Lepro 20W LED Floodlight (2-Pack) Instruction Manual

1. Introduksjon

Thank you for choosing the Lepro 20W LED Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new floodlights. Please read these instructions carefully before use and retain them for future reference.

Image 1.1: Two Lepro 20W LED Floodlights with power cable. These floodlights are designed for outdoor use, providing bright and efficient illumination.

2. Sikkerhetsinstruksjoner

For å sikre sikker drift, følg alltid disse retningslinjene:

• Elektrisk sikkerhet: Ensure the power supply is disconnected before installation or maintenance. All electrical connections must comply with local wiring regulations. If unsure, consult a qualified electrician.
• Jording: Flomlyset må være skikkelig jordet for å forhindre elektrisk støt.
• Voltage: Kontroller at forsyningen voltage matches the floodlight's rated voltage (240 volt AC).
• Vannmotstand: The product is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, do not submerge the unit in water.
• Varme: The floodlight generates heat during operation. Do not cover the unit or install it in an enclosed space without adequate ventilation.
• Montering: Sørg for at monteringsflaten er sterk nok til å bære vekten av flomlyset.
• Lyskilde: Ikke se direkte inn i LED-lyskilden når den er tent, da dette kan forårsake overanstrengelse eller skade på øynene.

3. Pakkens innhold

Pakken din bør inneholde følgende varer:

• 2 x Lepro 20W LED Floodlights
• Bruksanvisning (dette dokumentet)

4. Produktfunksjoner

The Lepro 20W LED Floodlight offers the following key features:

• Ultra-Bright and Energy-Efficient: Utilizes SMD 2835 LEDs and an optimized reflector design to deliver 1700 lumens of daylight white light (5000K) with only 20W of power consumption, equivalent to a 140W halogen lamp.
• Holdbar og værbestandig: Constructed from die-cast aluminum and tempered glass, with an IP65 rating for resistance against dust and water, suitable for all weather conditions.
• Effektiv varmespredning: Features an ultra-thin housing and integrated heat sink design for effective heat management, extending the product's lifespan.
• Vid strålevinkel: Provides a 110° beam angle for broad illumination coverage.
• 360° Rotatable Bracket: The mounting bracket allows for 360° rotation, enabling flexible adjustment of the light direction.
• Enkel installasjon: Designed for straightforward installation on various surfaces.

Image 4.1: Key lighting specifications of the floodlight, including LED quantity, color temperature, brightness, and beam angle.

Image 4.2: Illustration of the floodlight's coverage, demonstrating that 20W provides 1700 lumens, effectively illuminating a 5-meter diameter area when mounted at 4 meters height.

Image 4.3: The rear of the floodlight, illustrating the heat dissipation fins designed to efficiently release heat and prolong the product's lifespan.

Image 4.4: The 360° rotatable bracket, allowing for flexible adjustment of the light direction to suit various illumination needs.

Image 4.5: Demonstrates the floodlight's durability and weather resistance, highlighting its IP65 waterproof rating, heat resistance, and frost resistance for reliable performance in diverse outdoor conditions.

5. Spesifikasjoner

Image 5.1: Detailed dimensions of the floodlight, including length, width, and height, along with cable length, provided in both millimeters and inches for precise planning.

6. Installasjon

Følg disse trinnene for riktig installasjon:

1. Preparat: Before starting, ensure the power supply is turned off at the main circuit breaker.
2. Monteringssted: Choose a suitable location for the floodlight. The included bracket allows for mounting on walls, ceilings, or directly on the ground.
3. Merking: Use the bracket as a template to mark the drilling points on the desired surface.
4. Boring: Drill holes at the marked points. Insert appropriate wall plugs if mounting on masonry.
5. Sikker brakett: Attach the bracket securely to the surface using screws (not included). The bracket features 2 self-locking screws for easy removal of the spot without tools.
6. Juster vinkel: The bracket is 360° rotatable. Adjust the floodlight to the desired angle before tightening the bracket screws.
7. Kabling: Connect the floodlight's 1-meter power cable to your electrical supply. Ensure correct wiring: brown wire for Live, blue wire for Neutral, and green/yellow wire for Ground. Use a waterproof junction box for outdoor connections (not included).
8. Sluttsjekk: Double-check all connections and ensure the floodlight is securely mounted.
9. Strøm på: Gjenopprett strømmen ved hovedsikringen.

Image 6.1: Various installation methods for the floodlight, demonstrating its versatility for mounting on walls, ground, or ceilings.

7. Drift

Once installed and connected to a power source, the Lepro 20W LED Floodlight will illuminate when power is supplied. There are no additional controls on the unit itself. Operation is typically controlled via an external switch or timer connected to the power circuit.

Bilde 7.1: Eks.amples of the floodlight in various applications, including residential and commercial outdoor spaces, showcasing its effective illumination.

8. Vedlikehold

The Lepro LED Floodlight requires minimal maintenance:

• Rengjøring: Periodically clean the glass surface with a soft, damp cloth to ensure optimal light output. Do not use abrasive cleaners or solvents.
• Undersøkelse: Regularly inspect the power cable and housing for any signs of damage. If damage is found, disconnect power immediately and have the unit inspected by a qualified professional.
• Ingen deler som kan repareres av brukeren: The LED light source is integrated and not replaceable by the user. Do not attempt to open the housing.

9. Feilsøking

Hvis du støter på problemer med flomlyset ditt, kan du se følgende vanlige problemer og løsninger:

If the problem persists after attempting these solutions, please contact Lepro customer support.

10. Garanti og støtte

Lepro products are designed for reliability and performance. For warranty information or technical support, please refer to the official Lepro webnettstedet eller kontakt kundeservicen deres direkte. Ta vare på kjøpskvitteringen som kjøpsbevis.

For mer informasjon, besøk Lepro Store.