ECTY 1162

ECTY LED Color Changing Rope Light User Manual

Model: 1162 | Brand: ECTY

Produkt overview

The ECTY LED Color Changing Rope Light is a versatile lighting solution designed for both indoor and outdoor use. This 18-foot rope light features 180 multicolor LEDs, offering a vibrant array of lighting options. It comes equipped with a remote control for convenient adjustment of its 8 distinct color settings and various animation modes.

180 multicolor LED lights for dynamic illumination.
8 distinct color settings to suit any mood or occasion.
Convenient remote control included for easy operation.

Pakkeinnhold

Sørg for at alle elementene er til stede før du fortsetter med installasjonen:

1 x 18 ft LED Rope Light
1 x Remote Control (CR2025 Battery Included)
1 x 2 fot strømledning
16 x Mounting Clips and Screws
1 x bruksanvisning

Oppsettveiledning

Follow these steps to set up your ECTY LED Color Changing Rope Light:

Unpack the Rope Light: Carefully remove the rope light and all accessories from the packaging.
Rull helt ut: Before plugging in, fully uncoil the rope light to prevent overheating and ensure proper operation.
Velg sted: Select a suitable location for installation. While rated for indoor/outdoor use, ensure the environment is within the specified temperature range (greater than -18°C / 0°F).
Montering (valgfritt): Use the provided mounting clips and screws to secure the rope light in your desired position. Ensure the light is securely fastened to prevent accidental falls.
Koble til strøm: Connect the 2 ft power cord to the rope light and then plug it into a standard 120V/60Hz electrical receptacle.

ECTY LED Color Changing Rope Light in its packaging, showing the coiled light and remote control.

This image displays the ECTY LED Color Changing Rope Light, coiled within its retail packaging. The remote control is also visible, highlighting the product's key features.

Bruksanvisning

Your ECTY LED Rope Light is controlled by the included remote. Ensure the remote's battery (CR2025) is properly installed.

Fjernkontrollfunksjoner:

Slå på/av: Bruk Makt knappen for å slå lysene av eller på.
Fargevalg: Press the colored buttons (Red, Green, Blue, White, Yellow, Cyan, Purple, Orange) to select a solid color.
Justering av lysstyrke: Bruk Lysstyrke opp/ned knapper for å øke eller redusere lysintensiteten.
Animation Modes: Cycle through various pre-programmed animation modes (e.g., Flash, Strobe, Fade, Smooth) using the dedicated mode buttons.
Hastighetskontroll: Adjust the speed of animation modes using the Hastighet opp/ned knapper.

Back of the ECTY LED Color Changing Rope Light packaging, showing product contents and warnings.

The back of the product packaging is shown, detailing the contents including the 18ft rope light, power cord, mounting clips, screws, and remote control. Important safety warnings and electrical specifications are also listed.

Vedlikehold

To ensure the longevity and optimal performance of your rope light, follow these maintenance guidelines:

Rengjøring: Gently wipe the rope light with a soft, damp cloth to remove dust or dirt. Do not use harsh chemicals or abrasive cleaners. Ensure the light is unplugged before cleaning.
Lagring: When not in use for extended periods, coil the rope light neatly and store it in a cool, dry place away from direct sunlight and extreme temperatures.
Undersøkelse: Periodically inspect the rope light and power cord for any signs of damage, such as cuts, fraying, or exposed wires. Discontinue use if any damage is found.

Feilsøking

If you encounter issues with your ECTY LED Color Changing Rope Light, refer to the following common solutions:

Problem	Mulig årsak/løsning
Lysene slår seg ikke på.	Sørg for at strømledningen er ordentlig koblet til en fungerende stikkontakt. Check if the remote control battery (CR2025) needs replacement. Verify the power button on the remote has been pressed.
Fjernkontrollen reagerer ikke.	Point the remote directly at the sensor on the rope light's power unit. Bytt ut CR2025-batteriet i fjernkontrollen. Ensure there are no obstructions between the remote and the sensor.
Noen LED-lamper lyser ikke.	This may indicate internal damage. Discontinue use and contact customer support.

Tekniske spesifikasjoner

Trekk	Detalj
Modellnummer	1162
Merke	ECTY
Lys type	LED tau lys
Lengde	18 fot (5.48 m)
Antall lysdioder	180
Fargeinnstillinger	8 (Multicolor)
Strømkilde	Elektrisk med ledning
Voltage	120V / 60Hz
Wattage	18 watt
Kontrollertype	Fjernkontroll
Eksternt batteri	CR2025 (inkludert)
Innendørs/utendørs bruk	Innendørs
Materiale	Plast
Varevekt	1.83 pund
Produktdimensjoner	4 x 9 x 8 tommer
UPC	840072812206

Note: This device is not intended for use with emergency exits. For use in environments greater than -18°C / 0°F.

Garanti og støtte

This ECTY LED Color Changing Rope Light comes with a 1 års begrenset garanti fra kjøpsdatoen. Denne garantien dekker produksjonsfeil og utførelse ved normal bruk.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ECTY customer support. Refer to the product packaging or the manufacturer's webnettstedet for den mest oppdaterte kontaktinformasjonen.

Viktig sikkerhetsinformasjon:

Risiko for elektrisk støt: Slå av strømmen før inspeksjon, installasjon eller fjerning.
Ikke åpne - ingen deler som kan repareres av brukeren inni.
Advarsel om knappebatteri: Dette produktet inneholder et knappebatteri. Hvis den svelges, kan den forårsake alvorlig skade eller død på bare 2 timer. Oppsøk lege umiddelbart.