ABSINA 301001

ABSINA Battery Charger X4 (Model 301001) - Instruction Manual

Comprehensive guide for safe and efficient use of your ABSINA Battery Charger.

1. Introduksjon

Thank you for choosing the ABSINA Battery Charger X4. This device is designed for charging NiMH and NiCd rechargeable batteries of sizes AA, AAA, and 9V. Please read this manual carefully before first use to ensure proper operation and to prevent damage to the charger or batteries.

ABSINA Battery Charger X4

Image 1.1: The ABSINA Battery Charger X4, a compact black unit with four charging slots and LED indicators, designed for various battery types.

2. Viktige sikkerhetsinstruksjoner

Always follow these basic safety precautions when using the battery charger:

  • This charger is designed exclusively for NiMH and NiCd rechargeable batteries. Do not attempt to charge non-rechargeable batteries or other battery types (e.g., Alkaline, Lithium-ion), as this may lead to explosion, rupture, or leakage, causing personal injury or property damage.
  • Use the charger only indoors and in dry conditions. Do not expose it to rain, moisture, or extreme temperatures.
  • Sørg for tilstrekkelig ventilasjon under lading. Ikke dekk til laderen.
  • Ikke demonter eller modifiser laderen. Overlat all service til kvalifisert personell.
  • Hold laderen utilgjengelig for barn og kjæledyr.
  • Trekk laderen ut av stikkontakten når den ikke er i bruk eller før rengjøring.
  • If the charger or power cord is damaged, discontinue use immediately.
  • Insert batteries with correct polarity (+/-). Incorrect insertion can cause damage.

3. Pakkens innhold

Pakken skal inneholde følgende elementer:

  • 1 x ABSINA Battery Charger X4 (Model 301001)
  • 1 x bruksanvisning (dette dokumentet)

Note: Batteries are not included with the charger.

4. Produktfunksjoner

The ABSINA Battery Charger X4 offers advanced features for efficient and safe battery charging:

  • Kompatibilitet med flere batterier: Charges 1-4 Micro AAA, 1-4 Mignon AA, or 1-2 E-block 9V NiMH/NiCd batteries simultaneously.
  • Single Bay Monitoring: Each charging slot is monitored independently, allowing for optimal charging of individual batteries.
  • Battery Full Detection: Automatically detects when batteries are fully charged and switches to pulse trickle charge to maintain capacity.
  • Battery Defect Detection: Identifies defective batteries immediately upon insertion.
  • Reparasjonsmodus: Features a gentle pre-charge and reduced charging current for deeply discharged batteries.
  • Rask lading: Microcontroller-monitored charging control allows for charging within approximately 2 hours (varies by battery capacity).
  • Multiple Overcharge Protection: Ensures battery safety and longevity.
  • LED-statusindikator: Provides clear visual feedback on the charging status of each battery.
  • Automatisk avslutning: The charger automatically switches off or to trickle charge once batteries are fully charged.
Battery types supported by ABSINA Charger

Image 4.1: Illustration showing the charger's compatibility with 1-4 AAA cells, 1-4 AA cells, and 1-2 9V cells.

ABSINA Charger LED Status Indicator

Image 4.2: Close-up of the charger's LED status indicators, showing green lights for charging/charged batteries and a red light for a defective battery.

ABSINA Charger Defective Battery Detection

Image 4.3: The charger indicating a defective battery with a red LED, demonstrating its fault detection feature.

5. Oppsett

  1. Pakk ut laderen: Carefully remove the ABSINA Battery Charger X4 from its packaging. Inspect it for any signs of damage.
  2. Velg en plassering: Place the charger on a flat, stable, and non-flammable surface. Ensure the area is well-ventilated and away from direct sunlight, heat sources, or moisture.
  3. Koble til strøm: Plug the charger directly into a standard AC power outlet (100-240V AC, 50-60Hz). The charger is designed for worldwide use.

6. Bruksanvisning

Follow these steps to charge your rechargeable batteries:

  1. Sett inn batterier: Insert 1 to 4 AA or AAA NiMH/NiCd batteries, or 1 to 2 9V NiMH/NiCd batteries into the corresponding charging slots. Ensure correct polarity (+ and -) as indicated on the charger and batteries.
  2. Automatic Charging Start: The charger will automatically detect the battery type and begin the charging process. The LED indicator for each slot will illuminate green, indicating active charging. If a red LED appears, the battery is defective (refer to Troubleshooting).
  3. Ladestatus:
    • Grønn LED (fast): Batteriet lades.
    • Green LED (Solid, after charging): Battery is fully charged and the charger has switched to trickle charge.
    • Red LED (Solid): Defective battery detected. Remove the battery.
  4. Ladetid: Charging time varies depending on the battery capacity and discharge level. For typical AA batteries (2500mAh), charging can take approximately 2 hours. Refer to the "Charging Time Table" in the Specifications section for estimates.
  5. Ta ut batterier: Once the LED indicator for a battery turns solid green (indicating full charge), you can remove the battery. The charger will automatically stop charging that specific slot.
ABSINA Charger Simple Operation

Image 6.1: The charger with batteries inserted, highlighting its straightforward operation without unnecessary buttons.

ABSINA Charger 2 Hour Charging Time

Image 6.2: Visual representation of the approximate 2-hour charging time for certain battery types.

ABSINA Charger Auto-Off Feature

Image 6.3: The charger's auto-off function after charging is complete, conserving energy and preventing overcharge.

7. Vedlikehold

  • Rengjøring: Koble laderen fra stikkontakten før rengjøring. Bruk en myk, tørr klut til å tørke av utsiden av laderen. Ikke bruk flytende rengjøringsmidler eller løsemidler.
  • Lagring: Oppbevar laderen på et kjølig, tørt sted når den ikke er i bruk.
  • Unngå hindringer: Ensure that the charging slots and ventilation openings are free from dust and debris.

8. Feilsøking

ProblemMulig årsakLøsning
Charger not working / No LEDs light up.Ingen strømforsyning.Sørg for at laderen er ordentlig koblet til en strømførende stikkontakt.
Red LED lights up for a battery.Defective battery or incorrect battery type.Remove the battery. This charger is only for NiMH/NiCd rechargeable batteries. If it's a NiMH/NiCd battery, it may be permanently damaged and needs replacement.
Batteries do not charge fully or take too long.Batteries are old, deeply discharged, or have reduced capacity.The charger has a repair mode for deeply discharged batteries. Allow it to run. If issues persist, the batteries may need replacement. Ensure batteries are NiMH/NiCd.
Laderen føles varm under bruk.Normal drift.It is normal for the charger and batteries to become slightly warm during charging. Ensure adequate ventilation. If it becomes excessively hot, unplug immediately and contact support.

9. Spesifikasjoner

Modell:ABSINA X4 (301001)
Kompatible batterityper:NiMH, NiCd
Compatible Battery Sizes:AA (Mignon), AAA (Micro), 9V (E-block)
Inngang Voltage:100-240V AC, 50-60Hz, 160mA
Output Current (AA/AAA):500mA per slot
Output Current (9V):13mA per slot
Charging Time (Approximate):
  • AAA (800mAh): ~2 hours
  • AA (2100mAh): ~5 hours
  • 9V (200mAh): ~18.5 hours
Spesielle funksjoner:Single Bay Monitoring, Battery Full Detection, Pulse Trickle Charge, Battery Defect Detection, Repair Mode, Multiple Overcharge Protection, Automatic Shutdown, LED Status Indicator
Produktdimensjoner:11.5 x 7.5 x 7 cm
Varevekt:102 g
ABSINA Charger Charging Time Table

Image 9.1: Packaging detail showing the charging time table for different battery capacities.

ABSINA Charger Features on Packaging

Image 9.2: Packaging detail highlighting key features such as worldwide applicability, battery repair mode, multiple overcharge protection, single bay monitoring, and microprocessor-controlled charging.

10. Garanti og støtte

ABSINA products are manufactured with quality and reliability in mind. For warranty information and technical support, please refer to the official ABSINA webnettstedet eller kontakt din forhandler.

Offisiell Webnettsted: www.absina.de

For further assistance, please contact ABSINA customer service.

© 2024 ABSINA. All rights reserved.

Modell: 301001

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.