing process.

6. Bruksanvisning

6.1 Riktig plassering av mansjetten

Accurate measurement depends on correct cuff placement. Ensure the cuff is placed directly on your bare upper arm, 1-2 cm above the elbow joint. The air tube (if applicable, though this is a one-piece design, the sensor area should be aligned) should be positioned over the brachial artery. The cuff should fit snugly but not too tightly. Refer to the diagram below for guidance.

Figure 6.1: Correct cuff placement for accurate blood pressure measurement.

6.2 Foreta en blodtrykksmåling

1. Sitt komfortabelt med ryggen støttet og føttene flatt på gulvet. Hvil armen på et bord slik at mansjetten er i hjertehøyde.
2. Ensure the device is powered on and, if desired, connected to the ViHealth app.
3. Trykk på Start/stopp button on the device. The cuff will begin to inflate.
4. Forbli stille og taus under målingen.
5. Once complete, your blood pressure readings (SYS, DIA, MAP, Pulse Rate, Pulse Pressure) will be displayed on the device screen and automatically uploaded to the ViHealth app if connected.

Figure 6.2: User taking a blood pressure measurement with the Wellue BP2A monitor.

6.3 Taking an ECG Measurement

The device also supports ECG measurements. To take an ECG:

1. Ensure the device is powered on and connected to the ViHealth app.
2. Hold the device with both hands, placing your thumbs on the designated electrodes (usually the metal strips on the sides or top of the device).
3. Remain still and relaxed for the duration of the measurement (typically 30 seconds).
4. The ECG waveform and heart rate will be displayed on the device and recorded in the app.

Figure 6.3: Real-time recording of ECG values using the Wellue BP2A monitor.

6.4 Using the ViHealth App for Data Management

The ViHealth app allows you to:

• View real-time readings during measurement.
• Access historical data and trends for multiple users.
• Generate and share PDF/CSV reports with healthcare providers.
• Track both blood pressure and ECG data in one place.

Figure 6.4: Sharing EKG reports generated by the ViHealth app.

7. Vedlikehold

7.1 Rengjøring

Wipe the device and cuff with a soft, dry cloth. If necessary, use a cloth lightly dampened with water or a mild disinfectant. Do not immerse the device in water or use abrasive cleaners.

7.2 Oppbevaring

Oppbevar enheten på et kjølig og tørt sted, unna direkte sollys og ekstreme temperaturer. Oppbevar den i originalemballasjen eller et beskyttende etui når den ikke er i bruk.

7.3 Batteristell

To prolong battery life, charge the device regularly, even if not used frequently. Avoid fully discharging the battery for extended periods.

8. Feilsøking

9. Spesifikasjoner

• Modellnavn: Armfit Plus
• Varemodellnummer: BP2A
• Merke: Vel
• Mansjettestørrelse: 8.7–16.5 tommer (22–42 cm)
• Strømkilde: Batteridrevet (1 litiumionbatteri, inkludert)
• Visningstype: Digital
• Produktdimensjoner: 5.9 cm L x 1.9 cm B x 1.18 cm Tykkelse
• Vekt: Omtrent 15.84 gram
• Tilkobling: Bluetooth
• Hukommelse: Built-in memory for 50 sets of readings

10. Garanti og støtte

For warranty information and technical support, please refer to the official Wellue webnettstedet eller kontakt kundeservicen deres direkte. Ta vare på kjøpskvitteringen som kjøpsbevis for garantikrav.