SIIG 4K DisplayPort 2-Port KVM Switch User Manual

1. Introduksjon

The SIIG 4K DisplayPort 2-Port KVM Switch (Model: CE-DP0F11-S1) allows you to control two DisplayPort 1.2 computers using a single set of keyboard, mouse, and monitor. This device supports 4K video resolution at 60Hz, USB 3.0 peripherals, and audio/microphone connections, enhancing productivity and workspace organization.

Image: The KVM switch facilitates efficient switching between multiple 4K UHD devices using front panel buttons or keyboard hotkeys.

2. Produktet er overview

2.1 Frontpanel

The front panel provides convenient access for switching between connected computers and connecting USB peripherals.

• PC Switch Buttons (PC1, PC2): Press these buttons to manually switch control between Computer 1 and Computer 2.
• USB 3.0-porter (x2): Connect USB 3.0 devices such as flash drives, external hard drives, or other high-speed peripherals.

2.2 Bakpanel

The rear panel houses all the primary connection ports for your computers, monitor, keyboard, mouse, and audio devices.

• DC 12V strømkontakt: Koble til den medfølgende strømadapteren her.
• Strøm LED: Indicates the power status of the KVM switch.
• Micro USB Port (FW): Brukes til fastvareoppdateringer.
• USB 3.0-porter (x2): Connect additional USB 3.0 peripherals.
• Lydutgang (3.5 mm): Connect speakers or headphones.
• Mic In (3.5mm): Koble til en mikrofon.
• PC1/PC2 DisplayPort In (x2): Connect DisplayPort cables from Computer 1 and Computer 2.
• PC1/PC2 USB 3.0 / Mic / Audio (x2): Connect USB 3.0 cables and audio/mic cables from Computer 1 and Computer 2.
• DisplayPort-utgang: Connect your monitor's DisplayPort cable here.
• DIP-bryter: Used for signal level enhancement (EQ settings).
• Keyboard/Mouse Port (USB 2.0): Dedikerte USB-porter for tilkobling av tastatur og mus.

Image: Detailed diagram of the KVM switch's front and rear panel connections.

3. Installasjonsinstruksjoner

Follow these steps to set up your SIIG 4K DisplayPort 2-Port KVM Switch:

1. Slå av enheter: Ensure both computers and your monitor are powered off before making any connections.
2. Koble til skjermen: Koble DisplayPort-skjermen til DisplayPort-utgang porten på bakpanelet på KVM-svitsjen.
3. Koble til tastatur og mus: Connect your USB keyboard and mouse to the dedicated Keyboard/Mouse Port (USB 2.0) on the rear panel.
4. Koble til datamaskiner (PC1 og PC2):
   • Connect a DisplayPort cable from Computer 1 to the PC1 DisplayPort In port. Repeat for Computer 2 to PC2 DisplayPort In.
   • Connect a USB 3.0 cable from Computer 1 to the PC1 USB 3.0 / Mic / Audio port. Repeat for Computer 2 to PC2 USB 3.0 / Mic / Audio.
5. Koble til lydenheter: If using external speakers/headphones and a microphone, connect them to the Lyd ut og Mikrofon inn portene på bakpanelet.
6. Koble til USB-tilbehør: Connect any additional USB 3.0 peripherals (e.g., printer, flash drive) to the USB 3.0-porter on either the front or rear panel.
7. Strøm på: Koble den medfølgende strømadapteren til DC 12V strømuttak and then plug it into a power outlet. The Power LED will illuminate.
8. Power On Computers & Monitor: Power on your computers and monitor. The KVM switch should automatically detect the active computer.

Image: The KVM switch allows connection of various devices including keyboard, mouse, USB peripherals, headphones, microphone, and a display.

4. Bruksanvisning

4.1 Bytte mellom datamaskiner

You can switch between connected computers using two methods:

• Trykknapper på frontpanelet: Trykk på PC1 or PC2 button on the front panel to switch to the corresponding computer. The LED indicator will show which computer is active.
• Tastatur hurtigtaster: Use the following hotkey sequence on your connected keyboard:
  [Scroll Lock] + [Scroll Lock] + [Number] + [Enter]
  Bytt ut [Antall] with '1' for PC1 or '2' for PC2. For example, to switch to PC1, press Scroll Lock twice, then '1', then Enter.

4.2 Auto-Scan Feature

The KVM switch supports an auto-scan feature for quick browsing and system monitoring.

• Activate Auto-Scan: Press the hotkey sequence:
  [Rullelås] + [Rullelås] + [S]
  This will initiate an automatic scan, cycling through the connected computers.
• Exit Auto-Scan: Press any key to stop the auto-scan function.

4.3 Signal Level Enhancement (EQ)

The DIP switch on the rear panel allows for signal level enhancement (EQ) to optimize DisplayPort signal quality, especially with longer cables or specific display setups. Refer to the product's full manual for detailed settings and recommendations for the DIP switch positions.

5. Nøkkelfunksjoner

• High-Performance Workstation: Control two DisplayPort 1.2 computers with a single keyboard, mouse, and monitor.
• Overlegen videokvalitet: Supports resolutions up to 3840x2160 @60Hz YUV 4:4:4 8-bit, 3D, and Deep Color.
• MST Passthrough: Allows for multiple displays when supported by the connected graphics card and monitor.
• Høy båndbredde: Offers a true 21.6Gbps video bandwidth.
• Advanced Audio Support: Supports 7.1ch surround sound or stereo audio, including PCM, DTS-HD, Dolby Digital, and Dolby TrueHD.
• Flere USB-porter: Features 4x USB 3.0 Type-A ports for various USB peripherals (flash drives, printers) and 2x USB 1.1 ports for keyboard and mouse.
• Hotkey & Push Button Control: Easy switching between computers via front panel buttons or USB keyboard hotkeys.
• Fastvareoppdatering: Includes a Micro USB port for future firmware updates.
• Robust konstruksjon: Durable metal housing for enhanced longevity and ESD protection.
• TAA-kompatibel: Meets Trade Agreements Act requirements.

Image: The KVM switch supports a true 21.6Gbps video bandwidth and 7.1 channel surround sound or stereo audio.

Image: The KVM switch features a sturdy metal construction.

Image: The KVM switch is TAA Compliant.

6. Vedlikehold

• Rengjøring: Bruk en myk, tørr klut til å rengjøre enheten. Unngå flytende rengjøringsmidler eller løsemidler.
• Fastvareoppdateringer: Periodically check the SIIG website for available firmware updates to ensure optimal performance and compatibility. Firmware updates can be applied via the Micro USB port on the rear panel.
• Kabeladministrasjon: Ensure all cables are securely connected and organized to prevent accidental disconnections or damage.

7. Feilsøking

Hvis du støter på problemer med KVM-svitsjen din, kan du se følgende vanlige feilsøkingstrinn:

• Ingen visning:
  • Ensure all DisplayPort cables are securely connected between the computers, KVM, and monitor.
  • Kontroller at skjermen er slått på og satt til riktig inngangskilde.
  • Try restarting the KVM switch and computers.
  • Check the DIP switch settings for signal level enhancement.
• Tastatur/mus svarer ikke:
  • Ensure the keyboard and mouse are connected to the dedicated Keyboard/Mouse Port på bakpanelet.
  • Prøv å koble tastaturet/musen direkte til datamaskinen for å bekrefte at de fungerer.
  • Some advanced gaming keyboards/mice may require direct connection to a computer or may not fully support KVM hotkeys. Use the front panel buttons for switching if hotkeys are problematic.
• USB Peripherals Not Detected:
  • Ensure the USB 3.0 cables from the computers are connected to the KVM's PC1/PC2 USB 3.0 / Mic / Audio havner.
  • Try connecting the peripheral to a different USB port on the KVM or directly to the computer.
• Ingen lyd/mikrofon:
  • Kontroller at lydkablene er riktig koblet til Lyd ut og Mikrofon inn ports on the KVM and to your speakers/headphones/microphone.
  • Check audio settings on your operating system to ensure the correct output/input device is selected.

8. Spesifikasjoner

9. Garanti og støtte

9.1 Garantiinformasjon

This SIIG KVM Switch is backed by a 3 års garantiDenne garantien dekker material- og produksjonsfeil ved normal bruk. Vennligst ta vare på kjøpsbeviset for garantikrav.

9.2 Technical Support & Firmware Upgrades

SIIG provides continuous service for firmware upgrades to ensure your product performs at its best for an extended period. For technical assistance, updated drivers, or the latest firmware, please visit the official SIIG webnettstedet eller kontakt deres kundestøtte.