3Dconnexion CadMouse Pro 3DX-700080 User Manual

1. Introduksjon

The 3Dconnexion CadMouse Pro 3DX-700080 is a purpose-built wired mouse designed for design and engineering professionals. It features advanced ergonomics and precise calibration to provide exceptional comfort and silent operation. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your CadMouse Pro.

2. Pakkens innhold

Bekreft at alle varene er til stede i pakken:

• 3Dconnexion CadMouse Pro 3DX-700080
• Hurtigstartveiledning (hvis inkludert)
• Garantiinformasjon (hvis inkludert)

3. Oppsett

3.1 Connecting the CadMouse Pro

The CadMouse Pro is a wired USB device. To connect it to your computer:

1. Finn en ledig USB-port på datamaskinen.
2. Insert the USB connector of the CadMouse Pro into the USB port.
3. The operating system should automatically detect the device.

3.2 Driverinstallasjon

For full functionality and customization of your CadMouse Pro, it is recommended to install the latest 3Dconnexion drivers and software.

• Visit the official 3Dconnexion webnettsted: www.3dconnexion.com/drivers
• Download and install the appropriate drivers for your operating system.
• Følg instruksjonene på skjermen for å fullføre installasjonen.

Figur 1: Øverst view of the CadMouse Pro, highlighting the primary buttons and scroll wheel.

4. Operating the CadMouse Pro

The CadMouse Pro is designed with specific features to enhance your CAD workflow.

4.1 Knappefunksjoner

• Venstreklikk-knapp: Standard primær klikkfunksjon.
• Høyreklikk-knapp: Standard sekundær klikkfunksjon.
• Middle Mouse Button: Dedicated button for CAD applications, often used for pan, zoom, or orbit functions.
• Rullehjul: Used for scrolling documents and zooming in/out in CAD applications (Smart Mouse Wheel 2).
• QuickZoom Buttons: Two dedicated buttons located on the side for quick zoom in and zoom out functionality.
• Programmerbare knapper: Five buttons are programmable via the 3Dconnexion driver software for custom commands and macros.

Figur 2: Side view of the CadMouse Pro, illustrating the QuickZoom buttons.

4.2 Smart Mouse Wheel 2

The Smart Mouse Wheel 2 offers adaptive scrolling speed and precision. It can switch between click-to-click and hyper-fast scrolling modes depending on the application and user input.

4.3 QuickZoom

The dedicated QuickZoom buttons allow for instant zooming in and out of your CAD models or documents with a single press. This feature can be configured through the 3Dconnexion software.

5. Vedlikehold

5.1 Rengjøring

To maintain optimal performance and hygiene, clean your CadMouse Pro regularly:

• Koble musen fra datamaskinen.
• Bruk en myk, lofri klut litt dampavsluttes med vann eller en mild rengjøringsløsning.
• Wipe the surface of the mouse gently. Avoid excessive moisture.
• Ikke bruk sterke kjemikalier, slipende rengjøringsmidler eller løsemidler.
• Clean the optical sensor on the underside with a dry cotton swab if necessary.

Figur 3: Forside view of the CadMouse Pro, illustrating its ergonomic design.

5.2 Oppbevaring

Store the CadMouse Pro in a clean, dry environment away from extreme temperatures and direct sunlight when not in use for extended periods.

6. Feilsøking

If you encounter issues with your CadMouse Pro, refer to the following common solutions:

• Musen svarer ikke:
  • Ensure the USB cable is securely connected to both the mouse and the computer.
  • Prøv å koble musen til en annen USB-port.
  • Start datamaskinen på nytt.
• Buttons or scroll wheel not working correctly:
  • Verify that the 3Dconnexion drivers are installed and up to date.
  • Check the 3Dconnexion control panel for any custom settings that might be interfering.
  • Test musen på en annen datamaskin for å utelukke et systemspesifikt problem.
• Markørbevegelsen er uregelmessig eller upresis:
  • Rengjør den optiske sensoren på undersiden av musen.
  • Ensure you are using the mouse on a suitable surface (e.g., a mouse pad, not highly reflective surfaces).
  • Check driver settings for sensor sensitivity.

Figur 4: Underside view of the CadMouse Pro, showing the optical sensor.

7. Spesifikasjoner

8. Garanti og støtte

For detailed warranty information, product registration, and technical support, please visit the official 3Dconnexion webnettstedet eller kontakt deres kundeservice.

• Offisiell Webnettsted: www.3dconnexion.com
• Støtteside: Se til website for specific support contact details and FAQs.